Blanco BCCT9X Instructions For The Use And Care And Installation

Instructions for the Use and Care and Installation of

BCCT9X

Touch Control Cooktop

Dear Customer
You will find that the modern look of your Blanco rangehood blends in perfectly with your

kitchen décor. It is easy to use and performs to a high standard.
Blanco also makes a range of products that will enhance your kitchen – such as cooktops,

ovens, dishwashers, microwaves, sinks and taps. There are models to complement your
new Blanco rangehood. Blanco now has a range of laundry products to choose from.

Of course, we make e very eff ort to ensure that our products meet all your requirements, and
our Customer Service Department is at your disposal, to answer your questions and to
listen to your suggestions.

Please complete the warranty section of this manual and keep your receipt as proof of
purchase. Retain all documents relating to the purchase of Blanco product.

Blanco is committed to providing increasingly efficient products that are easy to use , respect
the environment and are attractive and reliable.

BLANCO

- 4 -

SAFETY WARNINGS

· Read the following carefully to avoid an electric shock or fire.

· It is most important that this instruction book should be retained with the appliance for future
reference.

· Should the appliance be sold or transferred, alwa ys ensure that the book is left with the appliance
in order that the new owner can get to know the functions of the appliance and the relevant
warnings.

· These warnings are provided in the interest of safety . You MUST read them carefully before installing
or using the appliance.

· All operations related to electrical wiring and installation must be carried out by qualified persons ,
in accordance with safety regulations.

· Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring
rules

· This appliance is not intended for use by y oung children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the appliance safely.

· Young children should be supervised to ensure that they do not play with the appliance.

· WARNING: If the surface is cracked, switch off the appliance to av oid the possibility of an electric
shock

· Metallic objects such as knives, f orks, spoons and lids should not be placed on the cooktop surface
since they can get hot.

· Do not spray aerosols in the vicinity of the appliance when it is in operation.

· Do not store or use flammable liquids or items in the vicinity of this appliance, e.g. aerosols.

· WARNING: Accessible parts will become hot when in use . To avoid burns and scalds children
should be kept away.

· Do not allow large cookware to overhang the cooktop onto the adjacent benchtop . This will cause
scorching to the benchtop surface.

· Before using the appliance, ensure that all packing materials are removed from the appliance.

· Only authorised personnel should carry out servicing.

· Always ensure the appliance is switched off before cleaning or replacing parts.

· To maintain safe operation, it is recommended that the product be inspected every five years by
an authorized service person.

· If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
similarly qualified person in order to avoid a hazard.

· Do not use a steam cleaner to clean this appliance.

· Do not turn on the heating zones if aluminium foils or plastic items have been placed on the
cooktop surface.

Before connecting the appliance to the electricity supply:

Check that the voltage and power values listed on the data plate (positioned on the lower part of the
appliance) are compatible with the electricity supply and socket. If you have an y doubts, please consult
a qualified electrician for assistance.

GENERAL

Carefully read the contents of this manual since it provides important instructions regarding safety of
installation, use and maintenance. Keep th e manual for possible future consultation. All the
operations relating to installation/replacement (electrical connections) must be carried out by
specialised personnel in conformity with the regulations in force.

IMPORTANT

Avoid spilling liquid, therefore to boil or heat liquids, reduce the heat.
Do not leave the heating elements on with empty pots and pans or without receptacles.
When you have finished cooking, switch off the relevant heating element.

INSTALLATION INSTRUCTIONS

These instructions address specialised installers and serve as a guide for installation, adjustment and
maintenance in conformity with the laws and regulations in force.

- 5 -

If a built-in oven or any other appliance that generates heat must be fitted directly under the glass­ceramic cooktop, COOKTOP MUST BE SUITABLY INSULA TED in such a wa y that the heat generated
by the oven, measured on the bottom right of the cooktop, does not exceed 60°C. Failure to respect
this precaution may determine improper functioning of the TOUCHCONTROL system.

POSITIONING (Fig.1)

20 mm

4 mm

25 mm

Dimension with frame

30 mm

40 mm

Dimension without frame

50

Min

490

53.5

50

Min

510

48

900

880

50

Min

490

53.5

50

Min

516

48

906

880

The domestic appliance is designed to be built into a worktop as illustrated in the specific figure. Apply
sealant around the entire perimeter (cut-out dimensions Fig.1B). Fix the domestic appliance on the
worktop by means of the 4 brackets pro vided, taking the thickness of the worktop into account (Fig.1A).
If the lower part of the appliance, after installation, is accessible via the lower part of the cabinet then it
is necessary to mount a separator panel respecting the distances indicated (Fig.1C). If the appliance
is installed with an oven underneath then the separator is not necessary.

A

B

C

Fig.1

- 6 -

ELECTRICAL CONNECTIONS (Fig.2)

4321

43

L3

L2

21

L1

L2

L1

4

4

220-240 V3~ H05V2V2-F 4G

220-240 V2~ H05V2V2-F 3G

4 432

44

44

N

32

32

L2

L1

LN

1

1

1

220-240 V~ H05V2V2-F 3G

N

L3

L1

L2

380-415 V2N~ H05V2V2-F 4G

380-415 V3N~ H05V2V2-F 5G

Before making the electrical connections, check that:

- the ground cable is 2 cm longer than the other cables;

- the system ratings meet the ratings indicated on the identification plate fixed on the lo wer part of the

worktop;

- the system is fitted with efficient earthing compliant to the laws and regulations in force.

Earthing is obligatory by law.
If the appliance is not fitted with a cable, use type:
"H05V2V2-F" for a power level of up to 6400 Watts, the cross-section of the cable should be at least 2.5
mm², or 4 mm² for greater power levels.
The appliance is designed for permanent connection to the electricity supply and should therefore be
fitted with an omnipolar switch which has a minimum opening of 3 mm between contacts. The switch
should be suitable for the charge indicated on the appliance data plate and must conform to all current
legislation (the yellow/green earth wire must not be interrupted by the switch).
The omnipolar switch must be easy to reach once the installation process has been completed.

USE AND MAINTENANCE

MAINTENANCE

Remove any residues of food and drops of grease from the cooking surface using the special scraper
supplied. (Fig.3)

Clean the heated area as thoroughly as possible using SIDOL, STAHLFIX or similar products and a
cloth/paper, then rinse with water and dry with a clean cloth.
Using the special scraper (optional) immediately remove any fragments of aluminium and plastic material
that have unintentionally melted on the heated cooking area or residues of sugar or food with a high
sugar content (Fig.3). In this way, any damage to the cooktop surface is prevented.
Under no circumstances use abrasive sponges or irritating chemical detergents such as ov en spra ys or
stain remov ers.

Fig.3

- 7 -

USE

Use the touch control system in the corresponding position relative to the individual cooking needs.
Keep in mind that the higher the number, the more heat that is produced.

FUNCTIONING (Fig.4)

11

7

2

1

3 4

9

10

NOTE: THE COOKTOP HAS A LOCK FUNCTION.

The Lock function blocks the functioning of the cooktop on selection. e.g.: if the function is activated
while the cooktop has one area switched on the programme remains blocked even if you try to switch
another area on. The same thing happens if the appliance is switched off and the function is activated;
the cooktop doesn’t switch on. To activate or deactivate it, hold a finger on the Key sensor for about two
seconds. The function is active when warning light (10) is switched on.

Press the ON/OFF 11 button to switch on the cooktop. F or 10 seconds the display will show a “0”. If no
cooking zone is switched on within 10 seconds, the cooktop will automatically switch off.

T o switch on the zone you intend to use, press the corresponding + or - button within 10 seconds. When
the + button is pressed the displa y will show power le vel 9, and when the - b utton is pressed it will show
power level 4. After this operation, adjust the temperature with the +/- buttons.
To switch off a zone, press the - button until “0” appears. The corresponding LED will s witch off after 10
seconds.
You can also switch off a zone by pressing simultaneously the + and - buttons.
To switch off the cooktop, press the ON/OFF button (11). If all of the zones are set to “0”, the cooktop
will switch off after 10 seconds.

If an object is placed on the cooktop control panel or any liquid is spilt (water , milk, etc.) the cooktop will
automatically switch off and the 10 symbol will light up.
If the cooktop features doub le cooking zones, s witch on the second zone by pressing the corresponding
9-7 symbol for 3 seconds. After switching on the second zone, adjust the temper ature with the +/­buttons.

SAUCEPANS.

It is recommended to use flat-bottom pans with a diameter equal to or slightly larger than that of the
heated area. Do not use pans with a rough base to prevent scratching the heat surface of the cooktop
(Fig.5).

- 8 -

We recommend the use of only Stainless Steel saucepans, which are flat based and e xcellent conductors
of heat, therefore shortening the cooking time and reacting to temperature changes more rapidly than
other cookware.
The use of cast iron, copper based and aluminium saucepans and pots is not recommended as these
can cause damage to the cooktop surface. The base of all cookware should be dry prior to placing on

the cooktop.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED
BY BREACHING THE ABOVE WARNINGS.

Fig.5

- 9 -

Blanco Contact Information.
NEW SOUTH WALES

Head Office, Sales & Marketing Office
104 V anessa Street
Kingsgrove NSW 2208
Telephone: [phone]
Facsimile: 02 9503 2810

NSW Showroom*
40 Ebley Street
Bondi Junction NSW 2022
Telephone: [phone]
Facsimile: 02 9386 1671

Service and Spare Parts
All General Whitegoods Service
Telephone: [phone]
Facsimile: 02 9756 1091

AUSTRALIAN CAPITAL TERRITORY
Service and Spare Parts

Detlevs Appliance & Electrical Care
1/88 Sheppard Street
Hume
ACT 2905
Telephone: [phone]
Facsimile: 02 6260 1035

VICTORIA
State Office and Showroom*

35 Centre Road
Scoresby VIC 3179
Telephone: [phone]
Facsimile: 03 8756 7907

Service and Spare Parts

Advantage Appliances
Telephone: [phone]
Facsimile: 03 9874 6917

QUEENSLAND
State Office and Showroom*

148 Robinson Road - East
Geebung
QLD 4034
Telephone: [phone]
Facsimile: 07 3265 6933

Service and Spare Parts

Endeavour Appliances
Telephone: [phone]
Facsimile: 07 3852 2465

Platinum Appliance Service
Telephone: [phone]
Facsimile: 07 3862 1114

Roshad (Gold Coast)
Telephone [phone]
Facsimile 07 5535 7407

SOUTH AUSTRALIA & NORTHERN TERRITORY
Agent and Sales Office

S C Lighting & Electrical Supplies
47 North Terrace
Hackney SA 5069
Telephone: [phone]
Facsimile: 08 8362 4591

Service and Spare Parts

Prestige Appliance Repair Centre
Telephone: [phone]
Facsimile: 08 8352 3044

WESTERN AUSTRALIA

1 Alvan Street
SUBIACO WA 6008

Telephone: [phone]
Facsimile: 08 9382 1622

Service and Spare Parts

Metropolitan Appliance Repairs
Telephone: [phone]
Facsimile: 08 9317 1296

TASMANIA
Agent and Sales Office

Mark Pearce Agencies
23 T ranmere Road
Howrah TAS 7018
Tel/Fax: [phone]

Service and Spare Parts

Electrical Equipment Service (Launceston)
Telephone: [phone]
Facsimile: 03 6339 4588

Baldocks Appliance Service (Hobart)

Telephone: [phone]
Facsimile: 03 6234 8134

BLANCO CUSTOMER SERVICE
1300 739 033

Website: www .meaappliances.com.au
* Contact Showrooms to confirm hours of business.

- 10 -

BLANCO COOKING PRODUCT WARRANTY

STATEMENT OF STANDARD

WARRANTY CONDITIONS

MEA0702

1. Subject to the “Statement of Standard W arranty

Conditions” this product is cov ered by the f ollowing
Warranty.

TWO (2) YEARS WARRANTY from date of
purchase, covering all parts and labour .

2. The appliance is warranted under normal

single family domestic installation and use, as
set out in the instruction manual, against
manufacturing defects for the Warranty periods
shown above.

3. Should service be required under this Warranty,

the purchaser should contact an approved BLANCO
Service Provider during their normal business
hours.

4. At no time does BLANCO/MEA ha v e liability for

any freight or transportation costs or for any damage
during transit or for any consequence of failure of
this appliance outside of the normal service area,
unless such limitation of liability is prohibited by
statute.

5. This Warranty excludes replacement of par ts

required due to normal wear and tear including light
globes.

6. This Warranty only applies, provided the

appliance has been used in accordance with the
manufacturer’s instructions and provided an
accident, misuse, neglect or abuse has not
damaged the appliance.

7. None of the above Warranties purport to ex-

clude, restrict or modify either the application or the
exercise of a right conferred by any applicable
Statute.

8. Please complete the details belo w, which should

be retained for future reference along with y our proof
of purchase:

Date of Purchase: ……………………...................

Model No: ……………………………………......….

Serial No: ………………………………………........

1. The Warranty only applies provided that the
appliance has been used in accordance with the
manufacturer’s instructions and provided that the
appliance has not been damaged by an accident,
misuse, neglect or abuse of any person other than
the manufacturer or BLANCO/Major Electrical
Appliances (“MEA”) or from faulty installation, mis­adjustment or tampering by unauthorised persons.

2. When a service inspection reveals the alleged
fault or faults are caused by incorrect operation,
contrary to the instruction manual, and otherwise
the appliance is in good order and working
condition, the purchaser shall be liable f or a service
fee charged by BLANCO/MEA or one of its’ Ser­vice Providers.

3. If the appliance is used in Commercial Appli­cations or for Rental purposes, a separate w arranty
of Twelve (12) months co vering all parts with Three
(3) months on the labour will apply.

4. Subject to the provisions of any applicable
statute this Warranty applies to the original retail
purchaser only and is not transferable.

5. Subject to the provisions of any applicable
statute, at no time does BLANCO/MEA hav e liabil­ity for freight, transport or travel costs outside normal
service areas.

6. None of the above Warranties purport to ex­clude, restrict or modify either the application or the
exercise of a right conferred by any applicable
statute.

7. Subject to any W arr anties implied b y statute ,
at no time will BLANCO/MEA or its’ Service
Providers be liable for any economic loss conse­quent upon the failure of the appliance.

8. This Warranty is only valid for major appli­ances imported and distributed by BLANCO/MEA,
purchased and used in Australia.

- 11 -

3LIP0150