Blitz BZCAP30 User Manual

SPECIFICATIONS

Model: BZCAP30

3 Farad TRIANGLE Hybrid Super Capacitor
With Red Digital Voltage Display, Blue Flash LED, Blue Led Ring

Capacitance .................................……......3,000,000 micro farad

Working Voltage ...............................…….….. 21DC

Surge Voltage .......................................……… 24DC

E.S.R. (Equivalent Series Resistance)------ 0.0015 ohm @120hz/ 25°C
Capacitance Tolerance------------------------ ± 10%

DETAILED FEATURES:

a) 4 digits hi-end red light display DC voltage meter that can measure 0.1 DCV range.
b) Reverse pole connecting PCB buzz warning function. If the capacitor is connected

incorrectly by reversing the positive and negative wires during the installation

process the PCB will issue a 45 second noise to warn you.
c) Hi-end platinum plated 100% brass solid parts and chrome plated metal cover
d) Over voltage limit and low battery voltage limit warning. When the system voltage

peeks over 17.5 DCV or LESS than 10 DCV. The buzzer on the PCB will issue an

audible noise warning.
e) Multiple small capacitance capacitors linked to provide the lowest inner E.S.R. and

largest moment discharge power.

1

INSTALLATION AND MOUNTING:

You must first attach the mounting tabs to the capacitor before mounting it. Use the
supplied hardware shown in the picture to the right. Notice the small mounting screw
hole in the capacitor chassis.

CHARGING THE CAPACITOR AND WIRING:

The capacitor must be charged before connecting the Power and Ground cables to the
capacitor. Failure to charge the capacitor will result in a large spark generated from the
rapid inflow of current.

2