Blade CG02+ 3-Axis Instruction Manual
®
CG02+ 3-Axis
Brushless Camera/Gimbal
Instruction Manual
Bedienungsanleitung
Manuel d’utilisation
Manuale di Istruzioni
2
EN
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product
before operating. Failure to operate the product correctly can result in damage to the product, personal
property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some
basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury
or damage to the product or other property. This product is not intended for use by children without direct adult
supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance.
It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or
use, in order to operate correctly and avoid damage or serious injury.
The following terms are used throughout the product literature to indicate various levels of potential harm
when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a
little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND
a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral
damage, and serious injury OR create a high probability of superfi cial injury.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of
Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for
this product.
Meaning of Special Language
Age Recommendation: Not for children under 14 years. This is not a toy.
3
EN
• Always keep a safe distance in all directions
around your model to avoid collisions or injury. This
model is controlled by a radio signal subject to interference from many sources outside your control.
Interference can cause momentary loss of control.
• Always operate your model in open spaces away
from full-size vehicles, traffi c and people.
• Always carefully follow the directions and warnings
for this and any optional support equipment
(chargers, rechargeable battery packs, etc.).
• Always keep all chemicals, small parts and anything electrical out of the reach of children.
• Always avoid water exposure to all equipment
not specifi cally designed and protected for this
purpose. Moisture causes damage to electronics.
• Never place any portion of the model in your mouth
as it could cause serious injury or even death.
• Never operate your model with low transmitter
batteries.
• Always keep the aircraft in sight and under control.
• Always move the throttle fully down at rotor strike.
• Always use fully charged batteries.
• Always keep the transmitter powered on while the
aircraft is powered.
• Always remove batteries before disassembly.
• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before touching.
• Always remove batteries after use.
• Never operate an aircraft with damaged wiring.
• Never touch moving parts.
Safety Precautions and Warnings
4
EN
Table of Contents
Box Contents
Box Contents ........................................................... 4
Technical Specifi cations ........................................... 5
Loading the CGO2 App to Your WiFi Smart Device ..... 5
Gimbal Components................................................. 6
Installing the Mounting Plate .................................... 7
Installing the Gimbal ................................................ 7
Routing the Wiring ................................................... 8
Connecting the Gimbal ............................................. 9
Transmitter Programming ...................................... 10
Using the Gimbal ................................................... 10
Using the CGO2 App ............................................... 11
LED Codes ............................................................ 11
Troubleshooting ..................................................... 12
Optional Parts ........................................................ 12
Limited Warranty ................................................... 14
Service Contact Information ................................... 16
FCC Information ..................................................... 16
IC Information ........................................................ 17
Compliance Information for the European Union ..... 17
A
D
CB
F
G
E
H
A. CG02+ 3-axis camera/gimbal
B. Chroma™ mounting plate
C. 350 QX3 mounting plate
D. (3) M2.5 x 10 mounting screws
E. 4 pin Y-harness
F. 3-wire signal lead (not used)
G. 2-wire power lead (not used)
H. 4-pin to servo harness (not used)
5
EN
Technical Specifi cations
Loading the CGO2 App to Your WiFi Smart Device
Dimensions LxWxH (with lens): 3.00 x 101.62 x 129.12mm
Weight: 163 g
Working Voltage: 12V
Wireless Frequency Range:
North America: 5745MHz–5825MHz**
Europe: 5180MHz–5240MHz**
Lens Sensor: 16M
Angle of view: 155°
Controlled Rotation Range: Pitch Axis Control: –90°–0°
Effective Pixels: 16 million
White Balance: Automatic
Focusing System: Fixed
Microphone Onboard
Storage Temperature: –20°–60°C
Working Temperature: 0°–50°C
• Download the free CGO2+ App to your smartphone or
tablet at the iTunes App Store or Google Play Store.
• Install the app to your WiFi capable device.
** IMPORTANT: Your WiFi capable device must operate in the same wireless frequency range as broadcast by the
product purchased in your region.
6
EN
Gimbal Components
Left side
Right side
Front
LEDMicrophone
Bottom
Camera lense
Mounting rails
WiFi antenna
Micro SD
card slot
12V gimbal
power port
PWM ports
Loading...