Blendtec 2014 Designer User Manual

DESIGNER SERIES

OWNER’S MANUAL AND USER GUIDE

TABLE OF CONTENTS

SECTION 1 - IMPORTANT SAFEGUARDS ��1 SECTION 2 - UNPACKING �� 3

SECTION 3 - GETTING TO KNOW YOUR BLENDER �� 4

SECTION 4 - INSTALLATION �� 4

SECTION 5 - OPERATIONAL OVERVIEW ��6

SECTION 6 - CARE AND CLEANING ��15

SECTION 7 - TROUBLESHOOTING ��16

SECTION 8 - WARRANTY ��18

SECTION 1: IMPORTANT SAFEGUARDS

IMPORTANT INFORMATION

Read all instructions carefully before using your Designer series blender�

This important information has been provided as required by the North American standards indicated below� Following these instructions will help prevent injuries and damage to the machine and will ensure that you have the best possible experience with your Designer series blender�

1.1 SAFETY CERTIFICATION

Designer series blenders are certiﬁed by ETL under Blendtec® in the ETL Ofﬁcial Listing� Conforms to ANSI/UL Std� 982 and Cert� to CAN/CSA Std� C22�2#195�

This certiﬁcation ensures that your Designer series blender has been tested for electrical and mechanical safety� The standards indicated have been developed over many years to prevent injury, ﬁre, and damage� Part of the process includes quarterly audits to ensure that Blendtec is producing equipment to these stringent criteria�

1.2 NSF CERTIFICATION

Items included in the box which bear the NSF® mark are certiﬁed by NSF International (NSF) under Blendtec in the NSF Ofﬁcial Listing�

This certiﬁcation ensures that your Designer series blender has been tested for food (sanitation) safety� The standards utilized have been developed over many years to prevent contamination from toxic substances and to ensure ease of cleaning� Part of the certiﬁcation process includes an annual audit to ensure that Blendtec is producing equipment to these stringent criteria�

1.3 AVOID CONTACT WITH MOVING PARTS

• ALWAYS keep ﬁngers, hands, hair and clothing away from all moving parts�

• ALWAYS keep all utensils away from the drive socket and blender jar blades during operation as utensils may damage blades or the blender jar�

• NEVER put hands into the blender jar or add substances by hand when the blender jar is on the motor base�

• NEVER touch the blade with your ﬁngers whether it is on or off the motor base�

• NEVER place jar into drive socket if blender motor is operating�

• DO NOT rock or remove the blender jar during operation�

These precautions will prevent personal injury and/or damage to the blender�

1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

If the blender malfunctions, call your service agent ﬁrst� If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment, or possible replacement�

1

1.5 NEVER OPERATE BLENDER IN LIQUID

To protect against the risk of electrical shock do not put the motor base in water or other liquid� Do not use the blender outdoors where it is subject to precipitation�

1.6 NEVER PUT NON-FOOD ITEMS INTO JAR

Utensils, rocks, and glass are dangerous if placed in jar� Damage caused by such foreign objects will void the warranty� Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the blender� Utensils may only be used when the blender is not running�

1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT

SOLD BY BLENDTEC

The use of any unauthorized attachments may cause ﬁre, electric shock, and/or injury and will void the warranty�

1.9 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING

1.10 BLADES ARE SHARP! HANDLE CAREFULLY!

1.11 WARNING, DO NOT BLEND HOT LIQUIDS OR OTHER

HOT INGREDIENTS

1.12 USE CAUTION WHEN BLENDING ON THE SOUP CYCLE

When blending on the Hot Soup cycle, friction of the blade will heat the contents� The vented lid will allow pressure relief� Be careful not to come in contact with any steam coming from the clear center lid�

1.13 POWER CORD PRECAUTIONS

• NEVER operate with a damaged cord or plug� If the supply cord is damaged

it must be replaced by the manufacturer or authorized service agent to avoid a hazard�

• DO NOT permit the cord to hang over the edge of the work surface�

• NEVER use an extension cord with the unit�

• Unplug the blender motor when not in use, before changing blender

locations, or cleaning�

1.14 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover� The blender motor does not contain selfadjustable or serviceable parts� A qualiﬁed service agent must make all service adjustments� Removing the cover or attempting to service the blender will void the warranty�

2

1.15 TURN THE BLENDER OFF WHEN NOT IN USE

1.16 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER

EXTENSIVE USE

The blender drive socket may become hot after numerous cycles�

1.17 SAFETY

This appliance is not intended for use by persons (including children with lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety� Children should be supervised to ensure that they do not play with the appliance�

1.18 DESIGNER SERIES BLENDERS ARE INTENDED FOR HOME USE ONLY! ANY USE OF THE DESIGNER SERIES BLENDER FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES

1.19 NEVER OPERATE THE BLENDER WITH MORE THAN THE MARKED CAPACITY OF THE JAR

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE

2.1 UNPACKING YOUR BLENDER

You should have received the following items:

• Designer series blender motor base

• Blender jar with lid

• Blendtec 101 booklet

• Customer Service and Warranty Registration Card

Additional literature may be included depending on package conﬁguration

1� Remove blender motor base, blender jar, and lid from packaging� 2� Unwind the power cord� 3� Check for any packing material that may have blocked ventilation holes on the

underside of the blender motor base�

4� Inspect all items to ensure no damage occurred during shipment�

5� If any damage has occurred, contact your Blendtec service agent immediately�

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Record your blender motor serial number and date of purchase in the space below� You will need these when contacting Blendtec for service or questions�

Motor Serial #(Found on bottom of motor base):________________________

Date of Purchase: ______________________________________________

Purchased From: ______________________________________________

3

2.3 REGISTRATION OF YOUR BLENDER

Register online at www�blendtec�com/registration

SECTION 3: GETTING TO KNOW YOUR BLENDER

(Refer to Figures 1 and 2)

3.1 BLENDER MOTOR BASE

• Smart Touch Interface: Consists of preprogrammed cycles, capacitive touch slider, and various one-touch settings, depending on model�

• Hardened Metal Drive Socket: Where the jar couples with the motor to turn the blade assembly; made of hardened metal�

• LED Information Center: Displays the number of times a blend cycle button has been pressed, the time left to blend, and error messages�

• Power Unit: This unit is located within the blender motor base and contains the computerized electronics that run the blender�

• Motor Base Cover: Houses the power unit in a durable, plastic material�

• Power Cord: Located at the back of the motor base cover�

3.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid�

• Jar: Durable, BPA-free jar; easy to clean

• Blade Assembly: Uniquely designed stainless steel blade provides fast, consistent blending

• Lid: Vented gripper lid seals liquids within the jar during blending

NOTE: Filling the blender jar beyond the marked capacity is not recommended.

SECTION 4: INSTALLATION

1� Place the blender on a ﬂat, clean, and dry surface� Blender vents should be

unobstructed to allow proper cooling during use�

2� Make sure an outlet is available within two feet (61cm) of the blender motor�

3� Place appropriately ﬁlled blender jar, with lid in place, onto blender base�

4� We recommend that surge protection be placed between the receptacle and

the blender motor�

4

FIGURE 1: BLENDER JAR ASSEMBLY

Lid

Jar

Blade Assembly

The jar shown above is the W ildsi de+™ Jar

FIGURE 2: MOTOR BASE

Blender Drive Socket

LED Information Center

Clear Vented Cap Insert

Smart Touch Interface

Power Unit

Motor Base Cover

Power Cord located in back

Motor Base Cover

5

Blendtec 2014 Designer User Manual [nl]

Specifications and Main Features

Frequently Asked Questions

User Manual