Blancett B3100 Specifications

Page 1

Flow Monitor

B3100 Series

DESCRIPTION

The B3100 Series flow monitor is a flexible, durable, easy-to-use platform for your flow metering applications. Our trusted flow metering technology now offers a new flow monitor with more options and features than ever before with the B3100 Series.

APPLICATIONS

The B3100 monitor is suitable for application in a wide variety of metering needs. A few of the more common industries are:

• Secondary oil recovery applications

• Remediation and reclamation

• Fracture/refracture

• Coal bed methane

• Regulatory compliance and environmental accountability

• Industrial chemicals

• Aggressive chemical processing applications

• Semiconductor manufacturing

• Fertilizer production and dispensing

• Pesticide manufacture

• Liquid batching and water cooling

FEATURES

• Explosion-proof according ATEX, IECEx, FM and CSA c-us

• Rugged 1 in. NPT thread for flow meter mounting

• Data logging to survey information

• USB communication for configuration using a programming cable

• Modbus RS485 communication option.

• Easy configuration via PC with free downloadable software

• Easy K-factor and engineering unit configuration for volumetric or mass readings

• Display shows flow rate, total, measuring units and a flow rate indicating speedometer

• Seven-digit flow rate/total and 11-digit accumulated total

• Easy configuration with clear alphanumerical display

• Bright LED backlight

• Auto backup of settings and running totals

• Power requirements: Loop powered or battery

• Operational temperature – 40…158° F (– 40…70° C)

• Sixteen-point linearization of the flow curve, with interpolation

• Field operation via through-the-glass keypad

PART NUMBER CONSTRUCTION

Blancett B3100 Display -

Model

Blancett B3100 Display B31

Model

Explosion Proof* – Battery & Loop Power

Mounting

Meter M

Units of Measure

Customer Selectable CS

*For hazardous locations, the monitor must be installed on an explosion-proof rated meter. To maintain compliance, kit P/N B280-757 for meter mounting is required.

DSY-DS-02303-EN-01 (April 2017)

Product Data Sheet

Page 2

Specications

SPECIFICATIONS

Dimensions Ø 2.56 × 1.77 in. (65 × 45 mm)

Display

Ambient Operating Temperature

Enclosure

Power Requirements

Sensor Excitation

Terminal Connections Removable plug-in terminal strip; Wire max. 1.5 mm2 and 2.5 mm

Data Protection

Hazardous Area CSA c-us / FM

Directives and Standards

Input

Digital Output

Analog Output

Communication

Digits Seven 0.47 in. (12 mm) and eleven 0.28 in. (7 mm) digits. Various symbols and measuring units Refresh rate User definable: 8 times/sec – 30 sec Speedometer To indicate the actual flow rate, the bar graph range is 0…100% in 20 blocks, each block is 5%

– 40…158° F (– 40…70° C)

Sealing Silicone Control keys Three infra-red keys with operation through-the-glass front window Rating NEMA 4×, NEMA 7, NEMA 8, NEMA 9, IP66, IP67 Type Die-cast aluminum Ex d enclosure Dimensions 4.41 × 5.24 × 5.83 in. (112 × 133 × 148 mm) W × H × D Entry thread 2 × 3/4 in. NPT (T1), 1 × 1 in. NPT (T2) Battery powered

Loop powered

Long life Lithium battery; lifetime depends on settings and configuration; Up to approx. 3 years NOTE: The battery can power the backlight for a short time after a keypad touch Loop powered, analog output; 11…27V DC; Minimum 3.5 mA

NOTE: The loop powered analog output cannot power the backlight Power supply 9…27V DC; Consumption max. 3W All power sources

Terminal S3: 3V DC for pulse signals and 1.2 V DC for coil pickup, I

EEPROM backup of all settings; Backup of running totals every minute; Data retention is 10 years Configuration settings can be password protected

Class I, Division 1, Grps A, B, C, D

Class II/III, Division 1, Grps E, F, G

Class I, Zone 1, AEx d IIC T6/T5 Gb

Zone 21, Aex tb IIIC T85°C/T100°C Db EMC EN 61326-1; FCC 47 CFR part 15 LVD EN/IEC 61010-1 ATEX / IECEx EN/IEC 60079-0; EN/IEC 60079-1; EN/IEC 60079-31 CSA CSA 22.2 No. 25, CSA 22.2 No. 30, No. 61010-1-12 RoHS EN 50581 IP & TYPE EN 60529; NEMA 250 FM Class 3600, 3615, 3616, 3810 UL UL 61010-1 Pulse Flow Meter

Frequency

Coil / sine wave (COIL-HI: 20 mVpp or COIL-LO: 90 mVpp sensitivity selectable), NPN, PNP, reed

switch, NAMUR, active pulse signals 8 or 24V DC

Min. 0 Hz, max. 10k Hz for total and flow rate; Maximum frequency depends on signal type and

internal low-pass filter; For example, a reed switch with low-pass filter: max. frequency 120 Hz K-Factor 0.000010…9,999,999 with variable decimal position Low-pass filter Available for all pulse signals External reset total Pulse Transmitting linearized accumulated total Frequency 500 Hz max; Pulse length user-definable from 1 msec to 10 sec One passive transistor output (NPN), not isolated; 300 mA to 50V @ 77° F (25° C) General Transmitting linearized flow rate Galvanically isolated, loop powered 4…20 mA output

Accuracy

12 bit; Error 0.03% @ 68° F (typical 25 ppm/°F); analog output signal can be scaled to

any desired range Reading display information, reading/writing all configuration settings and data log extraction Modbus RTU, RS485 2-wire, bus termination without resistor for low power solutions Addressing Maximum 247 addresses Baud rate 1200, 2400, 4800, 9600, 19K2, 38K4

max. 100 μA

out

DSY-DS-02303-EN-01Page 2 April 2017

Page 3

SPECIFICATIONS CONTINUED

Function

Data Logging

Operational

Interval logs

Daily logs Configurable time once/twice per day or disable; Max 600 daily logs

Event logs

Extraction Via USB (CU) or Modbus communications or USB programming cable

Displayed information

Total Digits 7 digits Total Units L, m3 US gal, igal, cf, il bbl, kg, ton, US ton, lb or none Total Decimals 0, 1, 2, or 3 NOTE: Total can be reset to zero. Accumulated Total Digits 11 digits Accumulated Total Units/ Decimals Flow Rate Digits 7 digits Flow Rate Units mL, L, m3, mg, g, kg, ton, US ton, US gal, igal, Oil bbl, lb, cf, rev, none, scf, nm3, nL or p Bar graph Speedometer 20 blocks,; each block is 5% of total span Flow Rate Decimals 0, 1, 2, or 3 Flow Rate Time Units sec, min, hr, day

Specications (continued)

Records process data over time with real time clock Each log contains flow rate, total, accumulated total, time/date stamp and log number Every: 1 min, 5 min, 10 min, 15 min, 30 min, 1 hr, 2 hr, 3 hr, 4 hr, 6 hr, 8 hr or disable Max 1500 interval logs

When settings change (manual/Modbus) restart/power failure, factory reset, cleared total or error event; Max 724 event logs

Linearized flow rate and/or total; Linearized total and accumulated total; Indicating speedometer for flow rate; Total can be reset to zero

According to selection for total NOTE: Accumulated total cannot be reset to zero.

ACCESSORIES

Part Number Description

B280-757 Explosion-proof Meter Mount Kit, 1 in. connections

B310001 USB Programming Cable

B310010 Wall Mounting Kit

B310011 Pipe Mounting Kit (requires wall mounting kit)

B310028 Replacement Battery

DIMENSIONS

4.41 in.

(112 mm)

5.24 in.

(133 mm)

5.83 in.

(148 mm)

2 × Entry Thread T1

Entry Thread T2

DSY-DS-02303-EN-01 Page 3 April 2017

Page 4

Flow Monitor, B3100 Series

Control. Manage. Optimize.

Blancett is a registered trademark of Badger Meter, Inc. Other trademarks appearing in this document are the property of their respective entities. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specications without notice, except to the extent an outstanding contractual obligation exists. © 2017 Badger Meter, Inc. All rights reserved.

www.badgermeter.com

Blancett B3100 Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual