Black & Decker Workmate 200, Workmate 300, 79-033, 79-032 Instruction Manual

BLACK&DECKER,.

Instruction Manual

Workmate® 200 Workmate® 300
Work Center

79-032





Work Center

79-033

Welcome to
Black & Decker's

wonderful world of

Workmate® Work Centers.

If you already own a Black & Decker
Product, you know the pleasures a high
quality, high performance product can
deliver.

Your new Workmate® Work Center
is a quality piece of equipment that has
been carefully designed and
manufactured to provide years of
dependable service.

This instruction manual will

familiarize you with the Work Center. It

lists important facts and features which
describe the Work Center's construction

and basic working techniques.

So take a few minutes and

thoroughly read this manual. Complete

BLACK&DECKER..

set-up and application instructions are
included. Only by being totally aware of
what the Work Center can do will you be
able to put it to the numerous tasks that it
is capable of performing.

Rules we've provided for your protection.

mate® Work Center, and the more you
know about it, and its capabilities, the
happier you'll be with it.

Decker.

owner's registration card.

Pay particular attention to the Safety

We want you to enjoy your Work-

Thank you for selecting Black &

And don't forget to send in your

2

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS

Do not load with more than 350 pounds.

1.
Do not apply an unbalanced load which could cause the

2.
Work Center to tip over.

Do not use the Work Center as a step-ladder or standing

3.

platform. Do not use the lower platform as a step when the

Work Center is in Workbench" position.
Do not store Work Center outdoors or in a damp location.

4.
Avoid applying excessive force when clamping with the

5.
swivel grips.

Be sure that the legs are fully open and be sure that the table

6.
locks in the sawhorse position.

When using a power tool with the Work Center, follow the

7.
safety instructions in the tool's Instruction Manual.

Always wear safety glasses when operating power tools.

8.
See "Using Power Equipment" in this manual for correct

9.

method of securing power tools in the Work Center. Never
mount power tools directly in vise jaws; pressure may

damage tools.
An even pressure of the vise jaws on the work piece is

10.
essential. Tighten both vise jaws uniformly.

When assembling your Work Center, use only the Special

11.

Plastic Wrench provided. Use of other wrenches or sockets

can damage your Work Center.

fi

zz

~/A

-

350 11

SAVE THESE INSTRUCTIONS FOR FUTURE USE.

3