Turbine Flow Meter Solutions
Rugged, Accurate
and Reliable.
Turbine Flow Meter Solutions
Accurate, Consistent, Reliable and Informative
Badger Meter offers the Blancett® family of turbine flow meters to measure
everything from water in hydraulic fracturing and mining operations, to
gases and liquids from wellheads to sanitary environments. Our turbine
meters deliver accurate, consistent, reliable and informative flow
measurements for both liquid and gas applications.
Blancett turbine meters are also cost-effective and easy to repair. Field
repair kits (not available for the B1500 meters) are also compatible with
turbine meter models of several manufacturers. Both complete meters and
repair kits receive a five-point NIST traceable calibration at the factory.
Additional calibrations are available to achieve a higher accuracy rating or
to custom-calibrate for a specific viscosity. The B1500 meters receive a
10-point NIST traceable calibration.
To complete your flow metering needs, Badger Meter provides a full line of
cost effective flow monitors to fit a variety of application constraints
including hazardous area locations, pulse and network communications
and a variety of mounting options. The flow monitors are designed to be
used with Blancett flow meters, but can be used with almost any flow meter
producing a low amplitude AC output.
Industries Served
• Petrochemical
• Oil and Gas
• Food and Beverage
• Semiconductor
• Irrigation
• Chemical
• Industrial
• Refining
The Blancett family is offered with an assortment of accessories that deliver
output signals to suit the inputs required by data acquisition or control
systems. Available accessories include turbine meter pickups, frequency-toanalog transmitters and frequency-to-square wave transmitters.
Committed to fast deliveries, Badger Meter maintains a factory lead time
of five days for standard Blancett configurations. Expedite options are
also available.
2
Turbine Meters
Blancett® turbine flow meters are available in sizes from 1/4…10 inches (6.35…254 millimeters). The meters are
compatible with Blancett accessories and support various mounting styles.
With accuracies ranging from ±0.25…1 percent of reading, repeatability ranging from 0.02…0.1 percent and
stainless steel body construction, Blancett turbine meters provide precision measurements while being resistant
to most chemicals. These meters are used to measure a wide range of liquids, including water, process water,
chemicals and refined fuels.
Size
in. (mm)
Flow Rate
gpm (lpm)
Accuracy
Repeatability
End Fittings
Application
1100
Versatile
1/2…10
(13…254)
0.6…5000
(2.27…18,927)
Up to ±1%
of reading
±0.1% ±0.02% ±0.1% ±0.5% ±0.1% ±0.1%
NPT, BSP,
Victaulic,
flange, grayloc,
hose-barbed
Oil Fields
Water Flood
B1500
High Accuracy
1/4…2
(6.35…50.8)
0.25…250
(0.94…946)
Up to ±0.25%
with B3000
linearization
±0.5% with
single K-factor
NPT, flange Wafer Tri-clamp NPT
General
Industries
(2.27…18,927)
QuikSert®
Liquid Gas
1…10
(25.4…254)
0.6…5000
Up to ±1%
of reading
Oil Fields Flare Gas
2 (50.8)
7…350
ACFM
Up to ±2% of
reading
FloClean
Sanitary
1…3
(25.4…76.2)
0.6…400
(2.27…1514)
Up to ±1%
of reading
Food and
Beverage
1200 Corrosive
Environment
1/4…3/4
(6.35…19)
0.25…25
(6.35…635)
Up to ±1%
of reading
Petrochemical
3