REMOTE START SECURITY SYSTEM
OWNERS MANUAL
Standard Features
The System has the following standard features:
• 5-button remote transmitter
• Status indicator (LED)
• Valet/Service mode switch
• Remote Start capabilities
• Extended Range Receiver
• Multi-tone siren (120dB)
• Dual stage impact detector
• Remote panic
• Valet mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Stop & Go Feature
• Auto Cold Start
• Flashing parking lights
• Auto Rearm
• Passive/Active Arming
Optional Features
Note: Some features may not be appropriate for
certain vehicles. Automatic tr
electronic fuel injection are required. on vehicles for
use with this system.
ansmission and
REMOTE TRANSMITTER FUNCTIONS
Button 1
Button 3
5-Button
Transmitter
Button 1 Arms the system and locks the
doors*. Button 1 also activates the Panic
feature.
Button 2
Button 5
Button 4
This System has many optional features that may
require additional parts and/or labor. Please contact
your dealer for more details.
• Remote keyless entry (Door lock/unlock)
• Illuminated entry
• LCD FM 2-way Remote
• Hood & trunk protection
• Horn honk
• Trunk/hatch release
• Window roll-up
• Back up battery
• Additional sensors: glass breakage/microwave
Button 2 Disarms the system and unlocks the
doors*.
Button 3 Activates the optional Trunk Release
feature*.
Button 4 Activates the Remote Start Feature.
Button 5 Auxiliary Shift Key.
Buttons 5 then 4 Activates the 2nd auxiliary
function.
* Optional Feature
1
Security System Operation
† If the Passive Locking feature was enabled during installation.
ARMING OPERATION
To arm the system press transmitter button 1:
DISARMING OPERATION
To disarm the system press transmitter button 2.
• The siren will chirp once.
• The parking lights will flash once.
• The doors will lock*.
• The L.E.D. will turn solid for 10 seconds
then start flashing slowly, the system is
now armed.
While the system is armed the alarm will
trigger if:
• A door is opened.
• The hood/trunk is opened*.
• The shock sensor detects an impact to the
vehicle.
When the alarm is triggered the siren will
sound, the parking lights will flash, and the horn
will honk*. If the alarm is triggered while the
remote start is engaged, the remote start will
immediately shut down.
TAMPER ALERT
If the alarm was triggered while away from the
vehicle, the siren will chirp 3 times on disarming for tamper indication. After disarming the
alarm, enter vehicle and turn ignition on. The
LED will flash the zone that was triggered 5
times (see LED chart).
PASSIVE ARMING
The passive arming feature allows the system to
arm automatically without user intervention.
This programmable feature may be enabled during
installation.
AUTO REARM
The Auto Rearm feature allows the system to
automatically re-arm itself in the event the
system is disarmed and ignition is not turned on
within 30 seconds.
To arm the system passively:
1. Turn the ignition key off.‡
2. Exit the vehicle and close all doors.
• The LED will start flashing rapidly to
indicate that the system is preparing to
arm. (The system can be armed at any
time by pressing transmitter button 1.)
NOTE: This programmable feature may be disabled
during installation. The Passive Arming feature and
Auto Rearm feature are related. In order to disable
the Auto Rearm feature, the Passive Arming feature
must also be disabled during installation. This
feature will not work on vehicles with the illuminated
entry feature enabled.
• The siren will chirp 30 seconds after
the last door is closed to indicate the
system is now armed.
• The doors will lock.†*
‡ The ignition must have been on for at least 10 seconds prior
to exiting the vehicle or Passive Arming will be bypassed.
SILENT ARMING/DISARMING
Press transmitter button 5 (the Shift Button)
then the Arm or Disarm button for one-time
silent operation.
• The siren will chirp twice.¥
• The parking lights will flash twice.¥
• The doors will unlock.†*
• The dome light will turn on for 30
seconds.*
If the alarm was triggered while away, the system will respond
¥
with 3 chirps and 3 parking light flashes.
† If the Passenger Unlock Feature is enabled, pressing the
unlock button will unlock only the driver's door. Pressing the
unlock button again unlocks all doors.
* Optional Feature
2
Loading...