Black Widow Security BW 852, 852 User Instructions

FULL FEATURED KEYLESS
ENTRY SYSTEM with Optional Starter Defeat

USER INSTRUCTIONS

Congratulations on the purchase of your keyless entry system.
Your system is designed, engineered, and assembled in the U.S.A.
using the latest state of the art technology.Your system is designed
to give you trouble free operation for years to come.The system
includes an LED, and override/valet switch, two remote controls
and the main control module.

Locking Operation: To lock the system. Press button 1 on the
remote.The LED will start slowly flashing. If the optional starter
defeat is installed, the starter will be disabled.

Unlocking Operation: Press button 2 on the remote.The LED
will stop flashing and the optional starter defeat will be
disengaged. If the optional two-step unlock feature is installed,
pressing button 2 will unlock only the driver’s door. Pressing
button 2 again within two seconds will unlock all remaining doors.

Illuminated Entry (Optional): When this optional feature is
installed, the vehicle’s interior lights will illuminate when you
unlock your system, and remain on for 30 seconds or until the
ignition is turned on.

Important Note: Some features described in this manual may not be
compatible with some vehicles, and may require extra parts and/or labor. See
your installer for details.

Passive Starter Defeat (Optional):If the optional starter defeat is
installed,your system can be programmed to automatically disable the
starter 45 seconds after turning off the ignition.The LED will double
flash and the vehicle’s starter will be disengaged as an extra measure
of security in the event the vehicle is mistakenly left unlocked.

Horn Output (optional): Your system can also be connected to
your vehicle’s horn.The horn will provide confirmation chirps when
you lock or unlock the system.

Remote Panic (Optional): If the optional horn honk output is
installed, pressing button 4 for three seconds will trigger the Panic
mode. The horn will honk and parking lights will flash for 30
seconds, or until button 4 is pressed again.

Ignition Trigger (Optional):After the system is remotely locked,
turning on the ignition before remotely unlocking the system
activates the ignition trigger feature. The horn will honk and the
parking lights will flash for 30 seconds. To deactivate the feature
once triggered, press button 4 on the transmitter or use the
override procedure (see below).

Overriding the System: If the optional starter defeat is installed
and your remote is lost or fails to operate, you can manually
override the starter defeat. Turn on the ignition, then press the
override/valet switch for two seconds. The starter defeat will
disengage and the system will enter valet mode.

Auxiliary Output (Optional): The auxiliary output may be used
to activate an optional feature such as trunk release. Press and hold
button 3 for three seconds to activate.

2