Blanco BIC75T User Manual
BIC75T
`v
75cm, 4 Zone Touch Control Induction Cooktop
Model Code
BIC75T
Description
75cm, 4 zone induction cooktop, touch control, no frame
Warranty
BLANCOCare™ 2 years parts & labour
Features Benets
9 stage scrolling temperature settings
Boost Functions
Large 21 cm zone with 3000W power
Overow cut off
Pot detection
With 9 different settings, you can select the ideal cooking temperature for all types of foods to provide the perfect cooking results.
Convenient feature on 2 of the zones whereby the cooking zone
selected ‘boosts’ to the maximum power level and will stay on
maximum power for several minutes (unless deactivated).
A zone that is big enough to accommodate most pots and pans
and powerful enough to cook even the most heat demanding
dish ie stirfry
Safety feature of the cooktop, the unit will shutdown automatically if:
- Pan is boiling over and spills into the touch controls
- A damp towel is placed over the touch controls
Once a pot in placed on any zone it will automatically detect it
and heat up the zone accordingly. Once the pot is removed the
zone will cool down immediately.
Specications
Method of installation: Benchtop
Dimensions: 770W x 510D mm
Cut-out Size: 750W x 490D mm
Please allow an extra mil on all sides to cater
for screws that project out on all 4 sides
Induction Zones: 4 zones
Controls: 9 stage touch control
Connection cable length: 1.6m
Power requirement: 6.4 kW
Connection: 220-240V – 32 amp - hard wirng required
Element Ratings Zone Diameters
Front Left : 1400/2000W 190mm
Rear Left : 1400W 160mm
Front right : 1400W 160mm
Rear right : 2300/3000W 210mm
Locking function
99 minute Timer on all zones
A safety feature to help prevent children from accessing cooktop controls. User can either ‘lock’ the cooktop either whilst in
operation or when it is off.
Each zone has its own 99 minute timer function - a convenient and
easy way to program the cooking time on any cooking zone. When
the timer ends a beep will sound to advise the cooking is nished.
Note:
- Must leave 50mm clearance from bottom of cooktop to dividing shelf.
- Must allow a fresh air intake and an air outlet of 4mm minimum.
- Measurements are within 2/3mm factory tolerance.
- It is advisable to check dimensions of physical product before cutting out for installation.
*Due to continual product development the information provided is not nal and may be subject to
change
Loading...