Blitz BZA3000D User Manual

All Blitz products are carefully constructed and thoroughly tested before

shipment. Products purchased in the USA are warranted to be free of defects

in material and workmanship for two (2) years from the date of purchase. This

warranty is limited to the original retail purchase.

Should the product fail due to factory defects in material or workmanship,

your unit will be repaired or replaced at the sole discretion of Blitz.

To obtain warranty service you must first call our Consumer Return Hotline

number at [phone] to obtain a Return Authorization number. This

R.A.# must appear on the outside of your package and on all paperwork

relating to your return.

When returning a product to us for warranty service it must be carefully packed

and shipped prepaid to:

You must also include the following items:

• A copy of your sales receipt or other proof of purchase

• A brief letter indicating the problem you are experiencing

• include in your letter your return address, daytime phone number,

and R.A. number

• also include a check or money order for $18.00 for return shipping,

handling, and insurance, or provide your Visa/MC number with

expiration date.

R.A.#

Blitz Service Center

1600 63rd Street

Brooklyn, NY 11204

Our obligation under this warranty is limited to the repair or

replacement of the defective unit when it is returned to us prepaid.

This warranty will be considered void if the unit was tampered with,

improperly serviced, or subject to misuse, neglect, or accidental

damage.

limited warranty policy

www.blitzaudio.com

amplifiers

BZA-3000D

Class-D mono block MOSFET neon car audio amplifier

user’s manual

This is due to the noise introduced into the signal by the switching
speed of the power supply, which must be filtered out of the audio
signal.
The power supply incorporated into Blitz amplifier is a DC to DC
switching power supply designed to have adequate headroom for
even the most demanding peak and dynamic range found on
today's CDs and recording.

INTRODUCTION...

table of contents

Thank you for purchasing the Blitz Class-D amplifier.
Rest assured you have purchased a quality product designed
and engineered to give you many years of uncompromised
musical service.The Blitz Class-D amplifier has been designed
using the latest in electronic technology available today.

This mono subwoofer amplifier is the result of advanced high
speed switching technology that overcomes the less-efficient
Class-D design. the Blitz Class-D amplifier reflects
your true appreciation for powerful bass reproduction in the
mobile environment.
This amplifier is designed for low-frequency information only and
it is not capable of reproducing any mid/high-frequency information.

features and specifications

BZA-3000D

3-4

protection circuitry and troubleshooting

8

amplifier and installation

7

general features

2

system wiring

5-6

BZA-3000D