Blendtec Professional User Manual

PROFESSIONAL

SERIES

OWNER’S MANUAL AND USER GUIDE

TABLE OF CONTENTS

SECTION 1 - IMPORTANT SAFEGUARDS ��2 SECTION 2 - UNPACKING �� 4

SECTION 3 - GETTING TO KNOW YOUR BLENDER �� 4 SECTION 4 - INSTALLATION & OPERATIONAL OVERVIEW ��5

4.1 - PROFESSIONAL 750™ ��5

4.2 - PROFESSIONAL 800™ ��10 SECTION 5 - CARE AND CLEANING ��13 SECTION 6 - TROUBLESHOOTING ��14 SECTION 7 - WARRANTY ��16

SECTION 1: IMPORTANT SAFEGUARDS

IMPORTANT INFORMATION

Read all instructions carefully before using your Blendtec® blender� Following these instructions will help prevent injuries and damage to the machine and will ensure that you have the best possible experience with your new blender�

1.1 AVOID CONTACT WITH MOVING PARTS

• ALWAYS keep ﬁngers, hands, hair and clothing away from all moving parts�

• ALWAYS keep all utensils away from the drive socket and blender jar blades during operation as utensils may damage blades or the blender jar�

• NEVER put hands into the blender jar or add substances by hand when the blender jar is on the motor base�

• NEVER touch the blade with your ﬁngers whether it is on or off the motor base�

• NEVER place jar into drive socket if blender motor is operating�

• DO NOT rock or remove the blender jar during operation�

These precautions will prevent personal injur y and/or damage to the blender�

1.2 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

If the blender malfunctions, call your service agent ﬁrst� If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment or possible replacement�

1.3 NEVER OPERATE BLENDER IN LIQUID

To protect against the risk of electrical shock do not put the motor base in water or other liquid� Do not use the blender outdoors where it is subject to precipitation�

1.4 NEVER PUT NON-FOOD ITEMS INTO JAR

Utensils, rocks and glass are dangerous if placed in jar� Damage caused by such foreign objects will void the warranty� Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the blender� Utensils may only be used when the blender is not running�

1.5 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

1.6 NEVER OPERATE THE BLENDER USING ATTACHMENTS

NOT SOLD BY BLENDTEC

The use of any unauthorized attachments may cause ﬁre, electric shock, and/or injury and will void the warranty�

1.7 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING

1.8 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER HOT INGREDIENTS

Starting blend cycles with boiling or very hot liquids may result in burns or cause the lid to blow off�

1.9 USE CAUTION WHEN BLENDING ON THE HOT SOUP CYCLE

When blending on the Hot Soup cycle, friction of the blade will heat the contents� The lid will allow pressure relief� Be careful not to come in contact with any steam coming from the clear center lid�

1.10 POWER CORD PRECAUTIONS

• NEVER operate with a damaged cord or plug� If the supply cord is damaged it must be replaced by the manufacturer or authorized service agent to avoid a hazard�

• DO NOT permit the cord to hang over the edge of the work surface�

• NEVER use an extension cord with the unit�

• Unplug the blender motor when not in use, before changing blender locations or cleaning�

1.11 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover� The blender motor does not contain self-adjustable or serviceable parts� A qualiﬁed service agent must make all service adjustments� Removing the cover or attempting to service the blender will void the warranty�

1.12 TURN THE POWER TO THE BLENDER OFF WHEN NOT IN USE

1.13 AVOID TOUCHING THE BLENDER DRIVE SOCKET OR JAR SHAFT AFTER USE!

The blender drive socket and jar shaft may become very hot after blend cycles�

1.14 SAFETY

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety� Children should be supervised to ensure that they do not play with the appliance�

1.15 THIS BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE OF THE BLENDER FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES

1.16 NEVER OPERATE THE BLENDER WITH MORE THAN THE MARKED CAPACITY OF THE JAR

SAVE THESE INSTRUCTIONS

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE

2.1 UNPACKING YOUR BLENDER

You should have received the following items:

• Professional series blender motor base

• Blender jar with lid

Additional literature may be included depending on package conﬁguration�

1� Remove blender motor base, blender jar and lid from packaging�

2� Unwind the power cord�

3� Check for any packing material that may have blocked ventilation holes on the

underside of the blender motor base�

4� Inspect all items to ensure no damage occurred during shipment�

5� If any damage has occurred, contact Blendtec customer service (see page 17)

immediately�

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Record your blender motor serial number and date of purchase in the space below� You will need these when contacting Blendtec for service or questions�

Motor Serial #(Found on bottom of motor base):_________________________

Date of Purchase: ______________________________________________

Purchased From: _______________________________________________

2.3 REGISTERING YOUR BLENDER

SECTION 3: GETTING TO KNOW YOUR BLENDER

(Refer to Figures 1 and 2 on Page 6)

3.1 BLENDER MOTOR BASE

• Smart Touch Interface: The interface consists of one-touch pre programmed cycles and speeds, as well as Stop and Pulse buttons�

• Hardened Metal Drive Socket: This is where the jar couples with the motor to turn the blade assembly� It is made of hardened metal�

• LCD Information Center: This displays how many blend cycles your blender has run, remaining time during blends, and any error messages�

• Power Unit: This unit is located within the blender motor base and contains the computerized electronics that run the blender�

• Motor Base Cover: This durable plastic material houses the power unit�

• Power Cord: The power cord is located at the back of the motor base cover�

3.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid�

• Jar: The jar is durable, BPA-free, and easy to clean�

• Blade Assembly: The uniquely designed stainless steel blade provides fast, consistent blending�

• Lid: The lid seals liquids within the jar during blending�

NOTE: Filling the blender jar beyond the marked capacity is not recommended.

SECTION 4: INSTALLATION & OPERATIONAL OVERVIEW

4.1 PROFESSIONAL 750™

4.1.1 INSTALLATION

Above Counter Installation

1� Place the blender on a ﬂat, clean, and dry surface� Blender vents should be

unobstructed to allow proper cooling during use�

2� Make sure an outlet is available within two feet of the blender motor�

3� Place appropriately ﬁlled blender jar, with lid in place, onto blender base�

4� We recommend that surge protection be placed between the receptacle and

the blender motor on the circuit connected to the blender motor�

Preparation for In-Counter Installation

1� Identify the best place to install your blender� Consider proximity to ingredients,

available counter space, and access to a power outlet�

2� Ensure that the location meets all dimensional requirements (see Figure 3)�

a� The countertop must be no thicker than 1 1/4 inch (32 mm) to ensure

adequate ventilation�

NOTE: Ensure sufﬁcient air circulation beneath the blender base. Hot air should not be trapped beneath the counter top. Nothing should be stored within 3 inches (76 mm) of the bottom of the motor.

3� Cut a hole in the counter top 4 ⅜ inches (111 mm) wide and 5 ⅞ inches (149

mm) long with the shorter side facing the operator (See Countertop Hole Template or Figure 3)� Make sure all space requirements and measurements are correct BEFORE cutting� It is recommended that you consult with a professional before cutting�

In-Counter Installation

1� Remove the motor base from the motor base cover�

2� Slide the blender base into the new hole in your countertop, the LCD indicator

and touchpad facing the operator side of the blender� The rubber gasket on the rim of the motor base should ﬁt into the hole and rest lightly on the countertop�

3� Make sure the power switch is off� Plug the unit into a 120 volt outlet with

15 amp protection�

+ 8 hidden pages

Blendtec Professional User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual