Blendtec 575, 570, 475, 560 User Manual

CLASSIC SERIES

OWNER’S MANUAL AND USER GUIDE

1

TABLE OF CONTENTS

SECTION 1 - IMPORTANT SAFEGUARDS �����������������������������������������������������������1
SECTION 2 - UNPACKING ������������������������������������������������������������������������������������������������ 3

SECTION 3 - GETTING TO KNOW YOUR BLENDER �������������������������������� 3

SECTION 1: IMPORTANT SAFEGUARDS

IMPORTANT INFORMATION

Read all instructions carefully before using your Blendtec® blender�

Following these instructions will help prevent injuries and damage to the machine and will
ensure that you have the best possible experience with your new series blender�

SECTION 4 - INSTALLATION ������������������������������������������������������������������������������������������� 4
SECTION 5 - OPERATIONAL OVERVIEW ������������������������������������������������������������6
SECTION 6 - CARE AND CLEANING �������������������������������������������������������������������12
SECTION 7 - TROUBLESHOOTING �����������������������������������������������������������������������12
SECTION 8 - WARRANTY �����������������������������������������������������������������������������������������������14

1.1 AVOID CONTACT WITH MOVING PARTS

• ALWAYS keep fingers, hands, hair and clothing away from all moving parts�

• ALWAYS keep all utensils away from the drive socket and blender jar blades during
operation as utensils may damage blades or the blender jar�

• NEVER put hands into the blender jar or add substances by hand when the
blender jar is on the motor base�

• NEVER touch the blade with your fingers whether it is on or off the motor base�

• NEVER place jar into drive socket if blender motor is operating�

• DO NOT rock or remove the blender jar during operation�

These precautions will prevent personal injury and/or damage to the blender�

1.2 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

If the blender malfunctions, call your service agent first� If it is dropped or damaged
in any way, return the blender to a Blendtec service agent immediately for
examination, repair, electrical or mechanical adjustment, or possible replacement�

1.3 NEVER OPERATE BLENDER IN LIQUID

To protect against the risk of electrical shock do not put the motor base in
water or other liquid� Do not use the blender outdoors where it is subject to
precipitation� This will void the warranty�

1.4 NEVER PUT NON-FOOD ITEMS INTO JAR

Utensils, rocks, and glass are dangerous if placed in jar� Damage caused by such
foreign objects will void the warranty� Keep hands and utensils out of jar while
blending to reduce the risk of severe injury to persons or damage to the blender�
Utensils may only be used when the blender is not running�

1.5 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

1.6 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT

SOLD BY BLENDTEC

The use of any unauthorized attachments may cause fire, electric shock, and/or
injury and will void the warranty�

1.7 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE
APPLIANCE IS OPERATING

1

1.8 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER
HOT INGREDIENTS

Starting blend cycles with boiling or very hot liquids may result in burns or cause
the lid to blow off�

1.9 USE CAUTION WHEN BLENDING ON THE HOT SOUP CYCLE

When blending on the Hot Soup cycle, friction of the blade will heat the contents�
The vented lid will allow pressure relief� Be careful not to come in contact with any
steam coming from the clear center lid�

1.10 POWER CORD PRECAUTIONS

• NEVER operate with a damaged cord or plug� If the supply cord is damaged it must
be replaced by the manufacturer or authorized service agent to avoid a hazard�

• DO NOT permit the cord to hang over the edge of the work surface�

• NEVER use an extension cord with the unit�

• Unplug the blender motor when not in use, before changing blender locations, or
when cleaning�

1.11 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover� The blender motor does not contain
self-adjustable or serviceable parts� A qualified service agent must make all
service adjustments� Removing the cover or attempting to service the blender
will void the warranty�

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE

2.1 UNPACKING YOUR BLENDER

You should have received the following items:

• Classic series motor base

• Blender jar with lid

Additional literature may be included depending on package configuration�

1� Remove blender motor base, blender jar, and lid from packaging�

2� Unwind the power cord�

3� Check for any packing material that may have blocked ventilation holes on the

underside of the blender motor base�

4� Inspect all items to ensure no damage occurred during shipment�

5� If any damage has occurred, contact your Blendtec service agent immediately�

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Record your blender motor serial number and date of purchase in the space below�
You will need these when contacting Blendtec for service or questions�

Motor Serial #(Found on bottom of motor base):_________________________

Date of Purchase: ______________________________________________

Purchased From: _______________________________________________

1.12 TURN THE POWER SWITCH OFF WHEN NOT IN USE

The Power Switch (ON/OFF switch) is located on the back of the blender motor cover�

1.13 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER
EXTENSIVE USE

The blender drive socket may become hot after numerous cycles�

1.14 SAFETY

This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety� Children should be
supervised to ensure that they do not play with the appliance�

1.15 THE BLENDER IS INTENDED FOR HOME USE ONLY! ANY
USE OF THIS BLENDER FOR COMMERCIAL PURPOSES
VOIDS ALL WARRANTIES

1.16 NEVER OPERATE THE BLENDER WITH MORE THAN THE
MARKED CAPACITY OF THE JAR

SAVE THESE INSTRUCTIONS

2.3 REGISTRATION OF YOUR BLENDER

Register online at www�blendtec�com/registration

SECTION 3: GETTING TO KNOW YOUR BLENDER

(Refer to Figures 1 and 2)

3.1 BLENDER MOTOR BASE

• Touchpad: Consists of one-touch pre programmed cycles and speeds, as well as
Stop and Pulse buttons�

• Hardened Metal Drive Socket: Where the jar couples with the motor to turn the
blade assembly; made of hardened metal�

• LCD Information Center: Displays the number of times a blend cycle button has
been pressed�

• Power Unit: This unit is located within the blender motor base and contains the
computerized electronics that run the blender�

• Motor Base Cover: Houses the power unit in a durable, plastic material�

• Power Switch: Located on the back lower-right corner of the motor base cover�

• Power Cord: Located at the back of the motor base cover�

32

3.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid�

• Jar: Durable, BPA-free jar; easy to clean�

• Blade Assembly: Uniquely designed stainless steel blade provides fast,
consistent blending�

• Lid: Vented gripper lid seals liquids within the jar during blending�

NOTE: Filling the blender jar beyond the marked capacity is not recommended.

SECTION 4: INSTALLATION

1� Place the blender on a flat, clean, and dry surface� Blender vents should be

unobstructed to allow proper cooling during use�

2� Make sure an outlet is available within two feet (61cm) of the blender motor�

3� Ensure the Power Switch located on the back of the motor base is turned off before

plugging it in�

4� Turn unit on by toggling the Power Switch to the ON position�

5� Place appropriately filled blender jar, with lid in place, onto blender base�

54