Black & Decker TROSOS1500C User Manual

Accessories/Parts (USA/Canada) Accessoires/Pièces (É.-U./Canada 1-800-738-0245

Please Read and Save this Use and Care Book Veuillez lire et conserver ce guide d’entretien et d’utilisation

™

†

U N D E R - T H E - C A B I N E T

TOASTER OVEN

FOUR DE GRILLE-PAIN

ACCROCHABLE

Model Modèle

❑

TROS1500C

USA/Canada 1-800-231-9786

www.prodprotect.com/applica

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

❑

Read all instructions.

❑

Do not touch hot surfaces. Use handles or knobs.

❑

To protect against electrical shock do not immerse cord, plugs or appliance in water or other liquid.

❑

Close supervision is necessary when any appliance is used by or near children.

❑

Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

❑

Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility or for examination, repair or adjustment. Or, call the appropriate toll-free number on the cover of this manual.

❑

The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

❑

Do not use outdoors.

❑

Do not let cord hang over edge of table or counter, or touch hot surfaces.

❑

Do not place on or near a hot gas or electric burner, or in a heated oven.

❑

Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.

❑

To disconnect, turn any control to OFF (0), then remove plug from wall outlet.

❑

Do not use appliance for other than intended use.

❑

Oversized foods or metal utensils must not be inserted in a toaster-oven as they may create a fire or risk of electric shock.

❑

A fire may occur if toaster-oven is covered or touching flammable material, including curtains, draperies, walls and the like, when in operation. Do not store any item on top of the appliance when in operation.

❑

Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts involving a risk of electric shock.

❑

Extreme caution must be exercised when using containers constructed of other than metal or glass.

❑

Do not store any materials, other than the manufacturer’s recommended accessories, in this oven when not in use.

❑

Do not place any of the following materials in the oven: paper, cardboard, plastic and the like.

❑

Do not cover crumb tray or any part of the oven with metal foil. This will cause overheating of the oven.

❑

To reduce the risk of fire, do not place any heating or cooking appliance beneath the appliance.

❑

To reduce the risk of fire, do not mount unit over or near any portion of a heating or cooking appliance.

❑

To reduce the risk of electric shock, do not mount over a sink.

❑

To reduce the risk of fire, do not store anything directly on top of the appliance surface when the appliance is in operation.

❑

Do not allow cord(s) to contact rear surface of toaster oven.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

Product may vary slightly from what is illustrated.

GROUNDED PLUG

As a safety feature, this product is equipped with a grounded plug, which will only fit into a three-prong outlet. Do not attempt to defeat this safety feature. Improper connection of the grounding conductor may result in the risk of electric shock. Consult a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

TAMPER-RESISTANT SCREW Warning: This appliance is equipped with a tamper-resistant screw to prevent

removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

a) A short power-supply cord (or detachable power-supply cord) is to be provided

to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

b) Longer detachable power-supply cords or extension cords are available and

may be used if care is exercised in their use.

c) If a long detachable power-supply cord or extension cord is used,

1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,

2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and

3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center.

† 1. Mounting hood / deflector (Part # TROS1500-01 (silver))

2. Mounted unit † 3. Temperature selector (Part # TROS1500B-02 (black), TROS1500-02 (gray)) † 4. Cooking function selector (Part # TROS1500B-03 (black), TROS1500-03 (gray))

5. Power ON indicator light † 6. TOAST / TIMER selector (Part # TROS1500B-04 (black), TROS1500-04 (gray))

7. Dropdown crumb tray

8. Rack slots (both sides) † 9. Slide rack (Part # TROS1500-05)

10. Cord management hook (not shown) Note: † indicates consumer replaceable/removable parts



















CONTROL PANEL

1. Temperature selector

2. Cooking function selector

3. Power ON (I) indicator light

4. TOAST / TIMER selector Important: When making toast or using the TIMER function, always turn the dial past

10 and then immediately turn back or forward to desired setting.

† 1. Mounting Parts (Part # SDC-MOUNTING KIT)

A. 16 Spacers 4 ½" 4 ¼" 4

/16"

B. 12 Screws 4 1" 4 1½" 4 2¼"

C. 4 Washers

2. Mounting Template (in box) You will also need:

• Tape

• Ruler (or you may cut out the ruler provided on the template)

• Electric drill with a ¼” drill bit









STANDARD INSTALLATION (FLAT CABINET) Important: Always wear protective glasses or goggles to prevent injury when

drilling.

1. Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2. Clean both the underside and topside of the bottom panel of the cabinet.

3. With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

4. Fold the template along the edge of your cabinet so the thick line is straight with bottom front edge; pull template tight and tape down to hold in place.

5. Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

6. Once holes are drilled, remove tape and mounting template.

7. Wipe dust and debris off the topside and underside of the cabinet surface.

8. Place a washer inside the cabinet over each of the 4 holes you drilled.

GETTING STARTED

• Remove all packing material, labels and any stickers.

• Remove and save literature.

• Unpack mounting parts and set them aside in a safe place where they will not roll away or get lost.

Important: Do not attempt to operate appliance until it is properly installed. CHOOSE A LOCATION

When choosing your location, consider the following:

• DO make sure to mount within reach of an electrical outlet.

• DO consider your normal work patterns in the kitchen when choosing location.

• DO NOT mount over any heating or cooking appliance such as your range or oven.

• DO NOT mount over or near a sink.

• DO NOT mount under, in front of or behind any under-cabinet light fixtures.

Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling.

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!

Caution: When selecting a location for your toaster oven, make sure you have adequate room to reach the Rear Receptacle.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-

Plug™ outlet, make sure you can easily unplug the appliance after each use.

DETERMINE CABINET TYPE

Prior to taping the mounting template and beginning to drill your holes, determine if your cabinet has a flat bottom (B) or an overhang molding (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has an overhang molding, refer to OVERHANG MOLDING INSTALLATION.

14. Plug into standard electrical outlet. Extra cord can be hung over cord

management hook behind unit (H).

Warning: Risk of electrical shock and fire. Do not allow cord to touch rear surface of oven.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-

Plug™ outlet, make sure you can easily unplug the appliance after each use.

12. Your †SpaceMaker™ appliance is now ready for use!

OVERHANG MOLDING INSTALLATION For cabinets with an overhang molding (see Illustration C) Important: Always wear protective glasses or goggles to prevent injury when

drilling. Note: Spacers are provided in case your cabinet has an overhang molding at the

front edge. Only use spacers on the rear screws of the appliance to ensure it is level with the front.

1. Clear countertop under installation area to avoid getting on other appliances or items. Open cabinets and remove contents to make mounting easier.

2. Clean both the underside and topside of the bottom panel of the cabinet.

3. Using a ruler, measure the thickness of the overhang molding (J), accurately noting the number for use in the following step.

Note: If you do not have a ruler, you may cut out the paper ruler provided on the edge of your mounting template.

9. Hold hood in place, aligning front of hood with front edge of cabinet; drilled holes on cabinet should be aligned with mounting holes on the hood.

10. Drop one of your screws through each of the washers covering the holes in the cabinet, from inside the cabinet down.

Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut.

11. Screwing from inside the cabinet down into holes, tighten 4 screws in place to secure hood to cabinet.

Note: Always tighten screws to ensure the appliance does not move or shake during operation.

12. After the hood is secured, lift the toaster oven up to mount. Hook the mounting tabs on the back of the oven over the mounting hooks at the back of the hood

(F).

Important: Do not put mounting hooks on hood through the mounting tabs on the oven. You must hook the tabs up and over the hooks to properly hold.

13. Once the back hooks are secure, hook your fingers around the feet on the front of the toaster oven (G). Pull forward and push up on the feet at the same time to engage the front hooks.

12. Now, use your ruler or the paper ruler provided to measure the overhang molding height, placing your ruler vertically against the underside of the cabinet behind the overhang molding. This number determines the number of spacers you need, using a number of spacers equal to the overhang molding height. For example, a 1” overhang molding would use 2, ½” spacers on each of the rear holes (M).

13. Drop one of your screws through each of the washers covering the holes in the cabinet, from inside the cabinet down.

Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut.

14. Place the appropriate number of spacers determined in step 12 on both of the rear screws so the appliance will be even (N).

Note: If the height of your overhang molding is too tall to be accommodated by the number of spacers provided, you may call, toll-free, at 1-800-231-9786 to order additional spacers at no charge.

Note: For spacer installation, you may require assistance in order to hold spacers in place while securing the appliance at the same time. If assistance is not available, use a small clamp to hold the spacers in place while you position the appliance.

15. Once spacers are set, hold hood up and tighten screws to secure. Screw from inside the cabinet down.

Note: Always tighten screws to ensure the appliance does not move or shake during operation.

4. After measuring the overhang molding thickness as shown in Illustration J, look

at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of ½”, you will use the ½” dashed line on the template.

5. Fold the template along the dashed line that matches the thickness of your overhang molding.

6. Place the folded template against the back edge of the overhang molding, making sure the side with the drill hole marks is facing down (K).

7. Making sure to keep the fold line straight against the back edge of the

overhang molding, tape the template securely in place.

8. Drilling from underside of the cabinet up, drill holes through the 4 places

marked on the template using a ¼-inch drill bit (L).

9. Once holes are drilled, remove tape and mounting template.

10. Wipe dust and debris off the topside and underside of the cabinet surface.

11. Place a washer inside the cabinet over each of the 4 holes you drilled.

How to Use

This appliance is for household use only.

GETTING STARTED

• Please go to www.prodprotect.com/applica to register your warranty.

• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.

• Wipe outside of appliance with a damp cloth; dry thoroughly.

• Insert slide rack.

• Remove tie from cord and unwind.

• Remove tag from plug.

• Plug unit into electrical outlet.

Caution: This oven gets hot. When in use, always use oven mitts or potholders when touching any outer or inner surface of the oven (P).

Note: During first few minutes of use you may notice smoke and a slight odor. This is

normal and should cause no concern.

HELPFUL HINTS ABOUT YOUR OVEN

• When oven is in operation, green light will come on and remain illuminated until oven is turned off manually or automatically when timer has been used.

• When selecting baking time for a particular product or recipe, include preheat time – normally 8 to 10 minutes.

• This oven has a 30-minute timer.

• Metal, ovenproof glass and ceramic bakeware without lids can be used in the oven.

• If foods require covering, use aluminum foil.

16. After the hood is secured, lift the toaster oven up to mount. Hook the mounting tabs on the back of the oven over the mounting hooks at the back of the hood (see Illustration F).

17. Once the back hooks are secure, hook your fingers around the feet on the front of the toaster oven (see Illustration G). Pull forward and push up on the feet at the same time to engage the front hooks.

18. Plug into standard electrical outlet. Extra cord can be hung over cord management hook behind unit (see Illustration H).

Warning: Risk of electrical shock and fire. Do not allow cord to touch rear surface of oven.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-

Plug™ outlet, make sure you can easily unplug the appliance after each use.

19. Your †SpaceMaker™ appliance is now ready for use!

+ 17 hidden pages