Aluminum Folding Motorcycle Carrier
Instructions for Part # AMC-400
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and
practice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
• Push the motorcycle up the carrier with a helper - Never ride a motorcycle onto the carrier!
• This carrier is designed to safely carrier 400 lbs
• Your hauling weight may be limited by your vehicle’s capacity to carry a load - Please check with
your dealer to nd out your vehicle’s carrying capacity
• Will not work with Class II or smaller receivers
• Some vehicles may require air shocks or heavier springs to stien up the suspension to prevent
sagging
• NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers
• NOT recommended for use with hitch adapters/extensions
DiscountRamps.com • 1-888-651-3431
Page 1Rev. 052318
Parts
A
B
C
D
Part Description Quantity
A Motorcycle Rack 1
B Ramp 1
C Hitch Bar 1
D Support Bracket 2
E M8x40 Bolts 4
F M8x20 Bolts 8
E F G H
I
K L
Part Description Quantity
G M8 Washer 4
H M8 Lock Nuts 12
I M10 8-1/2” Bolt 1
J M10 Nut 1
M6 Bolt & Nut Assembly
K
L Anti-Tilt Bracket Assembly 1
J
2
Tools Required
• 13mm wrench • 17mm wrench
Assembly
Step 1. Install the support brackets
(D) onto the hitch bar (C) on the outside of the welded brackets using the
eight M8x20 bolts (F). Leave the bolts
hand-tight.
DiscountRamps.com • 1-888-651-3431
Fig. 1
Page 2Rev. 052318