Blade Stealth Conspiracy 220 Instruction Manual

Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni

®

2

EN

• Always keep a safe distance in all directions around your model
to avoid collisions or injury. This model is controlled by a radio
signal subject to interference from many sources outside your
control. Interference can cause momentary loss of control.

• Always operate your model in open spaces away from
full-size vehicles, traffi c and people.

• Always carefully follow the directions and warnings for
this and any optional support equipment (chargers, rechargeable
battery packs, etc.).

• Always keep all chemicals, small parts and anything electrical
out of the reach of children.

• Always avoid water exposure to all equipment not
specifi cally designed and protected for this purpose.
Moisture causes damage to electronics.

• Never place any portion of the model in your mouth as it could
cause serious injury or even death.

• Never operate your model with low transmitter batteries.

• Always keep aircraft in sight and under control.

• Always move the throttle fully down at rotor strike.

• Always use fully charged batteries.

• Always keep transmitter powered on while aircraft is powered.

• Always remove batteries before disassembly.

• Always keep moving parts clean.

• Always keep parts dry.

• Always let parts cool after use before touching.

• Always remove batteries after use.

• Never operate aircraft with damaged wiring.

• Never touch moving parts.

Age Recommendation: Not for children under 14 years. This is not a toy.

WARNING AGAINST COUNTERFEIT PRODUCTS: If you ever need to replace a Spektrum component found in a Horizon

Hobby product, always purchase from Horizon Hobby, LLC or a Horizon Hobby authorized dealer to ensure authentic high­quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility
and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology.

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic
mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the
product or other property. This product is not intended for use by children without direct adult supervision. Do not use with
incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This
manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and
warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

The following terms are used throughout the product literature to indicate various levels of potential harm when operating
this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no
possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility
of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and
serious injury OR create a high probability of superfi cial injury.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby,
LLC. For up-to-date product literature, visit www.horizonhobby.com and click on the support tab for this product.

Meaning of Special Language

Safety Precautions and Warnings

If you are operating this product in North America, you are required to have an Amateur Radio (HAM) license. Visit
www.arrl.org for more information.

This product uses Betafl ight Third Party Software in portions of its coding. For more information on Betafl ight Software, please visit:
https://github.com/betafl ight/betafl ight/wiki.

THIRD PARTY SOFTWARE: This product may include code developed by one or more third parties (“Third Party Software”). Some
Third Party Software may be subject to other terms and conditions that may be available for download with the product documentation.
Notwithstanding the terms and conditions of this Agreement, the Third Party Software is licensed to you subject to the terms and conditions
of the software license agreement identifi ed in the open source software disclosure. If the third party terms and conditions include licenses
that provide for the availability of source code (such as the GNU General Public License), the open source software disclosure or the media
on which the software may be delivered will provide instructions where a copy of such source code can be obtained.

3

EN

Table of Contents

Specifications

To receive product updates, special offers and more, register your product at www.bladehelis.com.

NOTICE: Consult local laws and ordinances before operating FPV (fi rst person view) equipment. In some areas, FPV operation
may be limited or prohibited. You are responsible for operating this product in a legal and responsible manner.

If you own this product, you may be required to register with the FAA.

For up-to-date information on how to register with the FAA, please visit https://registermyuas.faa.gov/.
For additional assistance on regulations and guidance on UAS usage, visit knowbeforeyoufl y.org/.

Box Contents:

• Stealth Conspiracy

®

BNF Basic Quadcopter

- Spektrum™ Quad Race Serial Receiver w/telemetry

- 30A BLHeli ESC

- Flight Controller

- 200mW Video Transmitter

- FPV Camera

Needed to Complete:

• DSM2®/DSMX® Compatible Transmitter

• 4S 1300mAh 35C LiPo Battery

• LiPo Compatible Battery Charger

• FPV Headset or Groundstation Monitor

Safety Precautions and Warnings .......................2

Table of Contents ...............................................3

First Flight Preparation .......................................4

Flying Checklist ..................................................4

Installing the Propellers ......................................4

Assembly ..........................................................4

Transmitter Setup ...............................................5

Installing the Flight Battery .................................5

Transmitter and Receiver Binding ........................6

Understanding the Primary Flight Controls ...........6

Using the Video Transmitter ................................7

Adjusting the FPV Camera Angle .........................7

Preparing for Flight ............................................8

Flight Mode and Rate Selection ...........................8

Flying the Stealth Conspiracy Quadcopter ............8

Post-Flight Inspection and Maintenance ..............8

Troubleshooting Guide ........................................9

Parts Explosion ................................................10

Parts Listings ...................................................10

Optional Parts ..................................................10

Limited Warranty ..............................................11

Warranty and Service Contact Information .........12

FCC Information ...............................................12

IC Information ..................................................12

Length

7 in (180mm)

Height

5.27 in (134mm)

Max Propeller Diameter

5 in (127mm)

Flying Weight

19.4 oz (550 g)

4

EN

First Flight Preparation

• Remove and inspect contents

• Begin charging the fl ight battery

• Assemble the aircraft

• Program your computer transmitter

• Install the fl ight battery in the aircraft
(once it has been fully charged)

• Bind your transmitter

• Familiarize yourself with the controls

• Find a suitable area for fl ying

Flying Checklist

❏ Always turn the transmitter on fi rst

❏ Plug the fl ight battery into the lead from the ESC
❏ Allow the ESC to initialize and arm properly
❏ Fly the model
❏ Land the model
❏ Unplug the fl ight battery from the ESC

❏ Always turn the transmitter off last

Installing the Propellers

CW

CW

CCW

CCW

Assembly

Assemble and Install the Optional Camera Mount

If you wish to use an additional camera to record your
fl ights, follow the directions below to assemble and
install the optional video camera mount.

1. Assemble the camera mount as shown (A).

Do not fully tighten the screws.

Use removable thread locking compound to
keep the screws from loosening due to vibration.

2. Remove the 8 screws holding the top plate to

the quadcopter (B).

3. Carefully lift the top plate away from the frame.

4. Position the tabs of the camera mount into the
slots in the top frame.

5. Using 4 screws and thread locking compound,
secure the camera mount through the bottom of
the top plate and into the bottom camera mount
standoffs (C).

6. Tighten all the screws in the camera mount.

7. Feed a hook and loop strap through the top plate
slots as shown (C).

8. Re-attach the top plate to the quadcopter frame
using thread locking compound and the 8
screws removed in step 2.

A

B

C

1. Refer to the illustration for the proper motor rotation and
propeller location.

2. The propellers have “CW” or “CCW” marked on one
blade to show proper location and rotation. Match the
propeller location to the illustration.

3. Secure the propellers using the provided lock nuts.
Do not overtighten the nuts as damage to the propellers
or motors may result.