Page 1
AH-5 160 Duo
INSTALLATION INSTRUCTION
EN
OUTER VENTILATION HOOD
Page 2
2
www.blaubergventilatoren.de
Outer ventilation hood AH-5 160 Duo
The outer ventilation hood is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside.
PURPOSE
THE OUTER VENTILATION HOOD MAY NOT BE OPERATED BY CHILDREN OR PERSONS
WITH REDUCED PHYSICAL, MENTAL OR SENSORY CAPACITIES, OR LACKING THE
APPROPRIATE TRAINING.
THE CHOICE OF THE VENTILATION HOOD INSTALLATION LOCATION MUST PREVENT
UNAUTHORIZED ACCESS BY UNATTENDED CHILDREN.
OVERALL DIMENSIONS, MM (INCH)
260
ΓΈ 162
(6
3
/8")
310
(12 3/16")
260
(10
1
/4")
93
(3
11
/16")
OUTER VENTILATION HOOD MOUNTING
1. Insert the air duct from indoor to protrude from outside on
the outer wall surface.
Cut the air duct excess and a stream spreader with a hack saw
or with any other suitable tool.
WARNING! If the mounting place is located at high
altitude please refer to a mounting company possessing
an appropriate mounting equipment!
min 3 mm
0-2 mm
(0
"-1/16")
2. Mark the fastening holes for the outer ventilation hood and
drill 4 holes, 50 mm deep to suit the expansion anchors (6x40).
Use the back wall of the ventilation hood to facilitate the marking.
246
(9
11
/16")
194
(7
5
/8")
6mm(
1
/4")
4 holes
Page 3
www.blaubergventilatoren.de
3
Outer ventilation hood AH-5 160 Duo
3. Insert the supplied expansion anchors 6x40 into the holes.
Disassemble the outer ventilation hood to enable access to the
fastening holes. Undo the 6 screws to remove the ventilation
hood front part.
4. Fix the back wall of the ventilation hood on the wall using the
supplied screws 4x40.
5. Cover the ventilation hood with the front part.
Page 4
www.blaubergventilatoren.de
AH-5 160 Duo v1(2)EN
Loading...