Blackstar Amplification 153100VA User Manual
USA / Canada
&
B
&
:
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
Follow all instructions.
4.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
Do not block any ventilation openings.
7.
8. Install in accordance with the manufacturer’s instructions.
9.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
10.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs,
11.
convenience receptacles, and the point where they exit from the apparatus.
12.
Only use attachments/accessories specied by the manufacturer.
13.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualied service personnel. Servicing is required when the
14.
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS,
DISCONNECT THE POWER-SUPPLY CORD PLUG FROM THE AC RECEPTACLE”.
“WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. THE APPARATUS SHALL
NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL NOT BE PLACED ON APPARATUS".
This symbol is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature
accompanying the appliance.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that
may be of sufcient magnitude to constitute a risk of electric shock
to persons.
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator
.
Canada-Industry Canada
This radio transmitter has been approved by Industry Canada.
This Class
device complies with Industry Canada
(s).
Operation is subject to the following two conditions.
(1)
this device may not cause interference and
this device must accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator
Industrie Canada
Le présent
eils radio exempts de licence.
tes
(1)
l’utilisateur de l’appareil doit accepter tout brouillage
le brouillage est susceptible d’en compromettre le fonctionnement.AVIS
RELATIFS À L’EXPOSITION
Cet
équipement est conforme aux limites d'exposition au rayonnement ISED établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à
distance minimale de 20 cm entre le radiateur et votre corps.
digital apparatus complies with Canadian standard
(IC)
appareil est conforme aux CNR d’Industrie Canada applicablesaux appar
l’appareil ne doit pas produire de brouillage, et
your body.
(IC)
RF
License
L’exploitation
exempt
(2)
your body.
est
autorisée
RSS
(2)
radioélectrique
ICES-003.
standard
aux deux conditions suivan
subi,
même si
This
une
USA / Canada
2
3
English
Warning!
Important safety information!
READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL
INSTRUCTIONS FOR FUTURE REFERENCE!
Follow all warnings and instructions marked on the product!
Danger! High internal operating voltages.
Do not open the equipment case. There are no user serviceable parts in this
equipment. Refer all servicing to qualied service personnel.
Clean only with a dry cloth.
Condensation can form on the inside of an amplier if it is moved from a cold
environment to a warmer location. Before switching the unit on, it is recommended
that the unit be allowed to reach room temperature.
Unauthorised modication of this equipment is expressly forbidden by Blackstar
Amplication Ltd.
Never push objects of any kind into ventilation slots on the equipment casing.
Do not expose this apparatus to rain, liquids or moisture of any type.
Do not place this product on an unstable trolley, stand or table. The product may
fall, causing serious damage to the product or to persons!
Do not cover or block ventilation slots or openings. This unit must only be used in
a well ventilated area and never switched on when it is within a poorly ventilated
space, such as a bookcase.
This product should not be placed near a source of heat such as a stove, radiator,
or another heat producing amplier.
Use only the supplied power cord which is compatible with the mains voltage supply
in your area.
Power supply cords should always be handled carefully and should be replaced if
damaged in any way.
Never break off the earth (ground) pin on the power supply cord.
The power supply cord should be unplugged when the unit is to be unused for long
periods of time.
An apparatus with Class I construction should be connected to a mains socket
outlet with a protective earthing connection.
The mains plug of the power supply cord should remain readily accessible.
Before the unit is switched on, the loudspeaker should be connected as described
in the handbook using the lead recommended by the manufacturer.
Always replace damaged fuses with the correct rating and type.
Never disconnect the protective mains earth connection.
High loudspeaker levels can cause permanent hearing damage. You should
therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear
hearing protection if continuously exposed to high levels.
If the product does not operate normally when the operating instructions are
followed, then refer the product to a qualied service engineer.
The U.S. Government's Occupational Safety and Health Administration (OSHA) has
specied the following permissible noise level exposures:
Duration Per Day In Hours Sound Level dBA, Slow Response
8 90
6 92
4 95
3 97
2 100
1½ 102
1 105
½ 110
¼ or less 115
According to OSHA, any exposure in excess of the above permissible limits could
result in some hearing loss.
Ear plug protectors in the ear canals or over the ears must be worn when operating
this amplication system in order to prevent a permanent hearing loss if exposure is
in excess of the limits as set forth above. To ensure against potentially dangerous
exposure to high sound pressure levels, it is recommended that all persons
exposed to equipment capable of producing high sound pressure levels such as
this amplication system be protected by hearing protectors while this unit is in
operation.
All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
English
4
5
English
Introduction
Thank you for purchasing this Blackstar Sonnet acoustic amplifier. Like all our
products, this amp is the result of countless hours of painstaking Research and
Development by our world-class design team. Based in Northampton (UK), the
Blackstar team are all experienced musicians themselves and the sole aim of the
development process is to provide guitarists with products which are the ultimate
tools for self-expression.
All Blackstar products are subjected to extensive laboratory and road testing to
ensure that they are truly uncompromising in terms of reliability, quality and above
all TONE.
The Sonnet 120 two channel design features a simple yet intuitive control set to
ensure you have the ultimate flexibility in shaping your acoustic tone. Please read
through this handbook carefully to ensure you get the maximum benefit from your
new Blackstar product.
If you like what you hear and want to find out more about the Blackstar range of
products please visit our website at www.blackstaramps.com.
Thanks!
The Blackstar Team
Features
The Sonnet 120 acoustic amplifier brings a simple control set with intuitive design
to give you the pinnacle of acoustic tone.
The preamp channels of the Sonnet 120 have been designed with your performance
in mind. Both channels feature a combination XLR / jack INPUT for microphone or
instrument use, PHANTOM +48V power, a PAD switch, full EQ and a dedicated
ANTI-FEEDBACK control to help suppress unwanted feedback. A PHASE switch is
also included which can help feedback control or alternatively be used for correcting
phase issues when using two signals from the same instrument.
The Sonnet 120 also features high quality digital REVERB on both channels, with
four reverb types and the ability to adjust the reverb tail via the REVERB TIME control
on the top panel.
H.P. FILTER (High Pass filter) and BRILLIANCE controls provide further control over
your tone, allowing you to sculpt how your acoustic guitar is amplified.
A USB connector allows for sending a processed output into a computer for
recording purposes and balanced XLR D.I. OUTPUTS also allow the signal to be
connected to external devices for practicing, recording or live use.
The MP3 / LINE IN jack allows you to connect your Sonnet 120 to a music device or
drum machine to play along to, or use the Bluetooth capability of the amp to make
connecting to an external device even easier.
English
6
7
Loading...