BLANCO
FEATURED MODEL
S10-888R ?■ a 8" bowl depths
ADDITIONAL MODELS
510-888 Left side large bowl, 8” a 7” bowl depths
510-887 Left side large bowl, 10” a 8” bowl depths
510-887R Right side large bowl, 8” a 10” bowl depths
514-479 Left aide large bowl, 9” a 8” bowl depths
514-480 Right Side large bowl, 8” a 9" bowl depths
FEATURES
• 18 gaugo, 304 series stainless steel
• 18/10 chrome/nickel content
• Long-lasting, easy-to-clean, satin polished finish
• Rear drain placement
CODE/STANDARDS COMPLIANCE
ASME 112.19.3-00
lAPMO/UPC listed
OPTIONAL ACCESSORIES
Sink Grids: 220-991 (Formerly 510-901)
220-993 (Formerly 510-902)
Colanders: 215-651, 510-889
221 -027 (Formerly 508-803)
SINK SPECIFICATIONS
Platinum Series
BLANCOSUPREME™ 1-3/4 REVERSE BOWL Undermount
Model 510-888R
MODEL 510-888R
NOMINAL DIMENSIONS
MODEL OVERALL
510-888R 31-5/16x20-7/8 Template provided with 7
DXF cutout templates available on our web site.
202.5
CUTOUT
SIZE
approximate 1/8* reveal
382.5
BOWL DEPTH DRAIN
LEFT RIGHT DIAMETER
3-1/2
WARRANTY
Blanco America’s Platinum Series sinks feature a
“NO HASSLE” LIMITED LIFETIME WARRANTY to be
free of all manufacturing defects under normal use.
See our complete warranty for details.
While Blanco America endeavors to provide accurate
Information, aii dimensions are nominai, cannot be
guaranteed, and are subject to change or cancellation.
Blanco America assumes no responsibiiity for use of
superseded or voided specifications.
PRODUCT SPECIFICATION
Reverse bowl undermount sink to be 1-3/4
bowl design, 31-5/16" in length and 20-7/8" in
front-to-back depth. Sink to be made from 18
gauge, 304 series stainless steel, with 18/10
chrome/nickel content and satin polished
finish. Sink to feature rear drain placement.
Sink to be Blanco Model 510-888R, with large
bowl depth of 8" and small bowl depth of 7".
JOB INFORMATION
Job Name:
Contact:
__________
1 3/16"
1 3/16"
31 5/16"
minimum cabinet: 914.4
33"
Date Specified:
Specifier:
Contractor:
_____
BLANCO AMERICA
800.451.5782
www.blancoameriGa.Gom
© 2007 BLANCO AMERICA
04/07 SPEC-003