Black & Decker xt2030, xt2200, xt2040 User Manual

www.blackanddecker.eu

English 3
Italiano 7

Ελληνικά 12

6 3 2154

7

8

13

12

11

10

9

2

B

7

A

3

ENGLISH

Intended use

Your Black & Decker iron has been designed for ironing
garments made of linen, cotton, silk, wool and synthetic
materials. This product is intended for household use only.

Safety instructions

u Warning! When using mains-powered appliances, basic safety

precautions, including the following, should always be followed

to reduce the risk of re, electric shock and personal injury.

u Read all of this manual carefully before using the appliance.
u The intended use is described in this manual. The use of any

accessory or attachment or the performance of any operation
with this appliance other than those recommended in this

instruction manual may present a risk of personal injury.

u Retain this manual for future reference.

Using your appliance

u Always take care when using the appliance.
u Do not use the appliance outdoors.
u Do not operate the appliance if your hands are wet. Do not

operate the appliance if you are barefoot.

u Guide the power supply cord neatly so it does not hang

over the edge of a worktop and cannot be caught
accidentally or tripped over.

u Never pull the power supply cord to disconnect the plug

from the socket. Keep the power supply cord away from
heat, oil and sharp edges.

u If the power supply cord is damaged during use,

disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.

u Disconnect the appliance from the power supply when not

in use and before cleaning.

Safety of others

u This appliance is not intended for use by persons

(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for the their safety.

u Children should be supervised to ensure that they do not

play with the appliance.

After use

u Switch off, remove the plug from the socket and let the

appliance cool down before leaving it unattended and before
changing, cleaning or inspecting any parts of the appliance.

u When not in use, the appliance should be stored in a dry

place. Children should not have access to stored appliances.

Inspection and repairs

u Before use, check the appliance for damaged or defective

parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.

u Do not use the appliance if any part is damaged or defective.
u Have any damaged or defective parts repaired or replaced

by an authorised repair agent.

u Before use, check the power supply cord for signs of

damage, ageing and wear.

u Do not use the appliance if the power supply cord or

mains plug is damaged or defective.

u If the power supply cord or mains plug is damaged or

defective it must be repaired by an authorised repair agent
in order to avoid a hazard. Do not cut the power supply
cord and do not attempt to repair it yourself.

u Never attempt to remove or replace any parts other than

those specied in this manual.

Electrical safety

!

This product must be earthed. Always check that the

mains voltage corresponds to the voltage on the
rating plate.

Appliance plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (Class

1) appliances. Unmodied plugs and matching outlets will

reduce the risk of electric shock.

Extensioncables&class1product

u A 3 core cable must be used as your tool is earthed and of

class 1 construction.

u Up to 30m (100 ft) can be used without loss of power.
u This appliance is not intended for use by young or inrm

persons without supervision. Children must be supervised
to ensure they do not play with the appliance.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.

Additional safety instructions for irons

u Always route the cord carefully to avoid a tripping hazard.
u Do not use the appliance near water.
u Do not place the appliance near heat sources or directly

under cabinets. Do not use the appliance in the presence

of explosive or ammable materials.

u The lling aperture must not be opened during use.
u Steam may escape from the soleplate.
u Surfaces may be hot during use and during the cooldown

period.

u Set the temperature control dial to the min position before

plugging in or out.

4

ENGLISH

u Hold the appliance at an angle as shown.
u Fill the appliance with water using the beaker provided.
u Close the water tank cover.

Warning! Never ll above the maximum lling level (11).

Normal tap water can be used, but if you live in a hard water
area the use of distilled water is recommended. Do not use
chemically descaled water.

Use

Warning! Do not leave the appliance unattended while it is

connected to the power supply and during the cool down period.

Temperature setting

The required temperature setting depends on the garment
fabric.

u Adjust the temperature control dial (1) to the required

setting:

- • Synthetics

- •• Silk/wool

- ••• Cotton/Linen

If you are unsure of the bre content of a garment, start with a low

temperature setting and test on a small area (seam or inside hem).

If wrinkles remain, gradually increase the heat setting until you nd

the optimum setting.

Using as a dry iron

u Stand the appliance on its heel rest (13).
u Plug the appliance in and switch on.
u Set the steam control dial (4) to the no steam position (g. B).
u Adjust the temperature control dial (1) to the required setting.

The heating light (2) will switch off when the appliance has
reached the required temperature.

Using as a steam iron

u Fill the water tank as described above.
u Stand the appliance on its heel rest (13).
u Adjust the temperature control dial (1) to the required

steam setting.
The heating light (2) will switch on. When the heating light
switches off, the iron will be ready for use as a steam iron. The
heating light will regularly switch on and off whilst ironing.

u To create steam, set the steam control dial (4) to the

required steam position.

u Plug the appliance in and switch on.

Using the steam burst button

The steam burst feature can only be used whilst ironing on a
high temperature setting.

u Make sure that there is water in the tank and the

temperature control dial (1) is set to the steam position.

u Lift the appliance and press the steam burst button (5).

You may need to press a few times to activate the pump.

u Let the appliance cool down before leaving it unattended and

before cleaning or inspecting any parts of the appliance.

u The power supply cord should not touch the hot soleplate

during use or during the cool down period.

u Do not touch the soleplate until it has cooled down.
u Wait until the appliance has cooled down before emptying

the water tank as the water may still be hot.

u Do not immerse the appliance, cored set or plug in liquids
u Always disconnect the appliance from the supply before

lling, emptying, cleaning, or carrying out any

maintenance on the appliance.

u The plug must be removed from the socket-outlet before

the water reservoir is lled with water

u The iron must be used and rested on a stable surface
u The iron is not to be used if it has been dropped, if there

are visible signs of damage or if it is leaking.

Features

1. Temperature control dial

2. Heating light

3. Self-clean button

4. Steam control dial

5. Steam burst button

6. Spray button

7. Water tank cover

8. Spray nozzle

9. Soleplate

10. Water tank

11. Maximum lling level indicator

12. Cord storage

13. Heel rest

Beforerstuse

Cleaning the soleplate

u Make sure that the appliance is unplugged.
u Fill the appliance with water as described below.
u Use the self-clean system as described below. When

nished, wipe the soleplate and steam vents with a cloth.

Some parts of the appliance have been lightly greased and as
a result the appliance may smoke slightly when switched on

for the rst time. This will cease after a short while.

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Fillingthewatertank(g.A&B)

In order to be able to use the steam function or the spray

feature, you will rst need to ll the water tank with water.

u Make sure that the appliance is unplugged.
u Set the steam control dial (4) to the no steam position (g. B).
u Open the water tank cover (7).

5

ENGLISH

Using the spray button

The spray feature can be used at any temperature setting
when either steam or dry ironing.

u Make sure that there is water in the tank.
u Press the button (6) several times to activate the pump

while you are ironing.

Using the self-clean button

The self-clean function must be used before using the

appliance for the rst time and then regularly to remove scale.

u Fill the tank (10) to the maximum lling level (11).
u Set the temperature control dial (1) to the max position.
u Plug the appliance in and switch on.
u Allow the appliance to heat up until the heating light (2)

switches off and then on again.

u Unplug the appliance and hold it horizontally over the sink.
u Press the self-clean button (3).

Hot water and steam will come out of the vents. Impurities and
scale will be washed away.

u Move the iron backwards and forwards while this is

happening.

u Release the self-clean button.
u Stand the appliance upright on its heel.
u Plug the appliance in and switch on.
u Iron an old cloth or towel to dry the soleplate.

XT2040/XT2200/XT2200CP-Anti-drip

The appliance is tted with an anti-drip device to enhance

steaming and prevent drips of water from the soleplate.

Vertical steam

The appliance is capable of generating steam even when in
the vertical position. This function is especially useful for
refreshing clothes and curtains.

XT2200CP-Autoshut-off

If the appliance is not moved for 25-30 seconds whilst in the

horizontal position, the appliance will be shut off automatically.

If the appliance is not moved for 8-15 minutes whilst on its

heel, the appliance will be shut off automatically. The heating

light (2) will ash to show that the auto shut-off feature is

active. Move or gently shake the appliance to re-heat the
appliance.

Anti-calc

The appliance is tted with an anti-calc device to reduce

lime-scale build up in the steam chamber and extend the
product life.

Hints for optimum use

u Sort the articles to be ironed according to the fabric. Start

ironing with the fabrics requiring the lowest heat setting.

u The appliance can be used as a dry iron even if there is

water in the tank. Do not ll the tank with water if the

appliance is to be used as a dry iron for an extended period.

u Avoid ironing over zippers, rivets on jeans etc. as they will

scratch the soleplate.

Cleaning and storage

Warning! Before cleaning and storing, unplug the appliance
and allow it to cool down.

u Pour out any remaining water after each use by tilting the

appliance forward.

u Clean the body with a soft damp cloth.
u Wipe scale and other residues off the soleplate with a

damp cloth.

u Store in an upright position. The cord can be wound

around the cord storage (12).

Protectingtheenvironment

Z

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.

z

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at the

address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

6

ENGLISH

Technical data

  XT2030 XT2040 XT2200 XT2200CP

Input voltage VAC 230 230 230 230
Power input W 2000 2000 2200 2200
Weight kg 1.4 1.4 1.4 1.4

EC declaration of conformity

XT2030/XT2040/XT2200/XT2200CP

Black & Decker declares that these products conform to:

2006/95/EC, EN 60335

The undersigned is responsible for compilation of the technical

le and makes this declaration on behalf of Black & Decker.

_ Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG,

United Kingdom

1-7-2009

Guarantee

Black & Decker is condent of the quality of its products and

offers an outstanding guarantee. This guarantee statement is in

addition to and in no way prejudices your statutory rights. The

guarantee is valid within the territories of the Member States of

the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24
months from the date of purchase, Black & Decker guarantees

to replace defective parts, repair products subjected to fair

wear and tear or replace such products to ensure minimum
inconvenience to the customer unless:

u The product has been used for trade, professional or hire

purposes;

u The product has been subjected to misuse or neglect;
u The product has sustained damage through foreign

objects, substances or accidents;

u Repairs have been attempted by persons other than

authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can check
the location of your nearest authorised repair agent by contacting

your local Black & Decker ofce at the address indicated in this

manual. Alternatively, a list of authorised Black & Decker repair
agents and full details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com

Please register at our website www.blackanddecker.co.uk to
be kept up to date on new products and special offers. Further
information on the Black & Decker brand and our range of
products is available at www.blackanddecker.co.uk