Blaupunkt 207I-GB-3B-HP, 2207I-GW-3W-HP, 236I-GW-3W-HP, 236I-GB-3B-HDP, 207I-GB-3B-HDP User Manual

LED TV with Freeview & USB PVR

User Guide

236/207I-GB-3B-HP
236/207I-GW-3W-HP
236/207I-GB-3B-HDP
236/207I-GW-3W-HDP

Model No

236/207I-GB-3B-FHP
236/207I-GW-3W-FHP
236/207I-GB-3B-FHDP
236/207I-GW-3W-FHDP

Important safety instruction

Please read these instructions. All
the safety and operating instructions
should be read before the appliance
is operated.

Warnings

• Television sets which weigh 20kg or more must be

lifted and carried by at least 2 people.

• This television does not contain any parts that are

serviceable by the user. In case of a fault, contact the
manufacturer or authorised service department.
Exposing the internal parts inside the TV may endanger
your life. The manufacturers guarantee does not
extend to faults caused by repairs carried out by
unauthorised third parties.

To prevent spread of fi re,
keep candles or other open
fl ames away from this product
at all times

• To reduce the risk of fi re, electric shock or damage

to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects fi lled with liquids on or near the TV.

• Do not connect any external devices (DVD player,

games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.

• Do not place the television in a confi ned space and

do not obstruct the ventilation openings at the rear of
the television.

• When installing on a wall, ensure the TV is at

least 5cm from the wall for ventilation.

• Always ensure that the TV’s ventilation openings

are not covered with items such as newspapers, table­cloths, curtains, etc.

• Dispose of this television and any components

including batteries in an environmentally friendly
manner. If in doubt, please contact your local authority
for details of recycling.

• Ensure this TV is used in moderate climates only.

WARNING: Never place a television set on an
unstable location. A television set may fall,
causing serious personal injury or death. Many
injuries, particularly to children, can be avoided
by taking simple precautions such as:

• Use cabinets or stands recommended by the

manufacturer of the television set.

• Only use furniture that can safely support the

television set.

• Ensure the television set is not overhanging the

edge of the supporting furniture.

• Do not place the television set on tall furniture

(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.

• Do not place the television set on cloth or other

materials that may be located between the television
set and supporting furniture.

• Please educate children about the dangers of

climbing on furniture to reach the television set or its
controls.

• If your existing television set is being retained and

relocated, the same considerations as above should be
applied.

Safety

• For your safety, this appliance is fi tted with a fused

3 pin mains plug. Should the fuse need to be replaced,
ensure that any replacement is of the same amperage
and approved with the BSI mark.

• Never try and replace the mains plug unless

you have adequate qualifi cations and are legally
authorised to do so. In the event that a replacement
mains cable is required, contact the manufacturer for a
suitable replacement.

• Never use the television if it is damaged in any way.

• Always place the television on a fl at level surface

avoiding anywhere which may be subject to
strong vibration.

• The ideal distance to watch the television is

approximately fi ve times the length of the diagonal
measurements of the TV screen.

• Ensure the television is not placed on top of the

power cable as the weight of the television may
damage the cable and cause a safety hazard.

• Never place mobile phones, speakers or any

other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.

• To disconnect the apparatus from the mains, please

use the mains plug located on the underside/rear of
the TV.

• Ensure that the mains plug is always easily

accessible.

WARNING: Excessive noise when using
earphones and headphones can cause loss of
hearing.

4

5

Important safety instruction

Maintenance

• To clean your TV, wipe with a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.

• Never use alcohol, paint thinner or benzene to

clean this unit.

• Before using a chemically treated cloth, read the

instructions that came with the cloth carefully.

2. Do not display the  xed image for extended periods
of time.

3. Turn the power o when not in use.

Examples of images that are more likely to cause “screen burn”
are as follows (this is not an exhaustive list):

• TV channel logos: e.g. shopping channel logos

and pricing displays - especially if they are bright and
stationary. Moving or low-contrast graphics are less
likely to cause ageing of the screen.

• Time displays.

• Teletext: Do not view a stationary page for a long

period of time

• TV/DVD menus: e.g. listings of DVD disc content.

• Pause mode: Do not leave the TV in

pause mode
for long periods of time, e.g. when
watching DVDs
or videos.

CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.

Packaging

• The safest way to transport your item is in the

original box/packaging - please save your packaging
for this.

• You will need the original box/packaging in the

event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable
to package the item correctly.

Important information regarding use of video
games, computers, captions or other  xed image
displays

The extended use of  xed image program material can cause
a permanent “shadow image” on the LCD/LED panel, also
known as “screen burn”.

This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following steps:

1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.

Important: Once ‘shadow image/
screen burn’
occurs, it will never disappear and
is not
repairable under warranty.

How do I dispose of this
product?

UK: Waste electrical products should not be disposed of with

household waste. Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please see www.recycle­more.co.uk or in store
for details.

ROI: Waste electrical products should not be disposed of with
household waste. Separate disposal facilities exist. Check with
your local authority or retailer for recycling advice.

Cd

Batteries

• Do not expose batteries to high temperatures,

excessive heat, prolonged sunshine or fi re as this may
cause leakage, explosion or ignition.
Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way.

• Certain regions may regulate the disposal of

batteries. Please consult your local authority.

TV Models with built in DVD players

CAUTION:

THIS UNIT IS A CLASS 1 LASER PRODUCT. THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK
INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1
LASER PRODUCT

This caution label is located on the rear panel of the unit

5

Trademarks

The terms HDMI and HDMI High-De nition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.

HDTV

The “HD TV” Logo is a trademark of DIGITALEUROPE.

HDTV 1080p

The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.

DVB

The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.

Dolby

Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.

FREEVIEW

The FREEVIEW words and logos are trade marks of DTV
Services LTD. © DTV Services Ltd.

SAORVIEW

SAORVIEW is a registered trademark owned by RTÉ.

6

7

CONTENTS

Manufacturers Guarantee Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Attaching / Detaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Securing the TV to a Wall / Wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TV Buttons and Input Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TV Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-24

Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Picture Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19

Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Time Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

System/Hotel Lock Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DVD Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

7 Day TV Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

USB Record - Digital / Freeview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

USB Mode / Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-34

Using your TV with a Sky digital set top box . . . . . . . . . . . . . . . . . . . . . . . . 29

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31

Technical Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-34

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

7

What is included in the box

WHAT IS INCLUDED IN THE BOX

Accessories

Included with this TV are the following accessories

1 x User Guide

User Guide

1 x Quick Start Guide

Quick Start

Guide

1 x TV

1 x Remote Control

2 x AAA Batteries

1 x Stand Installation Pack
(Includes stand base, stand neck & screws)

1 x RF Cable

Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.

8

9

Attaching/Detaching the Stand

ATTACHING/DETACHING THE STAND

Attaching the stand

To complete the stand installation you will require a cross head screw driver

There are two types of screws provided as shown below.

4 x ST (4x12)3 x M (4x12)

Used for attaching the stand base
to the stand neck ( g.3)

3 x
M (4x12)

Used for attaching the stand neck
to the TV ( g.1)

11/2

12

(fi g.1) Attach the stand neck to the
rear of the TV set using the 3 x M(4x12)
screws provided.

When securing the self-tapping screw/s into the base of the stand (on
fi rst installation) the screw/s will be naturally tight as they create a

4 x ST (4x12)

thread in the plastic of the stand neck in order to support a TV of this size.
a) Ensure the cross head screw driver tip fi ts correctly into the head of the

screw and that it is not too big or small.
b) Screw in all screws individually and partially before tightening all of the

screws fully.
c) If they become very tight try loosening them slightly and then re-tightening

them once again as this will continue the process of creating the thread for
the screws.

(fi g.2) Peel off the protective plastic cover
then attach the stand base to the stand neck.

3

(fi g.3) Secure the base to the neck by
using the 4 x ST (4x12) screws provided.

Detaching the stand

Remove the screws highlighted then remove the stand base and neck from the rear of the TV set.

9

Securing the TV to a Wall/Wall Mounting

SECURING THE TV TO A WALL

Securing the TV to a Wall

For maximum security in the home when using a TV with its stand anti-tip straps should be fi tted. These
are available from supermarket websites and other websites and are an easy, inexpensive and effective
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and
then tethered to the wall or the furniture the TV is stood on.

Note - Please ensure that children do not climb on the TV set.

A) Using one or both of the top wall-mounting
holes and screws (the screws are already supplied
in the wall mounting holes) fasten one end of the
fastening cord/s to the TV.

The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.

RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”

The risk is increased as televisions become lighter.

B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable
for your wall type - available separately from most
DIY stores).

Wall Mounting

IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electrical wires, water or gas pipes.

For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fi g 1 and 2.

g 1 fig 2

Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to internal parts.

INCORRECT

Viewing angle

10

1) Remove the four screws highlighted that are supplied in the wall
mounting holes.

2) The wall mount can now be easily attached to the mounting holes on
the rear of the TV.

For VESA wall mounting information please refer to the Technical
Specifi cation page.

TV

CORRECT

TV

Viewing angle

11

Remote Control

REMOTE CONTROL

STANDBY - Switch on TV when in standby or vice versa

1

MUTE - Mute the sound or vice versa
DTV - Switch to Freeview source
RADIO - Switch to radio whilst in Freeview source
USB - Switch to USB source
DVD - Switch to DVD source

NUMBER BUTTONS - 0 – 9 to select a TV channel directly.

2

TV GUIDE - Opens the 7 Day TV Guide (Freeview mode)

- To return to the previous channel viewed

VOL (+/-) - To increase / decrease the sound level

3

P.MODE - Scrolls through picture mode options
S.MODE - Scrolls through sound mode options
FAV - To display favourites menu
CH (+/-) - To increase or decrease the channel being watched
MENU - To display OSD menu
EXIT - To exit all menus

and adjust the system settings to your preference
SOURCE - To display the input/source menu
INFO - Press once for now/next channel information
Press twice for programme information about current
programme

- Allows you to navigate the on-screen menus

1

2

3

ASPECT - To switch the screen between the different picture

4

formats
SLEEP - Press repeatedly to cycle through the sleep options
AUDIO - To change the audio language (if available)
SUBTITLE - To switch the dialogue at the bottom of the screen
(on/off)
TEXT - To enter/exit Text
TEXT HOLD - Teletext mode - Hold current page which is
displayed (Analogue TV)
DISPLAY - To switch off the screen when listening to radio
TEXT/DVD ZOOM - Zoom function for Teletext and DVD
DVD MENU/RECORD - Access the DVD root menu and USB
record function

- To restart the current chapter

- To advance forward to the next chapter

- To stop the playback/Eject Disc
(To EJECT the disc press/hold the

- To play in fast rewind mode

- To play in fast forward mode

- To play/pause

DVD SETUP/REC LIST - Opens up DVD Menu or Opens the list
of what has been previously recorded

GOTO - To go to a specifi c chapter
A-B - Press once to set point, press a second time to return
to point
ANGLE - Select different angle of DVD

REPEAT - To repeat playback

button for 4 seconds)

4

For Models with Integrated DVD players

For Models with PVR Function

For Models with USB Playback

11

TV BUTTONS AND INPUT SOURCE MENU

This information is for models

without built in DVD players

Volume up and menu right

1

2

Volume down and menu left

3

Programme/Channel up and menu up

4

Programme/Channel down and menu down

Displays Menu/OSD

5

6

Displays the input source menu

This information is for models

with built in DVD players

1

1

2

3

4

5

6

7

Stop/Eject Disc

1

2

Play/Pause Disc

3

Volume up and menu right

4

Volume down and menu left

Programme/Channel up and menu up

5

6

Programme/Channel down and menu down

2

3

4

5

6

7

8

9

Standby Power On/Off

7

Choosing Mode Input/Source

To switch between the different input/
connections.

A) Using the buttons on the remote control:

1) Press [SOURCE] - The source menu will appear.

2) Press [\/] or [/\] to select the input you require.

3) Press [OK].

B) Using the buttons on the Television:

1) Press [SOURCE].

2) Scroll up / down using CH+/ CH- buttons to
the input/source you require.

3) Press Vol+ to change input/source to the
one selected.

For further information on input/connections
please view ‘Connections’ pages.

Displays Menu/OSD

7

Displays the input source menu

8

9

Standby Power On/Off

Component / YPbPr

Example of Source menu

depending on the TV model

12

13

Connections

CONNECTIONS

K

CI CARD IN

J

USB

I

COAX

Pb

EARPHONE

A

A

EARPHONE Earphone socket

B

Video Component / Video input

C

YPbPr HD input (Ypbpr)

D

E

HDMI 1 HDMI input

F

HDMI 2 (ARC) HDMI input

SCART SCART input

G

RF IN RF / TV Aerial Input

H

COAX Audio Out Digital Coax output

I

USB USB port

J

K

CI CARD IN Common Interface module

VIDEO

B

L/R

L

C

R/L Audio shared for
Video/Composite and
component/ YPbPr

Y

R

Pr

D

E

F

GH

13

Connections

CONNECTIONS

Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is
Included In The Box’ page.

Connecting to a device with Composite AV/Video output

TV Source should be set to Composite/AV

L (white)

R (red)

Video
(yellow)

L (white)

R (red)

Video
(yellow)

Connecting to a device with SCART output

TV Source should be set to SCART

Scart

Scart

Connecting to a device with HDMI output

A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.

TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)

HDMI HDMI

14

15

Connections

CONNECTIONS

Connecting to a device with Component/YPbPr output

If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors
you must connect via Component (for picture) and by phono cable (for sound).

TV Source should be set to Component/YPbPr

Y (green)

PB (blue)

PR (red)

L (white)

R (red)

Y (green)

PB (blue)

PR (red)

L (white)

R (red)

Connecting to an external audio device (Amplifi ers, Surround Sound,
Sound Bars etc)

When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.

There are two options to connect a device via the 3.5mm Earphone Output.

3.5mm

earphone

3.5mm

earphone

OPTION 1 for 3.5mm EARPHONE Output

OPTION 2 for 3.5mm EARPHONE Output

3.5mm
audio

in

L (white)

R (red)

COAX
audio

out

COAX
audio

in

15

17

TV Menu Operation

CHANNEL MENU

To access this menu, press [MENU] button on the remote control.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and

analogue channels

Analogue Manual Tuning - Allows you to manually tune your analogue signal

Freeview Manual Tuning - Allows you to manually tune your digital signal*

Channel Edit - Allows you to delete, move, skip and add favourite channels

Schedule List - Lists your programme reminders

Signal Information - Allows you to view signal frequency, signal quality and signal strength

CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to

a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be

inserted into the COMMON INTERFACE PORT (CI Card In)

Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu

17

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Picture Mode - Choose from the following presets:

Dynamic Recommended settings for fast moving pictures

Standard Standard settings

Mild Set to be lighter in colour and less bright

Personal Lets you manually alter all the settings

Economy Power saving mode which reduces the energy used by up to

25% (by reducing the power to the LED/LCD panel).

In Economy mode, the TV will switch itself to Standby mode

after 3-5 hours in the event that the TV buttons or remote

control buttons are not pressed (change the picture mode

to another setting to de-activate this function)

You can make the following adjustments in

Contrast - Switch the balance between black and white.

Brightness - Increase or decrease the brightness of the picture.

Colour - Increases the colour from black and white.

Tint - Lets you increase or decrease the level of tint within the picture

(only available in VGA/PC source mode).

Sharpness - Increase or decrease the sharpness of the picture.

Colour Temperature Choose from the following presets:

Normal Default settings

Warm Increases red within the picture

Cold Increases blue within the picture

Personal mode:

Noise Reduction - Choose from the following presets:

Off Turns noise reduction off

Low Minor system adjustment

Middle Medium system adjustments

High Maximum system adjustments

18

19

TV Menu Operation

PICTURE MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a

number of different options to best meet your needs

Auto

Automatically displays the best picture format. So the
picture is in the correct position. May have black lines

at the top/bottom and/or sides.

Original

Will display the picture from the broadcaster
without any change

4:3

Displays the 4:3
picture in its
original size.
Side bars are
shown to fi ll the
16:9 screen

16:9

Fills the screen
with a regular
16:9 signal and
4:3 picture
format will be
stretched to fi ll
the screen

Full Screen

Displays the
full picture
in the correct
proportion.
As a result bars
may be shown on
the screen

Zoom

The picture
is the correct
proportion
but zoomed
in to fi ll the
screen

19

TV Menu Operation

SOUND MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Sound Mode - Choose from the following presets

Standard Default settings

Music Emphasises music over voices

Movie Provides live and full sound for movies

Sports Emphasises sound for sports

Personal Selects your personal sound settings

Treble - To adjust the amount of high frequency within the sound

Bass - To adjust the amount of low frequency within the sound

Balance - To switch the sound between the left and right speakers

Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level

regardless of TV programme and advertisements

Digital Output - This is the digital COAX Audio output. Choose from the following options:

Off To turn off Digital Output

Auto Selects the best settings automatically

PCM Select this option if you are connecting to a Stereo Hi-fi via coax cable (Pulse-code

modulation (PCM) is a digital representation of an analogue signal)

Audio Description - This allows the user to increase and decrease the AD (Audio Description) volume level.

(Audio Description is a service available on certain programmes. It provides a description of what is

happening during the selected programme for a person who is visually impaired)

Audio Delay - Enables the user to adjust setting to sync picture and audio

Tip: Treble and bass levels can only be
adjusted when the sound mode ‘Personal’
is selected.

20

21

TV Menu Operation

TIME MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Clock - Shows the date and time

Off Time - Allows you to set a specifi c time for your TV to turn off

On Time - Allows you to set a specifi c time for your TV to turn on, the channel it will then display, the

source it will be on and also the volume. This function can then be toggled to repeat every day or a

certain day (the TV must be in standby mode for this to be effective)

Time Zone - Change your current time zone

Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount of

time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min

Auto standby - Set Auto standby between 3 hours, 4 hours and 5 hours ( to turn off this function you must

exit Home Mode in the Picture Menu)

OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before

disappearing

21

TV Menu Operation

SYSTEM/HOTEL LOCK MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password

Use the

TV Button Lock - Allows you to lock the buttons on the side of the TV set

Parental Guidance - Allows you to set the rating to block certain content based on age information

Default Source - Allows the user to set the default source. The default source is the source the TV starts on

when fi rst switched on

Default Channel - Allows the user to set a channel as the default channel on the Digital source. The

default channel is the channel the TV starts on when fi rst switched on

Source Lock - Allows you to lock the source menu

Channel Lock - Allows you to lock certain channels manually

Max Volume - Allows you to adjust and set the maximum volume

Change Password - Allows you to change the password

◄ button to quit the password input or use the ► button to clear. Default password is 0000.

22

23

TV Menu Operation

SETUP MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]

If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.

Language - Allows you to change the language of the menu

Audio Language - Shows the current audio language

Subtitle Language - Shows the current subtitle language

Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this produces subtitles

on the screen which provide a description of what is happening during the selected program.

PVR File System - Allows you to view the format and performance of a USB key

Blue Screen - Changes the background when there is no input between clear and a blue background (Only

available on some sources)

First Time Installation - Allows you to access the First Time Installation menu and retune the TV set

Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.

Software Update (USB) - From time to time we may release new fi rmware to improve the operation of

the television (available to download). This menu lets you install the new software/fi rmware onto the

television. Further details of how to do this will be issued with the fi rmware. Contact the helpline or refer

to the ‘product support’ section of the website

HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user

to operate multiple devices with one remote control. (only available with compatible devices)

LED Status - Allows the user to switch the LED Power indicator light ON or OFF, when the TV is being

operated. (When this option is set to OFF the LED Power indicator light will fl ash when the remote

control is used)

23

25

DVD Menu Operation

DVD SETUP

(Applies to models with built in DVD player)

To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]

If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.

TV Display - Choose from the following options

4:3 Pan scan PS Traditional picture format, often used on old fi lm

4:3 Letter box LB Traditional picture which has been adapted for widescreen

Wide 16:9 Widescreen picture format

Speaker Setup - Choose from the following options

LT/RT Converts from multi-channel sound to mono

Stereo Converts from multi-channel sound to stereo

Dual Mono - Choose from the following options

Stereo Outputs 2 channels of sound both left and right

Mono L Outputs left side sound

Mono R Outputs right side sound

Mix Mono Outputs a single channel of sound but mix between right and left

Dynamic Range - This is the difference between the quietest and loudest sounds. This setting works only

with DVD discs recorded in Dolby digital.

Full Set this to listen with the range recorded on the disc

3/4 Set this to listen with a range equivalent to a normal television

1/2 Set this to listen with a smaller difference between the maximum and minimum volume

buttons.

1/4 Set this to listen with a smaller difference between the maximum and minimum volume

Off Set dynamic range to off

TV Type - Choose from the following options

PAL For discs from UK/Europe, Asia, Australia etc

Multi For both NTSC and PAL

NTSC For discs from North America, Japan etc

Default - Choose from the following options

Reset Resets all options in the ‘DVD setup’ menu back to the default settings

Tip: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD in
another country that uses different region discs, please visit www.umc-uk.co.uk. Select ‘Product Support’,
‘Changing Region’.

25

7 Day TV Guide

7 DAY TV GUIDE

TV Guide is available in Freeview TV mode. It provides information about forthcoming programmes
(where supported by the Freeview channel). You can view the start and end time of
all programmes and on all channels for the next 7 days and set reminders.

1) Press [TV GUIDE]. The following 7 Day TV Guide will appear..

2) Navigate through the menu using

You can now:
Record a programme by pressing RED (USB device must be connected)
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE

3) Press [EXIT] to exit the 7 day TV Guide.

EXIT

26

27

USB Record

USB RECORD - DIGITAL/FREEVIEW MODE

USB RECORD – DIGITAL/FREEVIEW MODE
Built into this television is a USB record facility. This function is available in Digital/Freeview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are
as follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV)

• One button record, if you decide you want to record the current programme

• Easy programmable recording from the 7 day TV Guide

• Record TV and watch/listen back on your computer/laptop

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable)

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site.

Minimum Specifi cation - USB Memory Stick

Read Speed 20 MB/s (Mega Byte Per Second)

Write Speed 6 MB/s (Mega Byte Per Second)

If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear
of this user guide.

Pause Live TV (Time Shift)

Pausing Live TV is very simple.

- Press the play/pause button and the television will pause and the live

content will be recorded. To resume watching press play/pause again.

- Press fast forward to go forward in a recording (i.e. to skip adverts)

- Press fast rewind to go back in a recording (i.e. if you fast forwarded

too far)

Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart
time shift you must press play/pause button.

One Button Record

At any point in time you may decide to record the current channel that you are watching. To do this you
need to press the red button highlighted below.

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or
record one channel while the television is in standby mode.

Note: USB record function is only avilable in Digital/Freeview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.

27

USB Mode / Media Player

USB MODE/MEDIA PLAYER

USB mode offers playback of various different types of content that you have saved on your USB
Memory Stick.

On switching to USB source the below menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on fi le type.

1) You can navigate through the menus using the
scroll

wish to play/view press [OK] button.

3) You can now access the item. Press OK to view. 4) Whilst viewing your media, you can control

buttons. To confi rm the item you

2) Select the drive you require. (If your drive only
has 1 partition you will only see 1 item).

the item by using the remote control buttons
(below) or by pressing (INFO) to access the
on-screen playback menu, you can now make
your selection by using the
buttons on the remote control.

and (OK)

Tip: If you experience a playback issue, please ensure the fi les being used are the correct format
(example - the picture plays but no sound) See technical specifi cation page for compatible fi le types

Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality
and stoppages during play back of USB content.

28

29

General Information

USING YOUR TV WITH A SKY DIGITAL SET TOP BOX

Option 1) Connecting your TV to your Sky box (when both the TV and Sky Box are located
in the same room)

Depending on your Sky Box & TV model, connect either by SCART or HDMI cables
(available separately).

If connecting by SCART, select the ‘Input source’ on the TV as SCART. If your TV does
not have SCART, please refer to ‘Connections’ pages in this user guide for alternative
ways to connect.

If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has more
than 1 HDMI port, ensure you select the input source to match the HDMI numbered port

SCART
or HDMI
cable

on the rear of the TV).

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky
remote control (Revision 9 or later) and you will need to program a 4 digit code into it.
See bottom of this page.

Option 2) Connecting your TV
to your Sky box (when your
Sky box is located in a different
room to the TV)

Please note, if you are adding a ‘Magic
Eye/TV Link’ to your system so that
you can use your Sky remote control
to change the Sky channel in the room
where the 2nd TV is located, please

SCART
or HDMI
cable

RF/COAX cable from
Sky Box to 2nd TV

refer to the instructions included
with the TV link/magic eye in order to
ensure the RF or RF2 output on your
Sky box is powered on. (The red LED
light on the TV link/magic eye will light

Sky Box

Connect to RF
or RF2 output
on the Sky box

up if the RF / RF2 output is correctly set
up) If you do not have the instructions
that came with the TV link/magic eye, instructions on how to do it can be found on our web site.

Connect to the
Aerial/RF input
on the 2nd TV

TV Link/Magic Eye
(optional)

Sky Box

2nd TV in
another room

1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.

2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you).

3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.

4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)

5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the
Sky box/channel is found, press ‘OK’ to store it.

If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control (Revision 9 or
later) and you will need to programme a 4 digit code into it. See below.

Using a Sky remote or a universal remote to operate your TV

Sky remote control - If you wish to use your Sky remote to operate the basic functions of your TV, you need to
program a 4 digit code into it. Please note - you will need a Sky Revision 9 remote control (or later). The code
required for this television is 2134. If you wish to upgrade/replace your existing Sky remote control to the latest

version, you can do so on our website.

Universal remote control - If you wish to use a Universal remote control to operate your TV, please refer to the
website for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you
have an alternative brand of Universal remote, please refer to the manufacturer for the code.)

29

General Information

FREQUENTLY ASKED QUESTIONS

General I would like to have louder

General Why are some options in the

General Can I stop my TV automatically

TV I have tuned in Digital TV but I

TV I have re-tuned my television

VCR/DVD
Recorder

sound by connecting additional
speakers.

menu unavailable and greyed
out.

turning o after 4hrs?

am not receiving any or all of the
channels and/or the channels I
receive are breaking up.

but when I switch it o it is not
storing the channels.

I have connected the TV to my
VCR or DVD Recorder via SCART
but it is not recording.

1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available separately) to
connect to an ampli er/surround sound system. Please note this will deactivate the TV’s built
in speakers.

2) Connect a COAX cable from the TV’s COAX output to your ampli er/surround systems
COAX input.

Some options are only available in certain sources, i.e. HDMI. They are
unavailable in the other sources where they have no a ect.

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or
www.saorview.ie

2) Check you are using an aerial that is able to receive a good digital signal. In most cases,
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will
also need to connect a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.

If the TV does not save the channels when you power it o , it’s likely the channel database
has become corrupt.

1) Turn o the TV.

2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.

3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst

time installation menu.

4) Press OK (let the TV run the full tuning process).

5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back

on again.

6) Repeat steps 3 & 4.

In addition to connecting via SCART, you should connect the aerial cable from the wall
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to
the TV.

Game Consoles I have connected my

Playstation/Xbox to the TV via
HDMI, but I am not receiving
any pictures or sound on my
Television.

Game Consoles I have connected my

Playstation/Xbox to the TV via
Component cables (red, green
& blue) but I am not receiving
any sound.

System Lock I have changed the password

on the television and now
forgotten it.

USB Mode I have inserted a USB Memory

Key, but the TV does not
recognise it.

USB Mode Using a USB portable hard drive

/ larger than 32GB.

1) Ensure the TVs’ source is set to HDMI.

2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox
instruction manual.

Component cables only provide HD pictures. For the sound you will need to connect the red
& white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV
input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.

There is a master password of 4711, to gain access to the TV menu and reset the
normal password.

Ensure the USB Memory Key is formatted to type FAT32.

If you wish to use a portable hard drive larger than 32GB, please note that it must be
formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista
computers are only capable of formatting up to 32GB, therefore, you will need a software
programme/utility to format larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.

30

31

General Information

FREQUENTLY ASKED QUESTIONS

DVD (For TV models
with DVD only)

DVD (For TV models
with DVD only)

USB Record I cannot change the channel,

USB Record When using the USB to record

I have inserted a disc but it is
not playing.

I have pressed the eject button
but the disc is not coming out.

access the menu or use the red
button.

the picture ‘breaks up’ or
experience loss of sound.

1) Ensure you have inserted the disc facing the correct way.

2) Ensure the disc is clean and is not scratched.

3) Some copied discs will not play.

4) Check the DVD is a region 2 disc – to change the region of the DVD player, refer to
www.umc-uk.co.uk, select ‘Changing DVD Region’ in the ‘Product Support’ section

To eject the disc hold the stop/eject button for 4 seconds.

During time shift you cannot change the channel, access the menu or use the red button.

Check the USB memory stick meets the minimum read speed requirements. Standard
de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a

write Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80
MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0
sticks should be used where possible.

31

TECHNICAL SPECIFICATION

Product  che (24” HD Ready Models)

General Information

Supplier

Model ID

236/207I-GB-3B-HP

236/207I-GW-3W-HP

Blaupunkt

236/207I-GB-3B-HDP

236/207I-GW-3W-HDP

(Models with inbuilt

DVD player)

Energy e ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On mode average power consumption 25.0 W

Annual energy consumption *1

37 kWh

Standby power consumption *2 <0.50 W

O mode power consumption 0 W

Screen resolution 1366 (H) x 768 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 1 x USB, 1 x SCART,

1 x Component/Y Pb Pr, 1 x Composite/Video,

1 x shared audio for Composite/Video &

Component/YPbPr

Sound Outputs 1 x 3.5mm Headphone, 1 x COAX audio output

Speaker / Ampli er Watts (RMS) 2 x 3

Voltage and power consumption

Dimensions including stand (mm)

Net weight (Kgs) 4.6 4.9

Wall Mounting VESA 100 x 100 (mm)

110-240v 50 / 60Hz

25/40W (ecomode/max)

560W x 386H x 140D

110-240v 50 / 60Hz

25/50W (ecomode/max)

32

33

General Information

TECHNICAL SPECIFICATION

Product  che (24” Full HD Models)

Supplier

Model ID

236/207I-GB-3B-FHP

236/207I-GW-3W-FHP

Blaupunkt

236/207I-GB-3B-FHDP

236/207I-GW-3W-FHDP

(Models with inbuilt DVD

player)

Energy e ciency class A

Visible screen size (diagonal) 60 cm / 23.6 inches

On mode average power consumption 25.0 W

Annual energy consumption *1 37 kWh

Standby power consumption *2 <0.50 W

O mode power consumption 0 W

Screen resolution 1920 (H) x 1080 (V)

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.

Additional Technical Information

RF 75 ohm Antenna / Analog / DVB

Inputs 2 x HDMI, 1 x USB, 1 x SCART,

1 x Component/Y Pb Pr, 1 x Composite/Video,

1 x shared audio for Composite/Video &

Component/YPbPr

Sound Outputs 1 x 3.5mm Headphone, 1 x COAX audio output

Speaker / Sound Watts (RMS) 2 x 3

Voltage and power consumption 110-240V 50 / 60Hz

25/40W (ecomode/max)

Dimensions including stand (mm)

Net weight (Kgs) 4.6 4.9

Wall Mounting VESA 100 x 100 (mm)

560W x 386H x 140D

110-240V 50 / 60Hz

25/50W (ecomode/max)

33

TECHNICAL SPECIFICATION

Compatible fi les in USB Mode

General Information

Media File Ext.

.mpg MPEG-1, MPEG-2

.avi

.ts MPEG-2, H.264

Movie

Music

.mov/

.mkv

.dat MPEG-1

.mp4

.vob MPEG-2

.mp3 - MP3

.wma - WMA

.m4a/

.aac

Codec

Video Audio

Xvid, MJPEG,

MPEG-4 SP/ASP,

H.264

MPEG-4 SP/ASP,

H.264

MPEG-4 SP/ASP,

H.264

MPEG-1, MPEG-2

- AAC

MP3, WMA,

AAC

Remark

Max Resolution: 1920x1080

Max Data rate: 40 Mbps

Max Resolution: 1920x1080

Max Data rate: 20 Mbps

Max Resolution: 720x576

Max Data rate: 40 Mbps

Sample Rate 8K-48KHz
Bit rate: 32K - 320Kbps

Channel: Mono/Stereo

Sample Rate 16K-48KHz

Bit rate: 32K ~ 442Kbps

Channel: Mono/Stereo

.jpg/

.jpeg

Photo

.bmp BMP

.png

Progressive JPEG Max Resolution: 1024x768

Baseline JPEG Max Resolution: 8192x8192

Max Resolution: 6500x6500

Pixel Depth 1/4/8/16/24/32 bpp

Non-Interlaced Max Resolution: 3000x3000

Interlaced Max Resolution: 1500x1500

34

BLA/MAN/0307