Blaze BLZICEMKR50GR User Manual

Automatic Outdoor Ice Maker

User’s Manual

Be sure ice maker is standing upright 24 hours prior to plug-in.

Model: BLZ-ICEMKR-50GR

TABLE OF CONTENTS

Page

ICE MAKER SAFETY ......................................................................................... 2

IMPORTANT SAFEGUARDS ........................................................................ 3 - 5

TECHNICAL INFORMATION .............................................................................. 5

COMPONENT LOCATIONS ............................................................................... 6

ICE MAKER INSTALLATION ....................................................................... 7 - 13

Unpacking .................................................................................................. 7

Location requirements .......................................................................... 7 - 9

Electrical requirements .............................................................................. 9

Leveling the ice mak er ............................................................................. 10

Reversing the door swing ..................................................................10 - 11

Water supply ......................................................................................11 - 12

Drain ........................................................................................................ 12

Installation types ...................................................................................... 13

OPERATION .............................................................................................. 14 - 17

Final check list before operation .............................................................. 14

Operating method ............................................................................. 14 - 15

How the machine makes ice .................................................................... 15

How the machine uses the water ...................................................... 15 - 16

Normal sounds ........................................................................................ 16

Preparing the ice maker for long storage .......................................... 16 - 17

CLEANING AND MAINTENANCE ............................................................. 17 - 22

Exterior cleaning ...................................................................................... 18

Interior cleaning ................................................................................ 18 - 19

Condenser cleaning ................................................................................. 19

Water distribution tube cleaning ........................................................ 19 - 20

Ice-making system cleaning ............................................................. 20 - 21

Control Panel .................................................................................... 21 - 22

Ice Size Adjustment Guide ........................................................................ 22

MAJOR FUNCTIONS ....................................................................................... 23

TROUBLESHOOTING .............................................................................. 23 – 24

LIMITED WARRANTY ........................................................................................ 25

ICE MAKER SAFETY

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can injure or kill you and others. All safety messages will follow the Safety Alert Symbol and either the words "DANGER", "WARNING" OR "CAUTION".

DANGER means that failure to heed this safety statement may result in severe personal injury or death.

WARNING means that failure to heed this safety statement may result in extensive product damage, serious personal injury or death.

CAUTION means that failure to heed this safety statement may result in minor or moderate personal injury, or property or equipment damage.

All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

WARNING: To reduce the risk of fire, electric shock or injury when using your ice maker, follows these basic precautions:

· Plug into grounded 3-prong outlet. · Disconnect power before cleaning.

Do not remove grounding prong. · Disconnect power before servicing.

Do not use an adapter. · Replace all panels before operating.

Do not use an extension cord. · Use two or more people to move & install ice maker.

IMPORTANT SAFEGUARDS

Before the ice maker is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. We strongly recommend that you have a professional install your new

machine. The warranty may be affected or voided by an incorrect installation. To reduce the risk of fire, electrical shock or injury when using the ice maker, follow basic precautions, including the following:

• Plug into a grounded 3-prong outlet; do not remove grounding prong, do not use

an adapter, and do not use an extension cord.

• It is recommended that a separate circuit, serving only your ice maker, be

provided. Use receptacles that cannot be turned off by a switch or pull chain.

• Do not connect or disconnect the electric plug when your hands are wet.

• Never unplug the i c e maker by pulling on the power cord. Always grip the plug

firmly and pull straight out from the outlet.

• Never clean ice mak er par t s w ith fla mmabl e fl uids. Do not stor e or us e gasol ine or

other flammable vapors and liquids in the vicinity of this or any other appliances. The fumes can create a fire hazard or explosion.

• Before proceeding with cleaning and maintenance operations, make sure the

power line of the unit is disconnected and the water line is shut off.

• Before operating, pull all panels back into place.

• Never allow children to operate, play with or crawl inside the ice maker.

• Do not touch the evaporator with your hand when the machine is operating.

• Unplug the ice maker or disconnect power before cleaning or servicing. Failure to

do so can result in electrical shock or death.

• Do not attempt to repair or replace any part of your ice maker unless it is

specifically recommended in this manual. All other servicing should be referred to a qualified technician.

• Use two or more people to move and install the ice maker. Failure to do so can

result in back or other injuries.

• Never install or operate the unit in an enclosed area, such as a closed cabinet. To

ensure proper ventilation for your ice maker, the front of the unit mus t be completely unobstructed. Choose a well-ventilated area with temperatur es above 50°F (10°C) and below 100°F (38°C). This unit MUST be installed in an area protected from the elements, such as wind, rain, water spray or drips.

• The ice maker is designed to be installed in an outdoor kitchen, but must not be

placed directly adjacent to a grill or other source of high heat. A minimum clearance of 6" from all sources o f high hea t mus t be m aintained at all times.

• The ice maker must be installed with all electrical and water connections in

accordance with state and local codes. A standard electrical supply (115 V AC,

60 Hz, 15 A), properly grounded in accordance with the National Electr i cal Code and local codes and ordinances, is required.

• Do not kink or pinch the power supply cord between the ice maker and cabinet.

• The fuse (or circuit breaker ) si ze should be 15 amperes.

• It is important for the ice maker to be leveled in order to work properly. Otherwise

water may not flow properly throug h the evaporator (ice mold) . The ice productio n will be less than normal. You may need to make several adjustments to level it.

• All installations must be in accordance with local plumbing code requirements.

• Make certain that hoses are not pinched, kinked or damaged during installation.

• Check for leaks after water line is connected.

• Although the unit has been tested and cleaned at the factory, due to long-term

transit and storage, the first 3 batches of cubes must be discarded.

• Remove the packing m ater i al s a nd cle an t he ice maker befor e using.

• Turn on the water supply tap before switching on the i c e mak er. Never turn the

water supply tap off when the ice maker is working.

• Except to take ice from the unit, keep the door closed in order to reduce ice

melting and to promote proper ice formation.

• If the ice maker will not be used for a long time, before the next use it must be

thoroughly cleaned. Follow carefully any instruct ions pr ov i ded for cleani ng or use of sanitizing solution. Do not leave any solution inside the ice maker after cleaning.

• Do not touch the condenser fins. They are sharp and can be easily damaged.

• DO NOT use solvent-based cleaning agents or abrasives on the interior. These

cleaners may transmit taste to the ice cubes, or damage or discolor the interior.

• The ice machine cleaner contains acids. Do not use or mix with any other

solvent-based cleaning products. Use rubber gloves to protect hands. Carefully read the safety instructions on the container of the ice machine cleaner.

• Do not use the apparatus other than for its intended purpose.

SAVE THESE INSTRUCTIONS

Electrical Connection

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded. The power cord of this appliance is equipped with a 3-prong grounding plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility of electric shock hazard from the appliance. Have the wall outlet and circuit checked by a qualified electr i ci an t o make sure the outlet i s pr operly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The ice maker should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. Never unplug your ice maker by pul l ing on the power cord. Always grip the plug firmly and pull straight out from the outlet. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage

along its length or at either end. When moving the ice maker, be careful not to damage the power cord.

Extension Cord

Because of potential sa fety haz ar ds under cer t ain co nditions , i t is required that you do not use an extension cord with this ice maker.

TECHNICAL INFORMATION

Model: BLZ-ICEMKR-50GR Electrical power: 115VAC ~ 60Hz

Power consumption: 12.2 kWh/100 lbs of ice

Ice-making /-harvest rated current: 3.0A/3.6A

Refrigerant: R134a, 3.88 oz High/Low side pr essure: 350 psig/130 psig Width x depth x height: 14⅝’’ x 23⅝” x 33” Unit weight: 84 lbs Maximum ice storage: 25 lbs Ice-making capacity: 50 lbs/day* Ice shape: Cube

Ice cube dimensions: 3/4″ x 3/4″ x 1″

The technical data and performance index listed above should be used for reference only. They are subject to change.

*The actual quantity of ice produced per day can vary with environment and water conditions.

COMPONENT LOCATIONS

Water dis tr i buti o n tube

Evaporator (ice mold)

Water trough

Float

Ice storage bin

Control panel

Front louver panel

Door

Caster

Ice scoop

Water supply hose

Power cord

Water inlet

Drain outlet

Drain hose

ICE MAKER INSTALLATION

Excessive Weight Hazard

Use two or more people to move and install ice

injury.

SIDE VIEW

TOP VIE W

Top of unit

Rear of unit

Front of unit

Side Side

4”

1”

Unpacking

Remove p ackag ing mat er ial s. IMPORTANT: Do not remove any permanent instruction labels or the data label on your ice maker.

Remove tape and glue from your ice maker before using.

• To remove any remaining tape or glue. Tape or glue residue can also be easily

removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water in the direction of stainless steel grain.

• Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive

cleaners to remove tape or glue. These products can damage the surface of

maker. Failure to do so can result in back or other

your ice maker.

Cleaning before use

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the "Interior cleaning" in the Cleaning and Maintenance section.

Location requirements

INSTALLATION CLEARANCES:

+ 18 hidden pages