Blaupunkt 530 Operating Instructions Manual

CAR MULTIMEDIA

SERIES 530

Operating instructions

Enjoy it.

Controls – Device

13

1

2

3

4

5

6

7

10

8

12

11

1

DIS button

Short press: Adjust the display brightness
Long press: Switch o the display

With inserted microSD card with navigation data:
Short press: Start the navigation
In navigation mode: Call up menu of active source
Long press: Switch o the display

2

MENU button

Short press: Call up main menu
In the main menu: Call up menu of active source
Long press: Call up Bluetooth® function directly

3

Rotary/pushbutton

Short press: Switch on device
In operation: Mute audio source
Long press: Switch o device
Turn: Adjust volume

4

Infrared receiver for remote control

5

Microphone

6

Cover

9

7

Reset button

Access only with open cover
Restoring the original factory settings of the device.
Caution! All personal settings will be lost!

8

microSD card reader

Access only with open cover
The card reader supports microSD cards on which
either audio/video  les or navigation data can be
stored.

9

AV-IN socket

Access only with open cover

:

USB socket

Access only with open cover

;

Touchscreen user interface

<

button (Eject)

Eject a DVD/CD

=

DVD/CD drive

2

15

16

17

18

19

20

21

22

23

24

25

26

27

28

?

HOME button

Call up main menu
In the main menu: Call up menu of active source

@

/ EJECT button

Eject a DVD/CD

A

RADIO button

Start radio mode

B

DISC button

Starting DVD/CD mode

C

DIS button

Short press: Adjust the display brightness
Long press: Switch o the display

D

/ ZOOM button

Call up overview of audio  les
Zoom in on image area

E

/ BAND button

Call up folder overview
Select waveband/memory bank

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

Controls – Remote control

F

AUDIO button

Select playback language (if available on DVD)

G

EQ button

Call up equaliser menu

H

/ / / button

Navigate in menus/lists
Tuning into stations manually (
Calling stored stations (

I

OK button

/ )

/ )

Con rm selection

J

MENU button

Call up DVD menu
Display the folder/ le list

K

Number buttons 0 - 9

L

/ RPT button

Repeat function

M

button

Delete last character of an entry

N

/ MIX button

Random track play

O

button

Ending/rejecting a phone call

P

button

Answer a call

Q

GOTO button

Directly select title, chapter, movie or playtime

R

button

Mute audio source

S

SETUP button

Call up settings menu

T

VOL + / – button

Adjusting the volume

U

/ ANGLE button

Call up overview of movies
Select camera viewing angle (if available on DVD)

V

/ SUBTITLE button

Call up overview of images
Select subtitle language (if available on DVD)

W

button

Start and interrupt playback

X

/ button

Select title, chapter, movie
Fast searching

Y

MAP button

Starting the navigation

Z

BT button

Starting Bluetooth mode

/ POWER button

[

Switching device on/o

\

SRC button

Select source

3

Contents

Safety notes ................................................................ 5

Symbols used ...........................................................................5

Road safety ................................................................................5

General safety notes ..............................................................5

Declaration of conformity ....................................................5

Cleaning notes ............................................................ 5

Disposal notes............................................................. 5

Scope of delivery ........................................................ 6

Placing the device in operation ................................. 6

Switching on/o ......................................................................6

Volume ........................................................................................6

Main menu ................................................................................6

Setting the reception area ................................................... 6

Radio mode ................................................................. 7

Start radio mode .....................................................................7

Select memory bank ..............................................................7

Tuning into a station ..............................................................7

Storing stations manually ....................................................7

Storing stations automatically (Travelstore) ................. 7

Scanning stations....................................................................7

Switching RDS on/o ............................................................7

Switching the REG function

(regional programmes) on/o ........................................... 8

Switching the AF (alternative frequencies)

function on/o .........................................................................8

Adjusting the seek tuning sensitivity ..............................8

Selecting the programme type and starting

seek tuning ................................................................................8

Switching priority for tra c announcements

on/o ...........................................................................................8

Navigation (only for devices with navigation) ......... 8

Loading navigation data ...................................................... 8

Download of map data .........................................................8

Starting the navigation .........................................................9

Initial startup ............................................................................9

Entering a destination ........................................................... 9

Address ......................................................................................9

Points of Interest ................................................................. 10

Setting route options ......................................................... 11

Map Settings .......................................................................... 11

DVD/CD/USB/microSDHC media playback ............. 12

Basic information ................................................................. 12

DVD/CD mode ...................................................................... 12

USB data carrier .................................................................... 13

microSDHC cards ................................................................. 13

DVD movie playback .......................................................... 13

Audio playback from DVD/CD, USB or microSDHC .. 14
Video playback from DVD/CD, USB or microSDHC ... 15
Image playback from DVD/CD, USB or audioSDHC .. 15

Bluetooth mode ........................................................ 16

Starting Bluetooth mode .................................................. 16

Registering Bluetooth devices ........................................ 16

Telephone mode - Bluetooth........................................... 16

Audio playback - Bluetooth .............................................. 17

Bluetooth settings ............................................................... 17

External audio/video sources .................................. 18

AV-IN socket ........................................................................... 18

Video input ............................................................................. 18

External monitor....................................................... 18

Sound settings .......................................................... 18

Volume distribution (fader/balance) ............................ 18

Equalizer .................................................................................. 19

Basic settings ............................................................ 19

General .................................................................................... 19

Video ......................................................................................... 19

Sound ....................................................................................... 20

Time .......................................................................................... 20

Language ................................................................................ 20

Bluetooth ................................................................................ 20

Volume ..................................................................................... 20

Useful information ................................................... 20

Warranty .................................................................................. 20

Service ...................................................................................... 20

Connection diagram ................................................. 21

Appendix ................................................................... 22

4

Safety notes | Cleaning notes | Disposal notes

Safety notes

The car sound system was manufactured according to
the state of the art and established safety guidelines.
Even so, dangers may occur if you do not observe the
safety notes in these instructions.

These instructions are intended to familiarise you with
the most important functions. Detailed information can
be found on the Internet under www.blaupunkt.com.

• Read these instructions carefully and completely
before using the car sound system.

• Keep the instructions at a location so that they
are always accessible to all users.

• Always pass on the car sound system to third parties
together with these instructions.

In addition, observe the instructions of the devices used
in conjunction with this car sound system.

Symbols used

These instructions employ the following symbols:

DANGER!

Warns about injuries

CAUTION!

Warns about damages to the DVD/CD drive

DANGER!

Warns about high volume

The CE mark con rms the compliance with EU
directives.

• Always listen at a moderate volume to protect

your hearing and to be able to hear acoustic warn­ing signals (e.g. police sirens). During mute phases
(e.g. when changing the audio source), changing the
volume is not audible. Do not increase the volume
during this mute phase.

General safety notes

Observe the following note to protect yourself against
injuries:

Do not modify or open the device. The device contains
a Class 1 laser that can cause injuries to your eyes.

Use as directed

This car sound system is intended for installation and
operation in a vehicle with 12 V vehicle system voltage
and must be installed in a DIN slot. Observe the output
limits of the device. Repairs and installation, if necessary,
should be performed by a specialist.

Installation instructions

You may only install the car sound system yourself if you
are experienced in installing car sound systems and are
very familiar with the electrical system of the vehicle. For
this purpose, observe the connection diagram at the end
of these instructions.

Declaration of conformity

The Blaupunkt Europe GmbH declares that the device
complies with the basic requirements and the other rel­evant regulations of the directive 1999/5/EC.

The declaration of conformity can be found on the Inter­net under www.blaupunkt.com.

쏅 Identi es a sequencing step

• Identi es a listing

Road safety

Observe the following notes about road safety:

• Use your device in such a way that you can always
safely control your vehicle. In case of doubt, stop
at a suitable location and operate your device while
the vehicle is standing. As the driver, you may not use
the applications that will distract you from tra c (de­pending on the scope of functions of the device, e.g.
viewing videos, entering a destination).

• Follow the driving recommendations during the

route guidance only if you are not violating any
tra c regulations! Tra c signs and tra c regula-

tions have always priority over driving recommenda­tions.

Cleaning notes

Solvents, cleaning and scouring agents as well as dash­board spray and plastics care product may contain in­gredients that will damage the surface of the car sound
system.

Use only a dry or slightly moistened cloth for cleaning the
car sound system.

Disposal notes

Do not dispose of your old unit in the household
trash!

Use the return and collection systems available to
dispose of the old device, the remote control and
exhausted batteries.

5

Scope of delivery | Startup

Scope of delivery

The scope of delivery includes:

• Car sound system

• Remote control (incl. battery)

• TMC tuner (only for devices with Europe navigation)

• microSD card with navigation data in the microSD
card slot (only for devices with navigation)

• GPS antenna

• External Bluetooth microphone

• Getting started

• Support frame

• Small parts set

• Installation material

• Connecting cable

Placing the device in operation

Caution!
Transport securing screws

Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de­vice.

Main menu

In the main menu, you press the buttons on the touch­screen to call up the di erent sources and operating
modes.

2

쏅 Press the MENU button

- Or -

쏅 In the current source, press the 

The main menu is displayed.

As long as you do not select a new audio source, the
last active audio source is played back.

Note:

The  gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.

.

 button.

Switching on/o

Switching on/o with the rotary/pushbutton

쏅 For switch-on, press the rotary/pushbutton

쏅 For switch-o , hold the rotary/pushbutton

pressed for more than 2 seconds.

Switching on/o via vehicle ignition

If the car sound system is connected with the vehicle
ignition and it was switched o with the rotary/pushbut-

3

, it is switched on or o with the ignition.

ton

3

.

3

Volume

Adjusting the volume

You can adjust the volume in steps from 0 (o ) to 50
(maximum).

쏅 Turn the rotary/pushbutton

ume.

Muting the car sound system (Mute)

쏅 Brie y press the rotary/pushbutton

device or to reactivate the previous volume.

3

to change the vol-

3

to mute the

Setting the reception area

This car sound system is designed for operation in di er­ent regions with di erent frequency ranges and station
technologies. The factory default of the reception area is
"Europe (FM/AM)". If you operate the car sound system
outside of Europe, e.g. in the US or Asia, you may  rst
have to set a suitable reception area in the menu:

쏅 In the main menu, press the  Settings  button.

The Settings menu is displayed.

쏅 In the bottom area of the Settings menu, press the

 General  button.

The current setting is displayed behind "Radio region".

쏅 Tap twice (double-click) on the  Radio region  but-

ton to display the list of available reception areas.

쏅 Select the desired reception area by double-clicking.

The list is hidden, the selected reception area is set.

쏅 Press the 

The main menu is displayed again.

 button.

6

Radio mode

Radio mode

Start radio mode

쏅 In the main menu, press the  Radio  button.

The radio playback menu is displayed.

Select memory bank

Di erent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.

쏅 Press the 

memory bank is displayed.

FM1 씮 FM2 씮 FM3 씮 AM1 씮 AM2 씮 FM1

Tuning into a station

Tuning into stations manually

쏅 Brie y press the 

eral times to change the frequency in increments.

 button repeatedly until the desired

 or   button once or sev-

Storing stations manually

쏅 Select the desired memory bank with the   but-

ton.

쏅 Set the desired station.
쏅 Press one of the memory buttons  P1  -  P6  for

approx. 2 seconds to store the current station at the
button.

The station is stored.

Storing stations automatically
(Travelstore)

With Travelstore, you can automatically search for and
store the 6 FM stations o ering the strongest reception
in the region in the current memory bank. Any previously
stored stations in this memory bank are deleted in the
process.

쏅 Select a memory bank.
쏅 Press the 

ing options.

쏅 Press the  TS  button.

The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se­lected memory bank.

Note:

For the reception area Europe: With switched-on pri­ority for tra c information, only tra c information
stations are stored.

 button to display additional operat-

Enter broadcast frequency directly

If the frequency of the desired stations is known, it can
be entered directly via the touchscreen.

쏅 Press the 

ing options.

쏅 Press the 

A numeric keypad is displayed for the frequency
input.

쏅 Enter the frequency of the desired station with the

numeric keypad.

쏅 Press the  OK  button.

The radio playback menu is displayed, the station of
the frequency entered is played back.

Starting station seek tuning

쏅 Press the 

onds to start station seek tuning.

The radio tunes into the next receivable station.

Note:

For the reception area Europe: In the FM waveband,
only tra c information stations are tuned into if the
priority for tra c information is switched on.

 button to display additional operat-

 button.

 or   button for approx. 2 sec-

Scanning stations

You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.

쏅 Press the 

The seek tuning searches for stations in the current
waveband. Each receivable station is played for a few
seconds in the process.

쏅 Pressing the 

scanned station and plays it back.

 button.

 button again selects the currently

Switching RDS on/o

Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.

쏅 Press the 

ing options.

쏅 Press the  RDS  button to switch the RDS function

on or o .
If the RDS function is switched on, RDS is displayed

in white.

쏅 Press the 

ating options, or wait until they are automatically
hidden.

 button to display additional operat-

 button to hide the additional oper-

7

Radio mode | Navigation

Switching the REG function (regional
programmes) on/o

Some RDS stations divide their programmes into region­al programmes with di erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.

쏅 Press the  REG  button to switch the REG function

on or o .
If the REG function is switched on, REG is displayed

in white.

Switching the AF (alternative frequencies)
function on/o

If the AF function is activated, the car sound system auto­matically tunes into the best receivable frequency for the
station that is currently set.

쏅 Press the  AF  button to switch the AF function on

or o .
If the AF function is switched on, AF is displayed in

white.

Adjusting the seek tuning sensitivity

The seek tuning sensitivity decides whether the auto­matic station seek tuning  nds only strong stations or
also weaker stations that may be noisy.

쏅 Press the  LO  or  DX  button to adjust the sensitiv-

ity of station seek tuning.
If LO is displayed, only stations with a strong signal

are found during seek tuning.
If DX is displayed, stations with a strong and weak

signal are found during seek tuning.

Selecting the programme type and
starting seek tuning

You can select a programme type with the PTY function
to purposefully search for stations, for example, that
broadcast rock music or sport events.

쏅 Press the 

ing options.

쏅 Press the  PTY  button to display the programme

types.

쏅 Scroll through the list with 

the desired programme type to select it.

쏅 Press the  PTY  button to start PTY seek tuning.

If a station broadcasts a programme with the select­ed programme type, this station is played back.

 button to display additional operat-

 /   and tap on

Switching priority for tra c
announcements on/o

In the reception region Europe, an FM station can iden­tify tra c announcements via an RDS signal. If priority for
tra c reports is switched on, a tra c report is automati­cally switched through, even if the car sound system is
currently not in radio mode.

쏅 Press the  TA  button to switch the priority for tra c

announcements on or o .

If the priority for tra c announcements is switched
on, TA is displayed in white.

Navigation
(only for devices with navigation)

Loading navigation data

The navigation software and map data are located on a
microSD card. For devices with navigation, the device is
delivered with the microSD card in the microSD card slot.
To be able to use the navigation, the microSD card must
be inserted in the card slot.

Important note:

The card reader supports microSD cards on which
either audio/video  les or navigation data can be
stored. The microSD card for the navigation may not
contain any other  les besides the navigation data.

6

쏅 Open the cover

ton.

쏅 Insert the microSD card with its labelled side to the

left ( attened corner to the top) and its contacts  rst
into the card slot

Download of map data

To ensure that you have the latest version of the map data
when you purchase the device, you have 30 days from
the  rst GPS positioning to download the latest version
of the map data once and free of charge to the standard
microSD card from the Internet at www.naviextras.com.

You can always purchase map material from this site at
a later time.

Important note:

If the microSD card is lost or damaged, the naviga­tion map license associated with the card will be lost.
In this case, the license must be purchased anew with
a new microSD card.

underneath the rotary/pushbut-

8

until it clicks into place.

8

Navigation

Starting the navigation

쏅 In the main menu, press  Navigation  to start the

navigation mode.

The navigation menu is displayed. If you start the
navigation for the  rst time, the setup wizard is dis­played.

Initial startup

If you start the navigation for the  rst time, a setup wizard
appears which performs the basic settings for the naviga­tion.

쏅 Adjust the language for the navigation. This can be

a di erent language from the other functions of the
device.

쏅 Con rm the selection with 

The end-user license agreement is displayed.

쏅 Read the end-user license agreement. If you agree

with the terms and conditions, press 

The con guration wizard starts.

쏅 Press 

쏅 Select a voice for the voice output of the navigation.

Various voices are available for the languages.

쏅 Con rm the selection with 

쏅 Specify the time format and the units for the naviga-

tion. Next, press 

On the next screen, you can perform your preferred
route settings.

쏅 If necessary, change the entries by pressing the dis-

played menu entries.

쏅 Press 
쏅 Touch 

The navigation menu is displayed.

 to continue.

.

, after you adjusted the settings.

, to  nish the con guration.

.

.

.

Entering a destination

Destinations can be entered in di erent ways: Via the ad­dress or as point of interest from the database of points
of interest. Points of interest can be sights, museums, sta­diums, petrol stations.

Address

쏅 Open the navigation menu.
쏅 Press on  Find .

The menu for the destination entry is displayed.

쏅 Press  Find Address .

The menu for the address entry is displayed.

쏅 Enter the country, city and street in succession as

well as the intersection or house number. To do so,
press the corresponding entry in the address entry
menu.

A menu for text entry is displayed.

쏅 Enter the desired destination via the keyboard.

With every character entered, the entry in the input
line is automatically completed.

9

Navigation

쏅 If the name of the desired destination is displayed in

the address line, press the 

The selected destination is displayed on the map.

쏅 Press  Next  to start the route guidance.

The calculation of the route starts. Depending on the
distance between start and destination, the route
calculation may take some time.

After the route calculation is complete, the param­eters of the route, such as distance and time, are
displayed. In addition, the entire route is displayed
on the map.

 button.

The point of interest menu is displayed.

쏅 You can select a point of interest from one of the

four prede ned categories Petrol Station, Parking,
Restaurant and Accommodation or start a separate
search.

쏅 For example, press on  Petrol Station  to quickly

 nd a petrol stations.

A list of petrol stations in the vicinity of the vehicle is
displayed. The petrol stations are sorted by distance
to vehicle.

쏅 Press  Go!  to start the route guidance.

Points of Interest

쏅 Open the navigation menu.
쏅 Press on  Find .

The menu for the destination entry is displayed.

쏅 Press  Find Places .

쏅 Select a petrol station from the list by pressing on the

list entry.

The petrol stations is displayed on the map.

쏅 Press  Next .

The route course and the route data are displayed.

쏅 Press  Go!  to start the route guidance.

10

Navigation

Setting route options

In the route options, the vehicle type, type of route
(quick, short, dynamic) and additional parameters are
de ned which are required by the device to calculate the
route according to your requirements.

You de ne the route options during the initial con gura­tion of the navigation, but you can change them for any
route guidance.

Adjusting route options before the route guidance

쏅 Call up the navigation menu.
쏅 Press  More… .

쏅 Change the settings, if necessary.
쏅 Press  Back  repeatedly until the navigation menu

is displayed again.

Changing route options during route guidance

쏅 During a route guidance, press the  More  button.

쏅 Press  Route Settings .

The route settings are displayed.

쏅 Change the settings, if necessary.
쏅 Press  Back .

The route guidance is displayed again.

쏅 Press  Settings .

The settings menu for the navigation is displayed.

쏅 Press on the   button to display the second page.
쏅 Press  Route Settings .

The route settings are displayed.

Map Settings

With the map settings, you can adjust the view mode
(2D or 3D), the viewing angle of the map, the colours and
the display of buildings and points of orientation on the
map. In addition, you can specify for categories of points
of interest whether they should be displayed on the map,
e.g. car dealerships, cafés, restaurants.

쏅 Call up the navigation menu.
쏅 Press  More… .
쏅 Press  Settings .

The settings menu for the navigation is displayed.

쏅 Press on the   button to display the second page.
쏅 Press  Map Settings .

11

Navigation | DVD/CD/USB/microSDHC media playback

The map settings are displayed.

쏅 Change the settings, if necessary.
쏅 Press  Back  repeatedly until the navigation menu

is displayed again.

Note:

You can also change the map settings during the
route guidance:

쏅 During a route guidance, press the  More  button.
쏅 Press  Map Settings .

The map settings are displayed.

쏅 Change the settings, if necessary.
쏅 Press  Back .

The route guidance is displayed again.

DVD/CD/USB/microSDHC media
playback

Basic information

The car sound system can be used to play audio DVDs/
CDs (CDDA) and DVD/CD-R/RWs with audio or MP3  les
as well as MP3 or WMA  les on USB data carriers and
microSDHC cards.

In addition, you can view movies and images from DVDs/
VCDs/CDs, USB data carriers and microSDHC cards on the
display or a connected monitor.

For safety reasons, the playback of movies and images on
the integrated monitor is allowed only while the vehicle
is standing and the hand brake is applied. The "BRAKE"
cable must be connected with the hand brake connec­tion of the vehicle (see Connection diagram at the end
of these instructions). The movie playback on an external
monitor is also possible while driving.

Notes:

• To ensure proper functioning, use only CDs with
the Compact-Disc logo and DVDs with the DVD
logo.

• Blaupunkt cannot guarantee the  awless func­tion of copy-protected DVDs/CDs and all DVD/CD
blanks, USB data carriers and microSD cards avail­able on the market.

Note the following information when preparing an MP3/
WMA data carrier:

• Naming of tracks and directories:
– Max. 32 characters without the  le extension

".mp3" or ".wma" (the use of more characters re­duces the number of tracks and folders that the
car sound system can recognise)

• DVD/CD formats: DVD/CD-R/RW, Ø: 12 cm

• DVD/CD data formats: ISO 9669 Level 1 and 2, Joliet

• CD burn speed: Max. 16x (recommended)

• USB format/ le system: mass storage device / FAT/

FAT16/FAT32

• microSD card  le system: FAT/FAT16/FAT32

• File extension of audio  les:
– .MP3 for MP3  les
– .WMA for WMA  les

•WMA  les only without Digital Rights Management

(DRM) and created with Windows Media® Player ver­sion 8 or later

• MP3 ID3 tags: Version 1 and 2

• Bit rate for creating audio  les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps

• Maximum number of  les and directories:
– USB medium: Up to 10,000 entries
– microSD cards: Up to 10,000  les.

DVD/CD mode

Inserting a DVD/CD

Risk of severe damage to the DVD/CD drive!

Noncircular contoured DVDs/CDs and DVDs/
CDs with a diameter of 8 cm (mini DVDs/CDs)
must not be used.

We accept no responsibility for any damage to the
drive that may occur as a result of the use of unsuitable
DVDs/CDs.

쏅 Insert the DVD/CD with its printed side up into the

=

DVD/CD tray

The drive automatically draws in the DVD/CD and
checks its data. Afterwards, the playback starts in
DVD/CD or MP3 mode.

Note:

You must not hinder or assist the drive as it automati­cally draws in the DVD/CD.

Ejecting a DVD/CD

쏅 Press the

Note:

You must not hinder or assist the drive as it ejects the
DVD/CD.

until you feel a slight resistance.

button < to eject an inserted DVD/CD.

12

DVD/CD/USB/microSDHC media playback

USB data carrier

This device features a USB port under the cover at the
front of the device.

Connecting a USB data carrier

6

쏅 Open the cover

ton.

쏅 Insert the USB data carrier in the USB socket

The device automatically switches to USB mode. The
data are read, the playback starts with the  rst media
 le recognized by the device.

Removing the USB data carrier

쏅 Turn o the car sound system.

쏅 Disconnect the USB data carrier.

underneath the rotary/pushbut-

:

.

microSDHC cards

This device features an microSDHC card slot under the
cover at the front of the device.

Inserting the microSDHC card

6

쏅 Open the cover

ton.

쏅 Insert the microSDHC card with its labelled side to

the left ( attened corner to the top) and its contacts
 rst into the card slot

The device automatically switches to microSDHC
mode. The data are read, the playback starts with the
 rst media  le recognized by the device.

underneath the rotary/pushbut-

8

until it clicks into place.

쏅 Brie y touch the touchscreen once to display the

playback menu again.

The playback menu is shown.

[ ] Pause playback, call up DVD menu.

] Select previous chapter.

[

/ ] Interrupt playback and continue playback.

[
[

] Select next chapter.

] Call up keypad for direct selection of titles,

[

chapters or playing time.

] Show additional operating options.

[

쏅 Tap on 

tions of the playback menu.

 to display additional operating op-

Removing the microSDHC card

6

쏅 If necessary, open the cover

쏅 Push on the microSDHC card until it disengages.

쏅 Pull the microSDHC card out of the card slot

.

8

.

DVD movie playback

The car sound system can play video DVDs and VCDs. Af­ter inserting the DVD, the playback starts automatically.
The DVD menu is displayed.

You can navigate in the DVD menu by touching the corre­sponding buttons in the DVD menu on the touchscreen.

After starting the movie via the menu of the DVD, the
movie is displayed. The playback menu for DVDs is hid­den.

[ ] Hide additional operating options.

] Display equalizer.

[

] De ne range for repeat function.

[

] Select playback language (only if supported

[

by the DVD).

] Show subtitles (only if supported by the

[

DVD).

] Switch repeat function for title, chapter or

[

area A-B on/o .

] Adjust image.

[

13

DVD/CD/USB/microSDHC media playback

Audio playback from DVD/CD, USB or
microSDHC

The principles of audio playback (MP3/WMA) from data
carriers are identical for all sources.

쏅 Select the desired source via the main menu.

The device changes to the desired source and the
playback starts.

If the playback does not start with the audio playback,

쏅 press the 
쏅 Press the 

files of the data carrier.

- Or -

쏅 Press the 

the data carrier.

 button to change to the folder/file list.

 button to display all the folders and

 button to display all the audio  les of

/ ] Interrupt playback and continue playback.

[
[

] Short press: Title selection.

Long press: Fast searching.

[

] Show additional operating options.

쏅 Tap on 

tions of the playback menu.

[ ] Hide additional operating options.

] Display keypad to directly enter the number

[

] Start and end REPEAT function.

[

 to display additional operating op-

of the desired title.

The REPEAT mode changes each time the


 button is pressed.

[ ] Scroll through the list page by page.
[

] Scroll through the list page by page.

] Change to next higher folder level.

[
[

] Open selected folder or start titles.

- Or -

Brie y tap twice (double-click) on the name
of the folder/track. The folder is opened/the
track is started.

] Exit the folder/ le list.

[

After starting a title, the playback menu is displayed.

Display REPEAT mode

Repeat current track

Repeat current folder

Repeat all tracks of data carrier

[

] Start MIX random track play and end it

again.

If the MIX function is switched on, the
symbol is displayed in white.

The MIX mode depends on the selected
REPEAT function.

REPEAT
mode
display

MIX mode

No random track play

Mixing tracks of the current
folder

Mixing tracks of the data
carrier

[ ] Display the folder/ le list.

] Short press: Title selection.

[

Long press: Fast searching.

14

[

] Display equalizer.

DVD/CD/USB/microSDHC media playback

Video playback from DVD/CD, USB or
microSDHC

쏅 Select the desired source via the main menu.

The device changes to the desired source and the
playback starts.

If the playback does not start with the video playback,

쏅 press the 
쏅 Press the 

files of the data carrier.

- Or -

쏅 Press the 

of the data carrier.

Note:

Folders and videos are selected and started as de­scribed under audio playback.

If you selected a movie, the playback is started. During
the movie playback, the playback menu is hidden.

쏅 Brie y touch the touchscreen once to display the

playback menu again.

The playback menu is shown.

 button to change to the folder/file list.

 button to display all the folders and

 button to display all the video  les

쏅 Tap on 

tions of the playback menu.

[ ] Hide additional operating options.

] Display equalizer.

[

] Switch repeat function for movie or folder

[

] Adjust image.

[

 to display additional operating op-

on/o .

Image playback from DVD/CD, USB or
audioSDHC

쏅 Select the desired source via the main menu.

The device changes to the desired source and the
playback starts.

If the playback does not start with the image playback,

쏅 press the 
쏅 Press the 

files of the data carrier.

- Or -

쏅 Press the 

the data carrier.

 button to change to the folder/file list.

 button to display all the folders and

 button to display all the images of

[ ] Display the folder/ le list.

] Select previous movie.

[

/ ] Interrupt playback and continue playback.

[

] Select next movie.

[

] Call up keypad for direct selection of movie

[

or playing time.

] Show additional operating options.

[

Note:

Folders and images are selected and started as de­scribed under audio playback.

15

Bluetooth mode

Bluetooth mode

The Bluetooth® function allows registering cell phones
and media playback devices with the car sound system.

When you register a cell phone with the car sound sys­tem, you can make phone calls with the built-in hands­free function. You can access the lists of dialled numbers
and the phone book of the registered cell phone.

If the connected Bluetooth® device supports the func­tions A2DP and AVRCP, you can play the music via the
car sound system and control the playback. During a call,
the music playback is interrupted and continued again
after the call.

If a cell phone is registered via Bluetooth® and a call is re­ceived during the playback of another source, the source
playback is interrupted and the call menu is displayed.

Starting Bluetooth mode

쏅 In the main menu, press on  Bluetooth .

- Or -

2

쏅 Press the MENU button

The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched o .

for approx. 2 seconds.

Registering Bluetooth devices

If you want to register a device with the car sound system
for the  rst time, proceed as follows:

쏅 Ensure that Bluetooth® is activated at the car sound

system and at your Bluetooth® device.

쏅 In the options menu of the Bluetooth® mode, enter a

pairing code (see Bluetooth® settings).

쏅 Search for new devices/connections on your Blue-

tooth® device.

쏅 The car sound system appears as "BP 530" in the list

of Bluetooth® devices.

쏅 Establish the connection; you may have to enter the

pairing code that was previously entered on the car
sound system.

The connection is being established and the menu
for the registered device is displayed.

Note:

If a telephone is connected with the car sound sys­tem, the Bluetooth® icon
right edge of the display in all audio/video sources.

is displayed at the top

Telephone mode - Bluetooth

If you connected a phone with the car sound system via
Bluetooth®, the following menu appears.

[ ] Add new Bluetooth® device.
[

] Display options menu.

쏅 Press the  Connect  button of the Bluetooth® de-

vice with which you want to establish a connection.

When the device is in range, the connection is estab­lished and the menu for the device is displayed.

쏅 Press the  Delete  button if you want to delete the

Bluetooth® device from the list.

16

[ ] Display the phone menu.

] Display the playback menu.

[

] Disconnect connection with current device.

[

] Call up the phone book.

[

] Call up caller lists.

[

] Display options menu.

[

쏅 Enter a phone number with the keypad and press the

 button.



- Or -

쏅 Select a contact/number via the caller lists or phone

book and press the  Dial  button in the pop-up
window.

The connection is being established.

Bluetooth mode

If a call is coming in, the call menu is displayed.

[ ] Reject a call.

] Answer a call.

[

Audio playback - Bluetooth

If an audio streaming device is connected with the car
sound system via Bluetooth®, you can play back the mu­sic via the car sound system and control the playback.

쏅 Press the 

back.

[ ] Display the phone menu.

] Display the playback menu.

[

] Disconnect connection with current device.

[

] Short press: Title selection.

[

] Interrupt playback and continue playback.

[
[

] Short press: Title selection.

] Display equalizer.

[

 button to change to the audio play-

Long press: Fast searching.

Long press: Fast searching.

Bluetooth settings

In the options menu for Bluetooth®, you can make the
basic settings for the Bluetooth® mode.

쏅 Press the 

The options menu is displayed.

Bluetooth – Bluetooth® can be switched on or o .
Auto connect – If "Auto Connect" is activated, the

device automatically connects with known Blue­tooth® devices as soon as they are in range.

Auto answer – If "Auto Answer" is activated, incom­ing phone calls are automatically answered.

Microphone – Select the microphone to be used for
the hands-free system via Bluetooth®.

Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You
can de ne it here.

Phone book sync – To be able to access the phone
book of a connected telephone, you must  rst syn­chronise it via this menu entry.

쏅 Press 

 button.

 to exit the options menu.

17

External audio/video sources | External monitor | Sound settings

External audio/video sources

AV-IN socket

This device features an external AV input for audio and
video playback. The AV-IN socket is located under the
cover at the front of the device.

Danger!
Increased risk of injury from connector.

In case of an accident, the protruding connec­tor in the AV-IN socket may cause injuries. The use of
straight plugs or adapters leads to an increased risk of
injury.

쏅 Start the AV-IN mode with the button  AV-IN .

The display shows the audio or video playback of the
AV source.

External monitor

This device features an output for connecting an external
monitor for the rear area of the vehicle (see Connection
diagram at the end of these instructions).

쏅 Select the desired source via the main menu and

start the  lm playback, e.g. from a DVD.

The  lm is displayed on the monitor of the device.

쏅 Call up the main menu.
쏅 Press the 

The  lm is also displayed on the external monitor.

 button.

Sound settings

Volume distribution (fader/balance)

You can adjust the volume distribution in the vehicle
for all sources.

쏅 In the main menu or on the control bar of the current

audio source, press the 

The equalizer menu is displayed.

쏅 Press the 

The menu for fader and balance is displayed.

 button.

 button.

Video input

This device features a video input at the rear of the device
for connecting a camera that is available as an option. If a
camera is connected, you can display the camera image.

쏅 In the main menu, press the  Camera  button.

쏅 Adjust fader and balance with   /   or

 /  .



쏅 Next, press 

The setting is stored, the current source is displayed
again.

.

18

Sound settings | Basic settings

Equalizer

You can adjust the equalizer for all sources.

쏅 In the main menu or on the control bar of the current

audio source, press the 

The equalizer menu is displayed.

쏅 Select a preset equalizer via the buttons.

- Or -

쏅 Press the  User  button to adjust the level of the

available frequency bands according to your prefer­ences.

Note:

With the [ Reset ] button, you can reset the custom­ised setting again.

- Or -

쏅 Press the  Flat  button for a linear sound playback.
쏅 Press the  Loudness  button to switch increasing

the bass at low volume on or o .

쏅 Next, press 

The setting is stored, the current source is displayed
again.

.

 button.

Basic settings

In the settings menu, you can adjust the basic settings
for the di erent functions of the device to your require­ments.

쏅 In the main menu, press the [ Settings ] button.

The settings menu is displayed, the General sub­menu is activated.

쏅 Call up the submenus with the buttons in the lower

area of the settings menu.

General

The following settings are possible:
Radio region – Select the reception region for the radio

reception.
Blackout – If this value is set, the display of the radio is

completely switched o after 10 or 20 sec. without use.

Dimmer mode – Adjust the display brightness
Beep – Switch con rmation beep on/o
TFT calibration – The touchscreen can be calibrated

here.
SWC – The buttons of a connected steering wheel con-

trol can be con gured here.
Software version – Display of the current software ver-

sion.
Load factory settings – Resets all personalised settings.

Video

The following settings are possible:
Set password – De ne a password if you want to use the

parental controls.
Rating level – The rating of DVDs can be de ned here.

If set to "Adult", all movies can be played back. If a pass­word was con gured, the rating level can be changed
only with the password

19

Basic settings | Useful information

Sound

The following settings are possible:

Subwoofer – Switch subwoofer on/o
Subwoofer  lter – Make the setting according to the

subwoofer used (settings: 80/120/160 Hz).

Dynamic sound – Switch dynamic bass on/o

Time

The following settings are possible:

Date – Set the date
Clock mode – Selection between 12 and 24-h mode
Time – Set the time
Auto clock – Switch automatic clock setting on or o

with the time data transmitted via RDS.

Language

The following settings are possible:

OSD – Language for the user interface of the device.
DVD audio – The audio playback of DVDs is started in the

language de ned here.
DVD subtitle – The subtitles of DVDs are shown in the

language de ned here.
DVD menu – The DVD menu is displayed in the language

de ned here.

Useful information

Warranty

We provide a manufacturer's warranty for products
bought within the European Union. For devices pur­chased outside the European Union, the warranty terms
issued by our respective responsible domestic agency
are valid. The warranty terms can be called up from
www.blaupunkt.com.

Service

If you ever need to use a repair service, you will  nd in­formation about service partners in your country under
www.blaupunkt.com.

Bluetooth

The following settings are possible:

Bluetooth – Bluetooth® can be switched on or o .
Auto connect – If "Auto Connect" is activated, the device

automatically connects with known Bluetooth® devices
as soon as they are in range.

Auto answer – Phone calls from connected telephones
are automatically answered if this option is enabled.

Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You can
de ne it here.

Microphone – Select the microphone to be used for the
hands-free system via Bluetooth®.

Volume

You can adjust the volume ratio for all audio sources in
the volume menu.

20

Subject to technical changes!

21

Connection diagram

Appendix

This item incorporates copy protection technology that
is protected by U.S. patents and other intellectual prop­erty rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.

Windows® und Windows Media® are registered trade­marks of the Microsoft Corporation in the U.S.A. and/or
other countries.

This product is protected by certain intellectual property
rights of Microsoft. Use or distribution of such technolo­gy outside of this product is prohibited without a license
from Microsoft.

The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.

Manufactured under license from Dolby

Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.

FCC Statement

1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in­cluding interference that may cause undesired operation.

2. Changes or modi cations not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu­ant to Part15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter­ference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in ac­cordance with the instructions, may cause harmful inter­ference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter­ference to radio or television reception, which can be de­termined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit dif­ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV techni­cian for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of
20 centimeters between the radiator and your body.

22

© 2014 All rights reserved by Blaupunkt. This material may
be reproduced, copied or distributed for personal use only.

11/13

Blaupunkt Europe GmbH
Robert-Bosch-Straße 200

D-31139 Hildesheim

http://www.blaupunkt.com