Black & Decker TROS1500B User Manual

USA/Canada 1-800-231-9786 Mexico 01-800-714-2503
www.prodprotect.com/applica
Accessories/Parts (USA/Canada) Accesorios/Partes (EE.UU/Canadá) 1-800-738-0245
Please Read and Save this Use and Care Book Por favor lea este instructivo antes de usar el producto
UN DE R- TH E- CA BI NE T
TOASTER OVEN
HORNO TOSTADOR
PARA INSTALAR DEBAJO DEL GABINETE
Register your product online at www.prodprotect.com/applica, for
a chance to WIN $100,000!
For US residents only
Registre su producto por Internet en www.prodprotect.com/applica y
tendrá la oportunidad de GANAR $100,000!
Solamente para residentes de EE.UU
Models Modelos
TROS1500
TROS1500B
2
1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electrical shock do not immerse cord, plugs or appliance in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility or for examination, repair or adjustment. Or, call the appropriate toll-free number on the cover of this manual.
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
To disconnect, turn any control to OFF, then remove plug from wall outlet.
Do not use appliance for other than intended use.
Oversized foods or metal utensils must not be inserted in a toaster-oven as they may create a fire or risk of electric shock.
A fire may occur if toaster-oven is covered or touching flammable material, including curtains, draperies, walls and the like, when in operation. Do not store any item on top of the appliance when in operation.
Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts involving a risk of electric shock.
Extreme caution must be exercised when using containers constructed of other than metal or glass.
Do not store any materials, other than the manufacturer’s recommended accessories, in this oven when not in use.
Do not place any of the following materials in the oven: paper, cardboard, plastic and the like.
Do not cover crumb tray or any part of the oven with metal foil. This will cause overheating of the oven.
To reduce the risk of fire, do not place any heating or cooking appliance beneath the appliance.
To reduce the risk of fire, do not mount unit over or near any portion of a heating or cooking appliance.
To reduce the risk of electric shock, do not mount over a sink.
To reduce the risk of fire, do not store anything directly on top of the appliance surface when the appliance is in operation.
Do not allow cord(s) to contact rear surface of toaster oven.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
4
3
Product may vary slightly from what is illustrated.
† 1. Mounting hood / deflector (Part # TROS1500-01 (silver))
2. Mounted unit † 3. Temperature selector (Part # TROS1500B-02 (black), TROS1500-02 (gray)) † 4. Cooking function selector (Part # TROS1500B-03 (black), TROS1500-03 (gray))
5. Power ON indicator light † 6. TOAST / TIMER selector (Part # TROS1500B-04 (black), TROS1500-04 (gray))
7. Dropdown crumb tray
8. Rack slots (both sides) † 9. Slide rack (Part # TROS1500-05) † Consumer replaceable/removable parts
GROUNDED PLUG
As a safety feature, this product is equipped with a grounded plug, which will only fit into a three-prong outlet. Do not attempt to defeat this safety feature. Improper connection of the grounding conductor may result in the risk of electric shock. Consult a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
TAMPER-RESISTANT SCREW Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
a) A short power-supply cord (or detachable power-supply cord) is to be provided
to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and
may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance,
2) If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and
3) The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
Note: If the power supply cord is damaged, it should be replaced by qualified personnel. In Latin America, by an authorized service center.
A1
6
5
GETTING STARTED
• Remove all packing material, labels and any stickers.
• Remove and save literature.
• Unpack mounting washers, screws and spacers for mounting and set them aside in a safe place where they will not roll away or get lost.
Important: Do not attempt to operate appliance until it is properly installed. CHOOSE A LOCATION
When choosing your location, consider the following:
DO make sure to mount within reach of an electrical outlet.
DO consider your normal work patterns in the kitchen when choosing location.
DO NOT mount over any heating or cooking appliance such as your range or oven.
DO NOT mount over or near a sink.
DO NOT mount under, in front of or behind any under-cabinet light fixtures.
Note: Do not install closer than 4 inches to any vertical surface or to any horizontal surface beneath the unit.
Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling.
Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!
Caution: When selecting a location for your toaster oven, make sure you have adequate room to reach the Rear Receptacle.
Note: If you are connecting another †SpaceMaker appliance into the Save-A-
Plug™ outlet, make sure you can easily unplug the appliance after each use.
DETERMINE CABINET TYPE
Prior to taping the mounting template and beginning to drill your holes, determine if your cabinet has a flat bottom (B) or an overhanging lip (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has a lip, refer to SPACER MOUNTING INSTALLATION.
B
C
† 1. Mounting Parts (Part # SDC-MOUNTING KIT)
16 Spacers 4 ½" 4 ¼" 4
3
/16"
4
1
/16"
12 Screws 4 1" 4 1½" 4 2¼"
4 Washers
2. Mounting Template (in box) † 3. Mounting Bracket
(Part # Part #SDCW-BRACKET)
A3
CONTROL PANEL
1. Temperature selector
2. Cooking function selector
3. Power ON indicator light
4. TOAST / TIMER selector Important: When making toast or
using the TIMER function, always turn the dial past 10 and then turn back or forward to desired setting.
A2
8
7
Important: The hood/deflector of the toaster oven is removable to make installation easier. To remove, pull forward slightly on the hood to release the front hooks (F). Once front hooks have released, the hooks at the rear will disengage easily. Once removed, mount hood in place following the directions below and then reattach the appliance once the hood has been mounted.
8. Hold hood in place, aligning front of hood with front edge of cabinet; drilled holes on cabinet should be aligned with mounting holes on the hood.
9. Screwing from inside the cabinet down into holes, tighten 4 screws in place to secure hood to cabinet.
Note: Always tighten screws to ensure the appliance does not move or shake during operation.
10. Once the hood is secured, lift the toaster oven up, engaging the rear hooks on
the hood first, and then the front.
11. Extra cord can be hung over cord management hook behind unit (G).
Warning: Risk of electrical shock and fire. Do not allow cord(s) to touch rear surface of oven.
Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!
Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-
Plug™ outlet, make sure you can easily unplug the appliance after each use.
12. Your †SpaceMaker™ appliance is now ready for use!
F
G
STANDARD INSTALLATION (FLAT CABINET) Important: Always wear protective glasses or goggles to prevent injury when
drilling.
1. Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.
2. With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).
Important: Do not align screw holes on template with the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.
3. Once thick line is straight with bottom front edge, pull template tight and tape down on all 4 corners to hold in place.
4. Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).
Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.
5. Once holes are drilled, remove tape and mounting template and save template with your instructions in case you move or wish to remount at a later time.
6. Wipe dust and debris off inside cabinet surface. Also, make sure under-side of cabinet is clean.
7. Place a washer inside the cabinet over each of the 4 holes you drilled.
D
E
10
9
Important: Do not align screw holes on template with the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.
6. Drilling from under the cabinet up, drill holes through the 4 places marked on the template using a ¼-inch drill bit (see illustration E).
Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.
7. Once holes are drilled, remove tape and mounting template and save template with your instructions in case you move or wish to remount at a later time.
8. Wipe dust and debris off inside cabinet surface. Also, make sure under side of cabinet is clean.
9. Place a washer inside the cabinet over each of the 4 holes you drilled.
10. Now, use your ruler or the paper ruler provided to measure the overhang height, placing your ruler vertically against the underside of the cabinet behind the overhang. This number determines the number of spacers you need, using a number of spacers equal to the overhang height. For example, a 1” overhang would use 2, ½” spacers on each of the rear holes (L).
11. Place a washer inside the cabinet over each of the 4 holes you drilled.
12. Drop one of your screws through each of the washers covering the holes in the cabinet, from inside the cabinet down.
13. Place the appropriate number of spacers determined in step 9 on each screw to the appliance will be even (M).
K
L
SPACER MOUNTING INSTALLATION (OVERHANG LIP CABINETS) Important: Always wear protective glasses or goggles to prevent injury when
drilling. Note: Spacers are provided in case your cabinet has an overhang lip at the front
edge. The spacers are used on the rear screw holes of the appliance to ensure it is level with the front. Only use spacers if your cabinet has an overhang.
1. Clear countertop under installation area to avoid getting on other appliances or items. Open cabinets and remove contents to make mounting easier
2. Using a ruler, measure the thickness of the overhang lip from the front to back of the overhang, accurately noting the number for use in the following step (H).
Note: If you do not have a ruler, you may cut out and use the paper ruler provided on the edge of your mounting template.
3. Once you have the overhang thickness, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the height of the lip used with that line. For example, if your cabinet has an overhang thickness of ½”, you will use the ½” dashed line on the template.
4. With cabinet doors open, place line selected on mounting template even with the bottom front edge of your cabinet, and tape in place against the lip (J).
5. With the paper securely taped in place against the lip, fold the rest of the mounting template back against the underside of cabinet surface, bending it to remain flush against both the back of the lip and the underside of the cabinet (K).
J
H
M
12
11
How to Use
This appliance is for household use only.
GETTING STARTED
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.
• Insert slide rack.
• Remove tie from cord and unwind.
• Remove tag from plug.
• Plug unit into electrical outlet.
Caution: This oven gets hot. When in use, always use oven mitts or potholders when touching any outer or inner surface of the oven (N).
Note: During first few minutes of use you may notice smoke and a slight odor. This is
normal and should cause no concern.
HELPFUL HINTS ABOUT YOUR OVEN
• When oven is in operation, green light will come on and remain illuminated until oven is turned off manually or automatically when timer has been used.
• When selecting baking time for a particular product or recipe, include preheat time – normally 8 to10 minutes.
• This oven has a 30-minute timer.
• Metal, ovenproof glass and ceramic bakeware without lids can be used in the oven.
• If foods require covering, use aluminum foil.
• Be sure the top of the container or food being baked is at least 1 inch away from the upper heating elements (P).
Note: For spacer installation, you may require assistance (in mounting) in order to hold spacers in place while securing the appliance at the same time. If assistance is not available, use a small clamp to hold the spacers in place while you position the appliance.
Important: The hood/deflector of the toaster oven is removable to make installation easier. To remove, pull forward slightly on the hood to release the front hooks (see illustration F). Once front hooks have released, the hooks at the rear will disengage easily. Once removed, mount hood in place following the directions below and then reattach the appliance once the hood has been mounted.
14. Once spacers are set, hold hood up and tighten screws to secure. Screw from inside the cabinet down.
Note: Always tighten screws to ensure the appliance does not move or shake during operation.
15. Once the hood is secured, lift the toaster oven up, engaging the rear hooks on the hood first, and then the front.
16. Pull out cord from cord storage behind appliance and plug into standard electrical outlet. Extra cord can be hung over cord management hook behind unit (see illustration G).
Warning: Risk of electrical shock and fire. Do not allow cord(s) to touch rear surface of oven.
Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!
Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-
Plug™ outlet, make sure you can easily unplug the appliance after each use.
17. Your †SpaceMaker™ appliance is now ready for use!
N
P
Loading...
+ 16 hidden pages