Blitz BZKT1.2 QUICK START GUIDE

1.2 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT

1.2 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT

WIRING DIAGRAM

BLITZ 1.2 Farad
Power Capacitor
(Supplied)

4ft of 4 ga Power &
Ground Wire (Supplied)

0/4 ga Main Power & Ground wire
Distribution Block(Supplied)

Power Source(Battery)

Power to Amplifier

Your Amplifier

www.blitzaudio.com

BZKT12

WIRING DIAGRAM

Power Source(Battery)

BLITZ 1.2 Farad
Power Capacitor
(Supplied)

4ft of 4 ga Power &
Ground Wire (Supplied)

0/4 ga Main Power & Ground wire
Distribution Block(Supplied)

QUICK & EASY INSTALLATION

1. Disconnect vehicle's battery.

2. Select mounting location for capacitor

3. Select a convenient location for installation of the distribution block.

4. Cut power and ground wires to existing amp or route wires to block for

a new install.

5. Connect the wires so they continue through the distribution block

on to the amp.

6. Connect ring terminals on power and ground wires to

capacitor and route wires to distribution block.

7. Cut wires to length and make connection.

8. Reconnect battery and enjoy a better sounding

system!

Power to Amplifier

BZKT12

Your Amplifier

www.blitzaudio.com