Blaupunkt TRAVEL PILOT 700 DVB-T EUROPE SCW, TRAVELPILOT 700 User Manual
Mobile Navigation
TravelPilot 700
www.blaupunkt.com
Operating and installation instructions
(Long version)
2
Device overview
Device overview
4
2
3
1516171819 14
1
6
7
5
1110 12
9
13
8
Device overview
3
1 Display (touchscreen):
Simple and intuitive operation by touching
the buttons on the display.
2 VOL -:
Decreases the volume
3 On/Off switch:
Long press (for longer than 1 second):
Switches the device on
Long press (for longer than 3 seconds):
Switches the device off
Short press: Calls up the main menu
4 VOL +:
Increases the volume
5 Socket for additional external TMC antenna
(internal TMC antenna is present)
6 Memory card slot
7 Socket for power supply (battery charger or
charger cable for the cigarette lighter)
8 Stylus for operation on the display
9 Digital camera, among other things for recog-
nising signs
: Light sensor for automatic display brightness
(top side)
; Socket for additional external GPS antenna
(internal GPS antenna is present)
< Battery compartment cover
= DVB-T antenna (extendable)
> Socket for additional external DVB-T antenna
? Microphone for speech input and hands-free
system (Bluetooth)
@ Socket for headphones
A Serial port for connecting to the vehicle elec-
tronics (Smart Cable) or sound docking station
(Contact your Blaupunkt specialised dealer or
read the information via the Blaupunkt Internet pages at www.blaupunkt.com)
B USB port for data transfer
C AV-IN/OUT socket for back-up camera and
other audio/video devices
•
•
•
4
Contents
Device overview ..................................2
Safety notes ........................................8
Warning symbols used ...........................8
Use as directed .....................................8
Road safety ..........................................8
General safety notes ..............................8
Notes about handling the CD/DVD ...........9
Cleaning notes ......................................9
Disposal notes ......................................9
Initial startup ......................................9
Scope of delivery ..................................9
Removing protective fi lms .......................9
Charging the battery ..............................9
Switching on the device........................10
Setting the language ............................10
Selecting a dataset ..............................10
Installation in the vehicle ...................10
Installation example .............................11
Attaching the suction cup holder ...........11
Attaching the mounting cup ..................11
Inserting the device in the mounting cup ..11
Removing the device ............................11
Removing the suction cup holder ...........11
Audio playback via the loudspeakers
in the vehicle (AUDIO-MIX function) ....11
Switching on/off ................................12
Switch-on ..........................................12
Switching off ......................................12
Reset .................................................12
Operating the menus .........................12
Main menu .........................................12
Buttons ..............................................13
Keyboard ...........................................13
Intelligent auto-completion function ....13
Buttons overview .............................13
Error-tolerant entry ..........................13
Lists ..................................................13
Information about GPS .......................13
GPS mode of operation ........................13
Displaying GPS info .............................14
Performing basic settings ..................14
Setting the time zone ...........................14
Entering the home address ...................15
Activating the PIN query .......................15
Confi guring the PIN query ..................15
Locking/unlocking the device .............15
Changing the PIN .............................15
Navigation ........................................16
Destination input ...............................16
Entering a country ...............................16
Entering an address ............................16
Entering coordinates ...........................17
Using the home address as destination ...17
Copying a destination from the map ......17
Speech input .....................................18
Points of interest (POI) ......................18
Special POIs .......................................18
My POIs ..........................................18
Supraregional POIs ...........................19
Starting the POI entry ..........................19
Selecting a POI position .......................19
Selecting a POI....................................19
Calling a POI .......................................19
Tour planning ....................................20
Starting the tour planning .....................20
Loading the tour from the memory card ..20
Entering the tour .................................20
Editing a tour ......................................20
Start for this point fi rst .........................21
Calculate to this point fi rst ....................21
Exiting the tour planning .......................21
Using a destination from the
destination/tour memory ...................21
Additional functions after the
destination input/tour planning ..........22
Country info ......................................22
Contents
5
Simulation.........................................23
Starting the simulation .........................23
Simulation settings ..............................23
Storing the position ...........................23
Destination/tour memory ...................24
Saving destinations .............................24
Saving a destination or tour ...............24
Saving the last destination or tour .......24
Editing destinations .............................24
Delete all destinations ..........................25
Backing up destinations (backup copy) ..25
Exporting destinations ......................25
Importing destinations ......................25
Calculating a route .............................25
Starting the route calculation ................25
Specifying route options ....................26
Route guidance..................................27
Start route guidance ............................27
Destination input during route guidance..27
Reaching the place of destination ..........27
Quitting the route guidance ...................27
Disturbed GPS reception ......................27
Offroad route guidance (geocaching) ..28
Working with the map ........................28
Display map .......................................28
Moving and scaling the map ..................28
Touching the map ................................28
Buttons and symbols ...........................29
Map/navigation settings .......................29
Displaying the arrival/remaining driving
time ...............................................29
Switching auto zoom on/off ...............29
Selecting a dataset ...........................29
Selecting units .................................30
Showing/hiding speed and altitude .....30
Aligning the camera ..........................30
Selecting the map/video display .........30
Showing/hiding points of interest at
motorways ......................................30
Showing/hiding destinations on the
map and activating/deactivating POI
notes ..............................................30
Voice instructions.............................31
Speech input ...................................31
Day/night view .................................31
Speed limit......................................31
Continuing a tour automatically ..........32
Showing/hiding tour info ...................32
Map display during route guidance......32
Navigation tools ..................................32
Route information ...............................33
POI note .............................................33
Speed limit (signpost recognition) .........33
Video display during route guidance
(True Navigation) ...............................33
Voice output during route guidance.....34
Additional functions during route
guidance ...........................................34
Display information about the destination ..34
Cancelling route guidance .....................34
Skipping the next destination ................34
Displaying the route list and entering
blockings ...........................................34
Showing/hiding route segments .........34
Blocking route segments ...................35
Unblocking ......................................35
Calculating an alternate route ................35
Entering a blocking ..............................35
Entering a blocking ...........................35
Unblocking ......................................35
TMC function .....................................36
Establishing TMC reception ..................36
Traffi c obstructions on the map display ...36
Showing traffi c reports ........................36
Switch on automatic traffi c jam detours ..36
TMC settings ......................................36
6
Contents
Infotainment .....................................37
Bluetooth function (telephone) ...........37
Starting the Bluetooth application ..........37
Hands-free function .............................38
Calling ............................................38
Answering or rejecting a call ..............38
Ending a call and additional functions ..38
Managing the call list ........................38
Phone book ........................................39
Loading the phone book ....................39
Calling from the phone book ..............39
Adding an entry ...............................39
Editing entries .................................39
Short messages (SMS).........................39
Writing SMS ....................................39
Inbox/outbox ...................................39
Audio transmission ..............................40
File transfer ........................................40
Uploading/downloading data .............40
Establishing a Bluetooth connection .......40
Registering with the cell phone ...........41
Registering with the navigation device ..41
Establishing and disconnecting
Bluetooth connection........................41
Registering additional cell phones
with the navigation device .................41
Performing Bluetooth settings ...............42
Activating/deactivating the
Bluetooth function ............................42
Switching visibility on/off ..................42
Paired devices .................................42
Ringtone .........................................42
Establishing the connection
automatically ...................................43
Changing the PIN .............................43
RAS settings ....................................43
Automatic call answering ...................43
Illustrated phrase book ......................44
Camera function ...............................44
Taking pictures (geotagging) .................44
Filming ..............................................45
Entertainment ..................................45
Inserting and removing the memory card ..45
Starting Entertainment ........................45
Playing music fi les ..............................46
Equaliser ........................................46
Random playback (Mix) .....................46
Repeated playback (Repeat) ..............46
Displaying ID3 tags ...........................46
Calling the music list (Browse) ...........47
Showing image fi les ............................47
Slide show ......................................47
Displaying path of fi le name ...............47
Rotating an image.............................47
Calling the image list (Browse) ...........48
Playing video fi les ................................48
Connecting the back-up camera or an
external audio/video source ..................48
Using the navigation device as video
source ............................................48
Using the external device as video
source ............................................48
Games ...............................................49
Television (DVB-T) .............................49
Establishing reception .........................49
Starting the DVB-T application ...............49
Searching for stations ..........................50
Selecting a station ...............................50
Creating a favourites list .......................50
Teletext ..............................................51
Electronic programme guide (EPG) ........51
DVB-T settings ....................................51
Audio .............................................51
Video .............................................52
Subtitle ..........................................52
System ...........................................52
Internet function ...............................53
Confi guring the Internet (WLAN settings) ..53
Connecting to a visible WLAN network ..53
Manually confi guring and connecting
an invisible WLAN network (SSID is
suppressed) ....................................53
Contents
7
Disconnecting from a WLAN network ..54
Web browser ......................................54
The toolbar......................................54
Calling up a web page .......................54
Selecting web pages/addresses from
history ............................................54
Adding and selecting a bookmark .......55
Searching text on the current web page ..55
Basic settings of the web browser .......56
Exit the web browser ........................56
e-mail communication ..........................57
Confi guring e-mail communication ......57
Confi guring and managing e-mail
accounts .........................................57
Settings for sending and receiving ......57
Performing spam settings ..................58
Additional settings ...........................58
Using the e-mail function ...................58
Editing an e-mail ..............................59
Internet telephony (VoIP) .....................59
Confi guring VoIP ..............................59
Using VoIP .......................................60
Internet radio ......................................60
Listening to Internet radio ..................60
Adding stations to favourites and
deleting them from favourites.............60
Saving a new station .........................61
Podcasting .........................................61
Loading podcasts .............................61
Loading and playing episodes ............61
Editing podcasts/episodes ................61
Offi ce function ..................................62
Starting the Offi ce application ...............62
Displaying documents (viewer) .............62
Notes ................................................62
Writing programme (Notepad) ...........62
Drawing programme (Paint) ...............62
Calendar ............................................63
Calculator ..........................................63
Voice recorder ....................................63
Playing recordings ............................63
Editing recordings ............................63
Blocking recordings ..........................64
File manager .......................................64
My fi les .............................................65
My fi les in the internal memory ..............65
Playing or displaying My fi les .................65
Transferring My fi les ............................65
Data transfer with memory card ............65
Loading data onto the memory card ....65
Loading data from the memory card
to the memory .................................65
Data transfer with computer (USB) ........66
Copying data from the navigation
device ............................................66
Copying data to the navigation device..66
Settings ............................................66
Setting the alarm ..............................66
Audio/video ....................................67
Setting My Button in the main menu
(quick access) .................................67
Demo mode ....................................67
Theft protection ...............................67
Display ...........................................67
Product information .........................67
Sound & volume ...............................68
Language ........................................68
Saving energy ..................................68
Button sound ...................................68
Calibrating the touchscreen ...............68
Time...............................................68
Factory settings ...............................68
Wireless connections ........................69
Software ...........................................69
Reinstalling navigation software ............69
Updating the navigation software ...........69
Service .............................................69
Warranty ...........................................69
Technical data ...................................70
Troubleshooting table ........................71
8
Safety notes
Safety notes
For your personal benefi t, carefully read the following safety notes before operating the device
for the fi rst time.
Warning symbols used
In the chapters, warning symbols refer to important notes for you and the device.
DANGER!
Warns about injuries or life-threatening
danger
DANGER!
Warns about accidents
Use as directed
The device is designed for mobile use in vehicles.
Some functions may not be used by the driver.
Special information about the navigation of trucks,
busses and campers, such as altitude and width
limitations or maximum permissible road load, is
not included in the navigation data!
Navigation off the roads (offroad route guidance)
is not possible with this navigation device.
Road safety
The navigation device does not release
you from your responsibility as a driver
for correct and prudent behaviour in traffi c. Always observe the applicable traffi c
rules.
Use your device in such a way that you
can always safely control your vehicle. If
in doubt, stop and operate the device
while the vehicle is standing. If you are
the driver, you may not use the applications that distract you from the traffi c
around you (depending on the scope of
functions of the device, e.g. watching TV,
videos).
General safety notes
Observe the following notes to protect the device
against defects and yourself against injuries and
life-threatening dangers from an ignition or explosion:
Protect the device against moisture since it
is not waterproof and not splashproof.
Do not modify or open the device. Otherwise, it could be damaged and then ignite or
explode. Or acidic, fl ammable liquid could
run out of the battery.
Do not expose the device to very low (below
-20 °C) and very high temperatures (above
60 °C), e.g. close to fi re, heating devices or in
a parked car with direct exposure to the sun.
Moisture could form inside the device or the
device could overheat. The device or battery
could deform and even ignite or explode. Or
acidic, fl ammable liquid could run out of the
battery.
If battery liquid comes into contact with
your eyes or skin, immediately fl ush with water and consult a doctor.
Always ensure a safe installation in the vehicle. If the bracket is not correctly affi xed,
the device may turn into a safety risk for the
vehicle occupants during heavy braking or in
case of an impact.
Remove the device from the power supply
when you park your vehicle since it contin-
ues to use battery power and could deplete
the vehicle battery. Do not unplug the connector of the power supply by pulling on the
wire. The wire could be damaged and cause
electrical shock.
•
•
•
•
•
•
Safety notes | Initial startup
9
Notes about handling the CD/DVD
The device is supplied with a CD/DVD that contains navigation software and map material. To
protect the CD/DVD against dirt and damage, observe the following notes:
Store the CD/DVD in its case. Hold the
CD/DVD only at the edge.
Do not expose the CD/DVD and the case
to direct sunlight.
Use only a clean CD/DVD. If necessary,
clean the CD/DVD with a soft, lint-free
cloth from inside to outside.
Never clean the CD/DVD in a circular
motion.
Do not use any solvents, including on the
printed side of the CD/DVD.
Cleaning notes
Clean the display with a dry, soft cloth.
Water and other liquids could damage the
display.
Do not use strong detergents for cleaning
the housing. Use only a moistened, lint-
free cloth.
Disposal notes
Use the return and collection systems available to dispose of the old device.
Do not discard any batteries in the household trash; instead, return them to the
corresponding collection sites.
Initial startup
Scope of delivery
The scope of delivery contains the following components:
Navigation device
Suction cup bracket
Battery charger
Charger cable for cigarette lighter
TMC antenna
USB cable incl. USB adapter
Video cable
Headset (headphones with microphone)
Operating instructions (Short version)
Backup DVD
Note:
We recommend the use of original Blaupunkt
accessories (www.blaupunkt.com).
Removing protective fi lms
Prior to the fi rst use, carefully remove all protective fi lms from display, housing and camera.
Charging the battery
Upon purchasing the navigation device, the battery could be discharged. Please charge the battery before using the device.
DANGER!
The use of unapproved chargers and batteries may lead to
an ignition or explosion of the
device
Use only the original chargers and batteries
from Blaupunkt for operating and charging to
correctly charge the battery and protect it against
overvoltage.
•
•
•
•
•
•
•
•
•
•
10
Initial startup | Installation in the vehicle
The charging process in the switched-off state is
approx. 3 hours. The charge state indicator is located on the top display bar.
The device is supplied by an external
power source.
The device is supplied by its internal
battery. The charge state of the battery is suffi cient.
The device is supplied by its internal
battery. The charge state of the battery is low.
If the charge state of the battery becomes weak,
the navigation device warns you about it.
Connect the battery charger or the charger
cable for the cigarette lighter to the charging
socket.
Note:
The battery is equipped with a protection
against overheating from excessive current
fl ow. The protection prevents charging the
battery starting at an ambient temperature
above 45 °C.
Switching on the device
A
Press and hold the On/Off switch for longer
than 1 second.
•
•
•
W
W
Setting the language
The device uses English as standard language. If
you switch on the device for the fi rst time, a dialogue menu is displayed in which you can select
another language for the menus and voice outputs
as well as for the speech input.
Select your preferred language in the dialogue menu.
Please follow the instructions.
The language is loaded and the main menu is
displayed.
Selecting a dataset
After the initial start of the navigation, you must
select a road map. The message "Data record not
available" is automatically displayed.
Touch the OK button.
A list of the available road maps is displayed.
Touch the desired road map in the list to se-
lect it.
Installation in the vehicle
For temporary installation in a vehicle, the navigation device features a holder to attach it to
the windshield.
DANGER!
The installation at an unsuitable location can cause injuries
Install the navigation device so that it does not
block your view and does not distract from the
traffi c.
Do not install the device in the airbag deployment
area.
Ensure that the device does not pose a threat to
passengers in the vehicle in case of emergency
braking.
Check the fi rm installation of the bracket at regular
intervals. The bracket can loosen due to changes
in the ambient temperature.
W
W
W
W
Installation in the vehicle | Audio playback via the loudspeakers
11
Installation example
The fi gure shows only an installation suggestion.
For the installation in the vehicle, you should observe the listed safety notes in any case.
ca. 15 cm
Attaching the suction cup holder
Locate a suitable place inside the vehicle for
the installation.
To ensure a perfect hold, the glass must be
free of dust and oil. If necessary, clean the
glass using a lens cleaning tissue.
Press the suction cup of the holder against
the windshield.
Push the lever on the support towards the
glass.
Attaching the mounting cup
The suction cup holder features two mounts for
the mounting cup.
Push the mounting cup onto the mount until
it engages.
W
W
W
W
Inserting the device in the mounting
cup
The device features two cut-outs on the underside
for the mounting cup.
Place the device onto mounting cup with the
underside fi rst and push it to the back.
The clamping holder of the mounting cup
must engage in the top side of the housing
with a click.
Align the bracket.
Removing the device
Push the clamping holder down.
The device disengages from the bracket.
Remove the device.
Removing the suction cup holder
If you change vehicles, you can simply remove the
support.
Push the lever on the support away from the
glass.
Carefully loosen the suction cup at the edge
from the glass so that air can enter between
suction cup and glass.
Carefully pull the suction cup off of the glass.
Audio playback via the
loudspeakers in the vehicle
(AUDIO-MIX function)
The navigation device can be used as an external
audio source if it is connected to a car sound system. The voice output of the navigation and music
tracks is then played back via the loudspeakers in
the vehicle.
If the car sound system features the AUDIO-MIX
function, the sound of the navigation device and
the car sound system can be mixed. That is, the
voice output of the navigation is switched through
while you are listening to the radio or a CD.
W
W
W
W
W
W
W
12
Audio playback via the loudspeakers | Switching on/off | Operating the menus
Prerequisite:
Compatible Blaupunkt car sound system with
rear or front AUX-IN socket
Car sound system supports the AUDIO-MIX
function (contact your Blaupunkt specialised
dealer)
Connect the car sound system with the navigation device by means of a cable – according
to the instructions of the car sound system.
On the car sound system, activate the
AUDIO-MIX function by switching on the AUXIN socket.
The voice output of the navigation and audio
source of the car sound system are mixed.
- or On the car sound system, deactivate the
AUDIO-MIX function by switching off the AUXIN socket.
The navigation device is used as external
audio source.
•
•
W
W
W
Switching on/off
The On/Off switch is used to switch the device on
and off and to open the main menu.
Switch-on
Press and hold the On/Off switch for longer
than 1 second.
Switching off
Press and hold the On/Off switch for longer
than 3 seconds.
The device is fi rst placed in idle state and
remains ready for operation. All functions will
be completely switched off after 2 hours.
Note:
The device continues to use a small amount of
energy even if it is switched off. If you use the
device again after an extended period of time,
it may be necessary to recharge the battery.
Reset
If the device does not work properly, a simple
reset may help.
Press and hold the On/Off switch for longer
than 14 seconds.
The device is switched off and restarted.
Operating the menus
Main menu
From the main menu, you can access the applications, e.g. the navigation, and the settings.
Briefl y press the On/Off switch to reach the
main menu from any other menu.
W
W
W
W
Operating the menus | Information about GPS
13
The main menu offers quick access that can
be modifi ed. Replace one of the symbols of
your preferred application (ch. "Settings").
Buttons
Touch this button to return to the
previous menu.
Touch this button to change to the
next page in the menu.
Options:
Touch this button to obtain access to additional
functions.
Info:
Touch this button to display detailed information.
OK:
Touch this button to confi rm an entry or a setting.
Keyboard
If text entries are required (e.g. for the destination
input), a virtual keyboard appears on the display.
You can perform all entries using your fi nger. Only
capital letters can be entered.
Intelligent auto-completion function
During destination input, the device auto-completes characters as far as possible and offers
only those characters on the keyboard that are
logically possible.
Buttons overview
Delete last character
Entering blank spaces
Call up alternate character keyboard (incl.
special characters, umlauts)
Call up numeric keypad, e.g. to enter the
house number
Call up character keyboard
Call up error-tolerant entry
Error-tolerant entry
The error-tolerant entry helps if you do not know
the exact spelling of a city. After your entry, a list
with city names spelled in a similar way appears.
Touch the symbol in the text entry.
The error-tolerant entry is displayed.
Enter a city name and touch OK.
A list with alternate city names is displayed.
Lists
You can frequently display lists form which you can
select an entry (e.g. a destination). For example, if
you do not enter the complete name of a location,
a list with possible results is displayed.
Touch the button to display the
list.
The number of entries is displayed next to the symbol.
Touch one of the buttons to
scroll through the list.
Touch an entry to select it.
Touch the OK button to accept the entry or to
confi rm it.
Touch the Info button to display abbreviated
entries in their entirety.
Information about GPS
The GPS (Global Positioning System) allows
world-wide navigation and locating via satellites
to determine a position.
GPS mode of operation
The navigation device measures the current position of your vehicle via GPS and compares these
coordinates with its map material. The map material contains the geographic coordinates of points
of interest, streets and cities that you can view on
the display of the navigation device. The device
uses this information to calculate the route to the
destination you entered.
W
W
W
W
W
W
W
14
Information about GPS | Performing basic settings
Displaying GPS info
Information about the GPS reception of the device, your current position and your speed can
be found in the GPS Info menu.
Touch the symbol in the main
menu.
The map is displayed.
Touch the symbol.
The Navigation menu is displayed.
Touch the button.
The display shows the second
page of the menu.
Touch the symbol.
The GPS Info menu is displayed.
This menu contains this information:
Latitude/Longitude: Current position in
longitude and latitude
Altitude: Current height above mean sea
level (approximate value)
Speed: Indicates the current speed of the
vehicle
Heading: Driving direction (reliable information after approx. 5 km/h)
Satellites: Number of GPS satellites received. The navigation requires signals
from at least 3 satellites.
GPS Signal Quality: Signal strength of
the GPS satellites received.
Note:
External infl uences can interfere with the view
to the sky and, therefore, the GPS reception
of the navigation device.
W
W
W
W
–
–
–
–
–
–
Performing basic settings
Before starting a route guidance, perform these
basic settings:
Set the time zone of your position so that the
correct arrival times are displayed during the
navigation.
You should enter your home address to quickly navigate home from any location.
Activate the PIN query if you want to lock out
unauthorised persons from using the device.
Setting the time zone
Touch the symbol in the main
menu.
The Settings menu is displayed.
Touch the symbol.
The Time menu is displayed.
Touch the symbol.
A list with available time zones is
displayed.
Touch the time zone in the list that applies to
your location.
Note:
The selection is facilitated by the display
of the capitols in the respective time zone.
"GMT" stands for Greenwich Mean Time, the
mean solar time at the Greenwich meridian
without considering daylight savings time.
Touch the OK button.
Touch the symbol to switch between
24-hour display (check mark) and
12-hour display (no check mark).
Touch the symbol to activate (check
mark) or deactivate (no check mark)
daylight savings time.
•
•
•
W
W
W
W
W
W
W
Performing basic settings
15
Note:
If the time is changed at your position or if
you drive into a different time zone, you must
adjust the settings.
Touch the button to exit the
menu again.
Entering the home address
Touch the symbol in the main
menu.
The map is displayed.
Touch the symbol.
The Navigation menu is displayed.
Touch the symbol.
The Destination Input menu is dis-
played.
Touch the symbol.
The Destination Input For Home
Address menu is displayed.
Touch the symbol to enter a new ad-
dress as described in the chapter
"Destination input", "Entering an
address".
Note:
The confi gured home address can be viewed
at any time in the Destination Input For Home
Address menu and changed, if necessary
(Change button).
Activating the PIN query
The PIN query allows you to lock out unauthorised
persons from using the device. Hence, every time
you switch on the device, the PIN (Personal Identifi cation Number) you confi gured for yourself is requested. The PIN can be changed at any time. If you
should forget the PIN, you can unblock the device
again with the PUK (Personal Unblocking Key) which
you defi ne yourself. The PUK cannot be changed.
To secure your PUK:
Register on the Blaupunkt Internet page and follow the instructions: http://puk.blaupunkt.com
Note:
During the PIN entry, you have only 3 attempts
to enter the correct PIN or subsequently 3 at-
W
W
W
W
W
W
W
tempts to enter the correct PUK. If you enter
an incorrect PUK for the 3rd time, your device
is permanently blocked and the device must
be returned to the Blaupunkt service.
Confi guring the PIN query
Touch the symbol in the main
menu.
The Settings menu is displayed.
Touch the button to scroll
through this menu.
Touch the symbol.
The Anti-Theft Protection menu is
displayed.
Touch the Anti-theft Protection button.
Touch the OK button.
The PIN query is displayed.
Follow the instructions and enter a self-se-
lected PIN.
Touch the OK button.
The initial confi guration of the PIN is followed by a
request to enter a PUK. The PUK is used to unlock
the device if you should forget the PIN.
Follow the instructions and enter a self-selected PUK.
Touch the OK button.
Locking/unlocking the device
Prerequisite:
You confi gured the PIN query.
In the Anti Theft Protection menu, touch the
Anti-Theft Protection button to lock the device
(check mark) or to unlock it (no check mark).
The PIN query is displayed.
Enter your PIN.
Touch the OK button.
Changing the PIN
In the Anti Theft Protection menu, touch the
Change PIN Code button.
The PIN query is displayed.
Follow the instructions and enter a new self-
selected PIN.
Touch the OK button.
W
W
W
W
W
W
W
W
W
•
W
W
W
W
W
W
16
Navigation | Destination input
Navigation
The navigation device does not release you from
your responsibility as a driver for correct and prudent behaviour in traffi c.
DANGER!
Distraction from the traffi c can cause
accidents
Do not operate the device while driving.
View the display only during safe traffi c situa-
tions.
Notes:
Routes are best planned before starting
your trip.
Perform the basic settings fi rst.
Touch the symbol in the main
menu.
The map is displayed.
From the map, you can directly change to the
navigation menu or to the map/navigation settings.
Destination input
In the destination input, you can enter an address,
select a destination from memory, or select a point
of interest via the keyboard.
Touch the symbol on the map.
The Navigation menu is displayed.
•
•
W
W
In the Navigation menu, touch the
symbol.
The Destination Input menu is displayed.
Note:
You can only select places of destination
(countries, cities, streets, house numbers,
points of interest) that are contained in the
map material.
Entering a country
When you enter the fi rst address, a list is displayed
from which you can select the desired country.
The countries are preinstalled.
The enclosed CD/DVD offers additional road
maps depending on the device variant as well as
an installation program to copy the countries to
your memory card. The road maps are made available in the map/navigation settings (ch. "Working
with the map").
Entering an address
Touch the symbol.
The Destination Input menu is dis-
played.
W
W
Destination input
17
Note:
You do not have to repeat entering the country,
city and street information every time. Only if
your destination is at a different location than
the previous one will you have to re-enter the
destination address.
Touch the symbol to select a different country.
Touch the symbol and enter the city
or postal code.
Touch the symbol and enter the
street.
Touch the symbol and enter the
house number.
- or Touch the symbol and enter the
street that intersects the previously
entered street.
Touch the Start Route Guidance button to
start the route guidance.
Note:
After the destination input, you can start the
route guidance or store the destination. For
further details, read the chapter "Additional
functions after the destination input".
Entering coordinates
Touch the symbol.
The Destination Coordinates menu is
displayed.
Touch the symbol to enter the latitude.
The keyboard is displayed.
Touch the symbol to enter the longitude.
The keyboard is displayed.
The coordinates can be entered in decimal or
DMS format (Degrees, Minutes, Seconds).
W
W
W
W
W
W
W
W
W
Enter the coordinates in decimal format by
touching the number buttons, followed by the
comma buttons.
Enter the coordinates in DMS format by selecting the cardinal point fi rst. To do so, touch
the N/S or E/W button.
Next, enter the coordinates with degrees (°)
and minutes (‘) via the keyboard.
Touch the OK button.
Touch the Start Route Guidance button.
Using the home address as
destination
Touch the symbol in the Navigation
menu.
The route guidance is being started.
Copying a destination from the map
Touch the symbol.
The map is displayed.
Move and scale the map as described in the
chapter "Working with the map".
Touch a location of your choice.
The city is selected and the address or the
coordinates are displayed. It is also possible to display several addresses.
Touch the desired address or the coordinates.
The Position menu is displayed with additional buttons.
Touch the symbol to start the route
guidance.
W
W
W
W
W
W
W
W
W
W
W
18
Speech input | Points of interest (POI)
Speech input
Enter a destination without looking at the display. The speech input is possible for the following languages: German, English, Spanish, Italian,
French, Portuguese and Dutch (Changing the language: ch. "Working with the map", "Map/navigation settings").
In the Navigation or Destination Input menu,
touch the Speech Input button.
- or On the map, touch the symbol on the
bottom display bar.
Note:
The symbol is available only if no route guidance is active. During route guidance it is not
displayed.
The menu for the speech input is displayed
with the possible voice commands. The voice
output of the system asks you for speech input or provides help.
Notes:
Ensure that no noises in your environment
interfere with the speech input, e.g. ventilation or open windows.
The voice output of the system can be cancelled by touching the display.
As soon as the warning beep sounds
and the green light is lit, speak loudly
and clearly.
If your voice command is recognised, it may
be repeated for verifi cation and displayed on
the bottom display bar. The corresponding
submenu is opened or the route guidance is
started.
The following speech inputs for the destination input are possible:
"Start route guidance": Direct start of the
route guidance to the last destination.
"Exit route guidance": Exit the current
route guidance.
"Destination input": Entry of the destination address in several steps (country,
W
W
•
•
W
–
–
–
city, street, house number).
"Navigate to ...": Selection of a destination by giving its name (only for previously named destinations).
"Last destinations"/ "Saved destinations":
Selection of a destination from the last or
saved destinations.
"Additional help": Additional voice commands for saving and naming destinations are displayed, read aloud and
explained.
The following speech inputs are possible in all
speech input menus:
"Help": Voice commands of the current
menu are displayed, read aloud and
explained. Over time, you will become
familiar with the voice commands and
do no longer need any help.
"Cancel": Exit speech input.
Points of interest (POI)
Points of interest (POI) are specifi c locations,
such as parking facilities and petrol stations, that
are stored in the map material. First, determine
the position for the POI (ch. "Selecting the POI
position"). Next, select the desired POI ("Selecting a POI").
You can also select a photo taken with the device
and, therefore, your position while taking the photo, as a point of interest.
Special POIs
My POIs
Besides point-of-interest (POI) categories, such as petrol stations and parking,
the My POIs category is available.
This expands the navigation with individual destinations, e.g. with the addresses of friends or your
favourite restaurant.
The enclosed CD/DVD contains an installation
programme with instructions to create your own
POI lists at computer or to load existing POI lists.
–
–
–
–
–
Points of interest (POI)
19
Supraregional POIs
Supraregional POIs are POIs that cannot be assigned to any city. This can be an airport, a motorway exit or a mountain pass.
Starting the POI entry
Prerequisite:
You are in the Destination Input menu (ch.
"Destination input")
Touch the symbol in the Destination
Input menu.
The Points of Interest menu is dis-
played.
Selecting a POI position
Touch the symbol to enter a city. A
different country can be selected
fi rst.
- or Touch the symbol to select a POI
nearby.
- or -
Touch the symbol to select a POI in
the destination area.
Note:
The destination to which you started
a route guidance last is taken as the
destination area.
- or -
Touch the symbol to select a POI
close to the home address.
- or Touch the symbol to select a loca-
tion on the map (ch. "Destination
input", "Copying a destination from
the map").
- or -
Touch the symbol to select a supraregional POI.
•
W
W
W
W
W
W
W
- or Touch the My Pictures button to select an im-
age and, therefore, the location of the photo
as the destination .
Selecting a POI
Touch one of the symbols to select a point of
interest category.
For some points of interest, you can enter the
name via the keyboard or call up a list in which
you select the desired point of interest.
Touch the Start Route Guidance button.
Note:
After the destination input, you can start the
route guidance or store the destination (ch.
"Additional functions after the destination
input").
Calling a POI
If you selected the POI, the phone number is displayed, if available (e.g. for hospitals, hotels). You
can dial the point of interest before you start the
route guidance.
Prerequisite:
Bluetooth connection to the cell phone (ch.
"Bluetooth function")
After selecting the POI, touch the Options
button to call up the add-on menu.
Touch the symbol.
The message "Outgoing Call" and the
phone number are displayed. The
point of interest is being dialed.
W
W
W
•
W
W
20
Points of interest (POI) | Tour planning
Tour planning
The tour planning is used to enter a tour with a
random starting point and several interim destinations.
Perform the tour planning on the device itself or
create a tour on the computer and upload it to the
device from a memory card.
Starting the tour planning
Prerequisite:
You are in the Destination Input menu (ch.
"Destination input")
Touch the symbol in the Destination
Input menu.
The Tour Planning menu is dis-
played.
Loading the tour from the memory
card
Use tours with up to 10 interim destinations from
the memory card. The enclosed CD/DVD contains
an installation programme with instructions for
the tour planning with the computer.
Insert the memory card in the device as
described in the ch. "Entertainment".
In the Tour Planning menu, touch the Load
Tour from SD button.
The tours on the memory card are listed.
Touch an entry in the list to load the desired
tour.
The Tour Planning menu is displayed. The
interim destinations of the tour are listed.
Note:
If the tour on the memory card has more than
10 destinations, only the fi rst 10 destinations
are loaded and displayed.
•
W
W
W
W
Entering the tour
In the Tour Planning menu, touch the Add
Destination/Tour button.
Enter a destination as described in the chapter "Destination input".
Note:
Previously saved tours can be loaded from
the Destination & Tour Memory and additional
destinations can be added.
Touch the OK button.
Repeat the steps to enter additional destina-
tions.
Note:
You can enter a tour with up to 10 destinations.
Editing a tour
In the Tour Planning menu, touch the destination to be edited.
The destination is displayed with its address
in the tour list.
Note:
For the extended view for long destination addresses, touch the desired destination twice
in the tour list.
Touch the symbol to move the destination up.
Touch the symbol to move the destination down.
Touch the symbol to delete the destination.
Touch the symbol to display the destination on the map.
Touch the button to close the
map view.
W
W
W
W
W
W
W
W
W
W
Tour planning | Using a destination from the destination/tour memory
21
Touch the buttons to select another destination in the tour
list.
The destination can be edited in
the same way.
If you performed changes to the settings:
Touch the button to exit the
menu.
Start for this point fi rst
Start the route guidance from an interim destination, e.g. to continue the tour after a break.
In the Tour Planning menu, touch the destination from which the route guidance should
start.
The destination is displayed with its address
in the tour list.
Touch the Options button to call up the addon menu.
Touch the symbol.
The route is calculated starting with
the current position and the route
guidance starts to the next interim
destination (ch. "Route guidance").
Calculate to this point fi rst
Calculate the route from a specifi c interim destination to learn about distance and driving time:
In the Tour Planning menu, touch the destination from which the route calculation should
start.
The destination is displayed with its address
in the tour list.
Touch the Options button to call up the addon menu.
W
W
W
W
W
W
W
Touch the symbol.
The route is calculated based on the
current position (ch. "Calculating a
route").
Exiting the tour planning
Touch this button to exit the
menu.
Save the tour in My destinations & tours or
delete it.
Using a destination from the
destination/tour memory
The last and preferred destinations or tours are
stored in the destination & tour memory (ch. "Des-
tination/tour memory").
In the Navigation menu, touch the
symbol.
The Destination & Tour Memory
menu is displayed.
Touch the symbol.
The My Destinations & Tours menu is
displayed.
- or Touch the symbol.
The Last Destinations & Tours menu
is displayed.
Touch the desired destination.
Touch the Info button to display the address
of the destination.
Touch the Show in Map button to display the
destination on the map.
Touch the button twice to return
to the destination & tour memory.
Touch the Start Route Guidance button.
W
W
W
W
W
W
W
W
W
W
W
22
Additional functions after the destination input/tour planning | Country info
Additional functions after the
destination input/tour planning
Prerequisite:
Destination input via keyboard or speech input
- or Selection of a point of interest
- or You entered or loaded a tour
Touch the Options button to call up the add-
on menu.
You have now the following options:
Defi ning route options (ch.
"Specifying route options")
Calculating a route (ch.
"Calculating a route")
Saving a destination or
tour (ch. "Destination/
tour memory")
Displaying a destination or tour on the
map (ch. "Working
with the map")
For certain points of interest only
(e.g. hospital, hotel): Dialling a
destination (ch. "Calling a POI")
For tour planning only:
Load tour from memory card (if
you already entered destinations, the tour is being added)
•
•
•
W
–
–
–
–
–
–
Country info
For the country in which you are currently located,
general traffi c rules are provided, e.g. the maximum speed.
During route guidance, the country information
is displayed on the map as soon as you cross a
national border.
DANGER!
Disregarding the local traffi c rules and
street routing can cause accidents
The country information may not be current due to
short-term changes in the law, signposts or similar.
The traffi c rules and local street routing always
have priority over the information of the navigation device.
In the Navigation menu, touch
the button to display the second
page of the menu.
In the Navigation menu, touch the
symbol.
The country info is displayed.
W
W
Simulation | Storing the position
23
Simulation
Start the route simulation to learn the functions
during route guidance.
Starting the simulation
Enter any start position and the destination of the
simulation. If you want to simulate a tour with interim destinations, select a saved tour for the destination (ch. "Tour planning").
Touch the symbol in the Navigation
menu.
The Simulation menu is displayed.
Touch the upper fi eld and enter the start position.
Touch the lower fi eld and enter the destination.
Enter the start position and the destination
for the simulation as it is done in the destination input.
Touch the Start Simulation button to travel
the route.
Simulation settings
You can specify whether the route should be travelled once or endlessly during the simulation.
Touch the Options button to call up the addon menu.
Touch the symbol to change between
single and endless simulation.
The endless loop
in the symbol
indicates that the endless simulation
is activated.
W
W
W
W
W
W
Storing the position
Store your current position as destination and
start a route guidance to it at a later time.
In the Navigation menu, touch
the button to display the second
page of the menu.
Touch the symbol.
The Position Information menu is
displayed.
This menu contains this information:
Latitude/Longitude: Current position in
longitude and latitude
Altitude: Current height above mean sea
level
The address of the current location, if it is
contained in the map material
The compass: Direction North (reliable
information after approx. 5 km/h)
Touch the Save As Destination button.
The keyboard is displayed.
Enter a name for the destination and confi rm
with OK.
The destination is stored under the name en-
tered in the My Destinations & Tours menu.
W
W
–
–
–
–
W
W
24
Destination/tour memory
Destination/tour memory
Two lists are available in which destinations or
tours are saved:
My Destinations & Tours:
Frequent destinations or tours can be stored
permanently in the My Destinations & Tours
menu (max. approx. 100). The destination
receives a name of your choice.
Last Destinations & Tours:
The last 20 destinations and tours, for which a
route was calculated or a route guidance was
started (ch. "Calculating a route" or "Route
guidance"), are listed in the Last Destinations
menu.
Saving destinations
Permanently store a destination or tour after its entry or from the memory in My Destinations & Tours.
Saving a destination or tour
Prerequisite:
You entered a destination as described in the
chapter "Destination input".
- or You entered a point of interest as described in
the chapter "Points of interest".
- or You planned a tour as described in the chap-
ter "Tour planning".
Touch the Options button to call up the add-
on menu.
Touch the symbol.
The keyboard is displayed.
Enter a name for the destination and touch
OK.
The destination is stored under the name entered in the My Destinations & Tours menu.
Saving the last destination or tour
In the Navigation menu, touch the
symbol.
The Destination & Tour Memory
menu is displayed.
•
•
•
•
•
W
W
W
W
Touch the symbol.
The Administrate menu is displayed.
Touch the symbol to edit the last destinations.
Select the destination to be saved in the Last
destinations list.
Touch the symbol.
The keyboard is displayed.
Enter a name for the destination and touch
OK.
The destination is stored under the name entered in the My Destinations & Tours menu.
Editing destinations
Saved destinations can be renamed, the order can
be changed or deleted. Last destinations can be
deleted.
Touch the symbol in the Navigation
menu.
The Destination Memory menu is
displayed.
Touch the symbol.
The Administrate menu is displayed.
Touch the symbol to edit the last destinations and tours.
- or Touch the symbol to edit the stored
destinations and tours.
In both cases, the list with destina-
tions and tours is displayed.
Touch the destination in the list to edit it.
Touch one of the symbols to
move the destination up or
down.
Touch the symbol to delete the destination.
Touch the symbol to rename the destination.
The keyboard is displayed.
Enter a new name for the destination and
touch OK.
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Destination/tour memory | Calculating a route
25
The destination is stored under the name entered in the My Destinations & Tours menu.
Delete all destinations
You can delete all the last destinations or all stored
destinations:
In the Navigation menu, touch the
symbol.
The Destination & Tour Memory
menu is displayed.
Touch the symbol.
The Administrate menu is displayed.
Touch the symbol to delete all the last
destinations.
- or Touch the symbol to delete all stored
destinations.
A confi rmation is displayed.
Touch Yes to delete the destinations.
- or -
Touch No to cancel the procedure.
Backing up destinations
(backup copy)
To back up the saved destinations (My Destinations & Tours) and the home address, back the
destinations up to a memory card.
Insert the memory card in the device as described in the chapter "Entertainment".
In the Navigation menu, touch the
symbol.
The Destination & Tour Memory
menu is displayed.
Touch the symbol.
The Administrate menu is displayed.
Exporting destinations
Touch the symbol.
The destinations and home address
are copied to the memory card.
W
W
W
W
W
W
W
W
W
W
Importing destinations
Touch the symbol.
The Import from SD menu is dis-
played.
The destinations in the device are not overwritten. My destinations & tours are added,
the same names may occur multiple times.
The home address is loaded only if none
exists in the device.
Calculating a route
Calculate the route to a destination entered to
learn about distance and driving time: Afterwards, you have the option of starting the route
guidance or further optimising the route options
(ch. "Specifying route options").
All destinations, for which a route is calculated,
are stored in the Last Destinations & Tours.
Starting the route calculation
Conveniently plan your vacation trip at home and
gain an overview of the route and driving time –
even without GPS reception.
Prerequisite:
You entered a destination as described in the
chapter "Destination input".
- or You entered a point of interest as described
in the chapter "Points of interest".
- or You planned a tour as described in the chap-
ter "Tour planning".
Touch the Options button to call up the add-
on menu.
Touch the symbol.
The route is being calculated.
- or For tours, touch the symbol.
The Set Tour Start Point menu is dis-
played.
Select the current position as starting point
or enter an address.
W
•
•
•
W
W
W
W
26
Calculating a route | Specifying route options
The destination with information about time
and distance is displayed. The interim destinations are displayed for tours.
Note:
If no GPS reception is available, the last
known position is taken as the starting point
of the route.
Touch a destination to display more information about time and distance.
Touch this button to exit the
menu.
Touch the Info button to display the route on
the map next or to calculate alternative routes
by distance and driving time (calculating an
alternate route, ch. "Additional functions during route guidance").
Touch the Start Route Guidance button to
start the route guidance.
Specifying route options
The route options can be defi ned at any time. If
you change the route options during a route guidance, the route may be recalculated.
Touch the symbol in the map view.
The Navigation menu is displayed.
Touch the symbol.
The Route Options menu is dis-
played.
Touch the symbol to select the type
of route calculation:
My Optimum: Combination of shortest and fastest Route at a ratio of 40 to
60 percent. Distance and time are taken
into consideration. The ratio from short
to fast is adjustable (Options button).
Fast: The route with the fastest driving
time is calculated.
Short: The route with the shortest distance is calculated.
Ecological: The route with the lowest
possible driving expenses (fuel effi cient)
is calculated. For this purpose, the shortest and fastest route are combined at a
W
W
W
W
W
W
W
–
–
–
–
ratio of 75 to 25 percent.
Economic: Combination of fastest and
ecological route. Time and costs are taken
into consideration. For this purpose, the
shortest and fastest route are combined
at a ratio of 40 to 60 percent.
Offroad: Distance and time for the
straight line between position and destination are calculated (ch. "Offroad route
guidance (geocaching)").
Touch the symbol to change between speed profi les offered.
To calculate a driving time that is as
precise as possible, select one of
the 2 user profi les:
Change: Personal setting for the user profi le. Average speed for every road type.
Adaptive: Option for additional automatic adjustment to the driving style.
Reset: If needed, reset the user profi le.
Touch the symbol to activate (check
mark) or deactivate (no check mark)
automatic traffi c jam detours with
TMC.
Touch the symbol to allow (check
mark) or disallow (no check mark)
motorways.
Touch the symbol to allow toll roads
in the add-on menu or to avoid them.
Touch the symbol to allow (check
mark) or disallow (no check mark)
ferries.
Touch the button.
The display shows the second
page of the menu.
Touch the symbol to allow (check
mark) or disallow (no check mark)
tunnels.
Touch the symbol to allow (check
mark) or disallow (no check mark)
seasonal roads.
Seasonal roads are roads that could
be closed depending on the season,
e.g. snowfall.
–
–
W
–
–
–
W
W
W
W
W
W
W
Specifying route options | Route guidance
27
Touch the symbol to allow (check
mark) or disallow (no check mark)
turning.
If you should not follow the turnby-turn direction, a new route can
be calculated instead of a turning
manoeuvre.
Touch this button to exit the
menu.
Route guidance
DANGER!
Disregarding traffi c rules can lead to
accidents
Follow the turn-by-turn directions only if the street
routing and traffi c rules allow it. The navigation
device will bring you to your destination even if
you have to deviate from the planned route.
Notes:
Repeat the voice output if you did not understand it (ch. "Voice output during route
guidance").
You can always use the map or arrow display for orientation purposes.
Start route guidance
If you start the route guidance, a route with the
route options is calculated. The destinations are automatically stored in the Last Destinations & Tours.
Touch the Start Route Guidance button.
The route is calculated and the route guidance
started.
Destination input during route
guidance
If you enter an additional destination during an active route guidance and start the route guidance,
you have two options:
You can insert the destination as interim destination. The route is recalculated and the
interim destination is approached next.
You start a new route guidance to the destination entered.
W
W
•
•
W
•
•
Reaching the place of destination
As soon as you have reached the destination
point, the message "You have reached your destination" appears. The map now displays only your
current position.
Quitting the route guidance
Touch the symbol in the map view.
The drop-down menu is displayed.
Touch the symbol and the Route
Guidance Options menu is displayed.
Touch the symbol to quit the route
guidance.
A confi rmation is displayed.
Touch Yes to quit the route guidance.
The map is displayed.
- or -
Touch No to continue the route guidance.
Disturbed GPS reception
External infl uences can interfere with the view to
the sky and, therefore, the GPS reception of the
navigation device (ch. "Troubleshooting table").
On the map, the symbol indicates that no
suffi cient GPS signal is being received. If
you start a route guidance at this point, the navigation device calculates the route based on the last
known position.
If the GPS reception is disturbed during route
guidance for an extended period of time, the route
guidance is stopped.
As soon as the reception is re-established, the device automatically recognises whether your position has changed and, if necessary, recalculates
the route. At that time, you can simply continue
your route guidance.
W
W
W
W
W
28
Offroad route guidance (geocaching) | Working with the map
Offroad route guidance
(geocaching)
Geocaching is the search for locations via GPS.
The coordinates of the locations, so-called geocaches, are provided on the Internet.
The device allows navigating completely without
considering streets and entering coordinates as
the destination. For offroad route guidance, select "Offroad" as the type of route calculation in
the route options. The navigation device then supports the route guidance like a digital compass:
An arrow points to the direction of the destination.
The distance to the destination (straight line)
is displayed.
A route is not being calculated.
No turn-by-turn directions are given.
A prerequisite in this case is suffi cient GPS reception.
Enter a destination (ch. "Destination input").
Select "Offroad" as route option (ch. "Specify-
ing route options").
Start the route guidance (ch. "Route guid-
ance").
Note:
Locations photographed by you can also be
used as possible destinations. If you want to
take a picture with the device, the location
of the photo is saved as coordinates with the
photo and can be selected as a destination
(ch. "Points of interest (POIs)".
•
•
•
•
W
W
W
Working with the map
Display map
Touch the symbol in the main
menu.
- or In any menu, touch the button
repeatedly until the map is displayed.
Moving and scaling the map
To view the desired destination area on the map,
you can move the map section and scale it (zoom
in and zoom out).
Touch one of the symbols to
zoom in or out of the map.
Touch the map and move the map in the desired direction.
The address or coordinates for the location
you touched are displayed.
Touch the button to return to
your current position.
Touching the map
Touch a location (a street or point of interest)
on the map.
The city is selected and the address or the
coordinates are displayed.
Touch the desired address or the coordinates.
The Position menu is displayed with additional buttons.
Touch the symbol to adopt the city as
the destination.
The route guidance is being started.
- or -
Touch the symbol to save the location.
The keyboard is displayed.
Enter a name for the destination and touch
OK.
W
W
W
W
W
W
W
W
W
W
Working with the map
29
The destination is stored under the name
entered in the My Destinations & Tours menu
(ch. "Destination/tour memory").
Buttons and symbols
In the map view, the following buttons are available:
Touch the symbol to reach the Navi-
gation menu.
In the map view, touch the symbol to
reach the map/navigation settings or
the route guidance options (ch. "Additional functions during route guidance").
Note:
The route guidance options are only available
during route guidance.
The display of destinations on the map must be
activated in the map/navigation settings.
Current destination
My Destinations & Tours
Home address
Last destination
Map/navigation settings
Perform the settings for the route guidance. For
example, specify the information to be shown on
the map. Select a different road map, adjust the
voice output or activate the speed limit warning.
Touch the symbol in the main
menu.
The map is displayed.
Touch the symbol in the map view.
The Map Settings menu is displayed.
If a route guidance is currently active, a dropdown menu is displayed:
W
W
W
W
Touch the symbol in the drop-down
menu.
The Map Settings menu is displayed.
Touch the button to scroll
through this menu.
If you performed changes to the settings:
Touch the button to exit the
menu.
Displaying the arrival/remaining driving time
You can adjust whether the arrival time or the
remaining driving time (travel time) are displayed
in the route information.
Touch the symbol to change
between the settings.
Switching auto zoom on/off
Auto zoom optimally adjusts the map scale during
route guidance to the respective driving situation.
That is, if you approach an action, the view is enlarged, e.g. so that you can clearly see the next intersection. If the next action is farther away, the
view is reduced so that you can easily see the run
of the road.
Touch the symbol to switch auto
zoom on (check mark) or off (no
check mark).
Selecting a dataset
A road map is pre-installed in the memory of the
navigation device. The enclosed CD/DVD offers
additional road maps depending on the device
variant as well as an installation program to copy
these road maps to your memory card.
Insert the memory card in the device as described in the chapter "Entertainment".
Switch on the navigation device.
The road maps are automatically loaded from
the memory card into the memory.
Touch the symbol on the third page
of the Map Settings menu.
A list of the available road maps is
displayed.
W
W
W
W
W
W
W
W
Loading...