Blakeglow Aiphone GH-1AD, Aiphone GH-1KD User Instructions

Aiphone GH

User Instructions

Blakeglow Ltd
Unit A4
Hastingwood Trading Estate
35 Harbet Road
London N18 3HT

Tel : [phone]
Fax : [phone]
Email [e-mail]
Web www.blakeglow.com

July 2008 issue 1

2

WELCOME

Congratulations on choosing a home fitted with a Blakeglow system.

This Owner's Guide is designed to help you get the most from your system.

For the latest product and technical information please visit our website:
www.blakeglow.com

Push buttons and adjustments are as follows.

Residential station (GH-1AD, GH-1KD)

[1] Speaker
[2] Microphone
[3] Door release button /
Monitor button (GH-1KD
only)
[4] Talk button
[5] Light button / Security
guard station call button
[6] Service button (option)
[7] Talk LED
[8] Call tone off LED
[9] Receive volume control
[10] Call tone volume
control
[11] Video monitor 3.5 inch
color LCD
[12] Monitor brightness
control

3

Replying to a Call

1. When the call is from an entrance station or security
guard station, the call tone will ring at the residential
station for approximately 10 seconds. An image will
be displayed on monitor residential station.

2. On the residential station, press the talk button
within the set time (see 8-6, menu 5, 9-2, menu 4)
to respond and talk handsfree. The LED lights when
you talk, and goes off as you listen to the caller.

•

If you press the talk button for at least one second
while talking handsfree, a beep will be emitted and
you can communicate by press-to-talk
communication.

•

In press-to-talk communication, you press the talk
button to talk and release it to listen.

3. When you are done talking, press and hold down
the talk button.

* The communication will be ended automatically after
approximately 1 minute when handsfree communication
is used at the residential station or after approximately 3
minutes when a handset is used.

NOTE: When "call tone volume control" is put in MUTED position, "Call tone off
LED" on GH-1KD & GH-1AD and TALK LED on GH-1MD blinks at 5 second
intervals.

Door Release

1. Press the door release button while in communication.

2. The door release function will activate on the entrance
station that is in communication.

4

Your Visitors

Visitors may contact you from
the main entrance by calling you
on the door entry system by
dialling your apartment number
on the call panel

1. Direct Selection GH-SW
Press the call button for the
residence that you want to call.
You will hear a low-volume call
tone from the entrance station.

2. Digital name scrolling GH-NS
Display the resident name you
want to call and press the call
button. You will hear a low­volume call tone from the
entrance station.
a. Making a call by name
scrolling
b. Making a call by entering the
room number
c. Making a call by entering
letters and selecting the
corresponding name

NOTE: If you push a call button
that has been programmed to
activate a light, the entrance light
will turn on. (GH-SW only.)

Once the number has been di­alled into the call panel, the num­ber is displayed on the panel
readout. Should your visitor dial
the wrong number, then they can
reset and start again by pressing
the “R” button. unit.

R