Page 1
OPERATION MANUAL
CDP-3/5
SPEED SWITCH
Page 2
2
www.blaubergventilatoren.de
CDP-3/5
BLAUBERG Ventilatoren GmbH is happy to o er your attention the speed
switch CDP-3/5.
INTRODUCTION
The present operation manual contains technical description, technical
data sheets, operation and mounting guidelines, safety precautions and
warnings for safe and correct operation of the device.
Read carefully the operation manual, especially the safety requirements
before mounting and start-up of the device.
Keep the operation manual available as long as you use the device.
GENERAL
The CDP-3/5 speed switch is designed for switching on/o and speed
switching of ventilation units and fans.
SAFETY RULES
Cut o power supply to the device prior to any operations.
All mounting and maintenance operations must be carried out by duly
quali ed electricians with a valid electrical work permit for electric operations
after careful study of the user’s manual.
Misuse of the device or any unauthorized modi cation are not allowed.
Follow the manual guidelines to ensure trouble-free operation and long
service life of the device.
STORAGE AND TRANSPORTATION RULES
Transportation is allowed by any vehicle provided the product is
transported in the original package and is protected against weather and
mechanical damages.
Store the delivered product in the manufacturer’s original packing box in
a dry ventilated premise.
The storage environment must not be subjected to any aggressive and/
or chemical evaporations, admixtures, foreign objects that may provoke
corrosion and damage connection tightness.
Store the product in an environment with minimized risk of mechanical
damages, temperature and humidity uctuations at the ambient temperature
from +5°C up to + 40°C.
MANUFACTURER’S WARRANTY
The product complies with the requirements according to the EU norms
and directives, to the relevant EU-Low Voltage Equipment Directives, EUDirectives on Electromagnetic Compatibility.
The product complies with the requirements according to the
EU norms and directives, to the relevant EU-Low Voltage Equipment
Directives, EU-Directives on Electromagnetic Compatibility.
We hereby declare that the following product complies with the essential
protection requirements of Electromagnetic Council Directive 2004/108/
EC, 89/336/EEC and Low Voltage Directive 2006/95/EC, 73/23/EEC and
CE-marking Directive 93/68/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
The manufacturer hereby warrants normal operation of the product over
the period of 2 years from the retail sale date provided observance of the
installation and operation regulations.
In case of failure due to manufacturing fault during the warranty period
the consumer has the right for the device repair or exchange.
The replacement is o ered by the Seller.
If case of no con rmation of the sale date, the warranty period shall be
calculated from the manufacturing date.
The MANUFACTURER shall not be liable for any damage resulting from
any product misuse of or gross mechanical interference with it.
The MANUFACTURER is not responsible for the damages resulted due to
the use of third party equipment or to third party equipment.
DELIVERY SET
Speed switch CDP-3/5;
Operation manual;
Packing box.
WARNING
Do not dispose in domestic waste. The product
contains in part material that can be recycled and in
part substances that should not end up as domestic
waste. Dispose the product once it has reached the end
of its working life according to the regulations valid in
your country.
WARNING
The product is not allowed for use by children and persons with reduced
physical, mental or sensory capacities, without proper practical experience
or expertise, unless they are controlled or instructed on the product operation by the person(s) responsible for their safety. Supervise the children and
do not let them play with the product.
!
TECHNICAL DATA
Table 1. Technical data
Model
Parameters
Supply voltage,
50-60 Hz [V]
Max. load current
[A]
Max. output
power [VA]
Operating
temperature
range [°C]
Operating
humidity range
[%]
Ingress
Protection Rating
Weight [g]
CDP-3/5 230 3 600
from -10
up to +40
max. 80 IP40 130
Page 3
www.blaubergventilatoren.de
3
CDP-3/5
0
1
2
3
88
88
65
MOUNTING
CONNECTION TO POWER MAINS
CONTROL
Mounting sequence of the speed switch, g. 2:
1. Pull and remove the speed switch knob.
2. Carefully undo the latches on the front panel with a screwdriver and
remove it.
3. Route the cable to the installation place of the speed switch.
4. Connect the wires to the speed switch and x the back panel to the wall
through the xing holes.
5. Install the front panel and the speed switch knob.
Подключение переключателя к вентиляционным установкам
и вентиляторам производится согласно схеме, указанной на
Рис.3.
Fig. 1. Overall dimensions Fig. 2. Mounting
Fig. 3. Wiring diagram
Fig. 4. Сontrol
N
N
L
L
N
B
C
L
H
2
30 V / 50-60 Hz
M
M
high
speed
low
speed
middle
speed
M - ventilation equipment
3
O
1
2
3OFF
To activate the required speed of the connected ventilation
equipment rotate the speed switch knob clockwise and position it
according to the required speed marking, fig. 4:
— low speed;
— middle speed;
— high speed.
To turn the connected ventilation equipment off rotate the
speed switch knob counterclockwise and set it into «0» position, the
maximum left position.
!
!
WARNING
WARNING
Make sure that the speed switch is not damaged.
Do not use a damaged speed switch Do not install
the speed switch on an uneven surface! While
tightening the screws avoid overtightening not to
damage the device.
Cut off power supply to the speed switch prior to
any operations with the speed switch.
All mounting and servicing operations are
allowed for duly qualifi ed electricians with valid
electrical work permit for electric operations after
careful study of the present operation manual.
For connection of the speed switch to ventilation
units and fans follow the wiring diagram, fi g. 3.
Page 4
www.blaubergventilatoren.de
СDP-3/5 v.4(2) / 05-2014 / EN
Speed switch
is r
ecognizes as serviceable.
Approval mark Manufacturing date____________________
SELLER
SALES DATE
REPRESENTATIVE IN EU
BLAUBERG Ventilat
oren GmbH
Aidenbachstr. 52a
D-81379 Munich, Germany
ACCEPTANCE CERTIFICATE
WARRANTY CARD
CDP-3/5
CDP-3/5
Loading...