Black & Decker TR200TI User Manual

www.blackanddecker.ae

TR200TI

ENGLISH

2

3

6

7

4

8

1

5

12

10

9

11

1. Handle 2. Spray button

3. Spray nozle 4. Spray water tank cover

5. Handle lock button 6. Steam water tank

7. Steam control 8. Temperature control dial

9. Temperature setting marker 10. Heating light indicator

11. Sole plate 12. Heel rest

2

ENGLISH

Intended use

Your Black & Decker iron has been designed to
remove creases from fabrics using heat & steam
and is not to be used for any other purpose.

This product is intended for household use only.

Read this entire manual carefully
before using the appliance.

Denotes the risk of electric shock.

Safety instructions

• Warning! When using mains-powered

appliances, basic safety precautions,
including the following, should always be
followed to reduce the risk of fire, electric
shock, personal injury and material damage.

• The intended use is described in this manual.

The use of any accessory or attachment or
the performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.

• Retain this manual for future reference.

• Always route the cord carefully to avoid a

tripping hazard.

• Never operate an appliance directly below

the socket-outlet it is connected to.

Using your appliance

• Always take care when using the appliance.

• Do not use the appliance outdoors.

• Do not operate the appliance if your hands

are wet. Do not operate the appliance if you
are barefoot.

• Guide the power supply cord neatly so it

does not hang over the edge of a worktop
and cannot be caught accidentally or tripped
over.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep the
power supply cord away from heat, oil and
sharp edges.

• If the power supply cord is damaged during

use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.

• Disconnect the appliance from the power

supply when not in use and before cleaning.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• Do not allow children or any person unfamiliar

with these instructions to use the appliance.

• Do not allow children or animals to come near

the work area or to touch the appliance or
power supply cord.

• Close supervision is necessary when the

appliance is used near children.

After use

• Switch off and remove the plug from the

socket before leaving the appliance
unattended and before changing, cleaning or
inspecting any parts of the appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not
have access to stored appliances.

3

ENGLISH

Inspection and repairs

• Before use, check the appliance for

damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.

• Do not use the appliance if any part is

damaged or defective.

• Have any damaged or defective parts

repaired or replaced by an authorised repair
agent.

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is

damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.

• Never attempt to remove or replace any

parts other than those specified in this
manual.

• Do not attempt to repair the appliance. Take

it to your nearest Black & Decker-owned or
authorised Service Centre for repair.

Electrical safety

This product must be earthed. Always
check that the power supply
corresponds to the voltage on the

rating plate.
Power plugs must match the outlet. Never

modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1) appliances.
Unmodified plugs and matching outlets will
reduce the risk of electric shock.

Extension cables & Class 1
product

• A 3-core cable must be used as your

appliance is earthed and of Class 1
construction.

4

• Up to 30m (100ft) can be used without loss of

power.

To avoid the risk of electric shock, do
not immerse the cord, plug or appliance
in water or other liquid.

• If the supply cord is damaged, it must be

replaced by the manufacturer or an
authorized Black & Decker Service Center in
order to avoid a hazard.

Additional safety instructions for
irons

• Always route the cord carefully to avoid a

tripping hazard.

• Do not use the appliance near water.

• Do not place the appliance near heat sources

or directly under cabinets. Do not use the
appliance in the presence of explosive or
flammable materials.

• The filling aperture must not be opened

during use.

• Steam may escape from the soleplate.

• Surfaces may be hot during use and during

the cool down period.

• Set the temperature control dial to the min

position before plugging in or out.

• Let the appliance cool down before leaving it

unattended and before cleaning or inspecting
any parts of the appliance.

• The power supply cord should not touch the

hot soleplate during use or during the cool
down period.

• Do not touch the soleplate until it has cooled

down.

• Wait until the appliance has cooled down

before emptying the water tank as the water
may still be hot.

• Do not immerse the appliance, cored set or

plug in liquids.

ENGLISH

• Always disconnect the appliance from the

supply before filling, emptying, cleaning, or
carrying out any maintenance on the
appliance.

• This product is designed to remove creases

from fabrics using heat & steam and is not to
be used for any other purpose.

• The iron must not be left unattended while it

is connected to the supply mains

• The plug must be removed from the

socket-outlet before the water reservoir is
filled with water.

• The iron must be used and rested on a

stable surface.

• The iron is not to be used if it has been

dropped, if there are visible signs of damage
or if it is leaking.

Before first use

• Remove all packaging from the appliance.

• Choose the required supply voltage by

sliding the voltage selector to the correct
position. (The voltage selector is located on
the base of the appliance)

Assembly

Warning! Before assembly, make sure that the
appliance is switched off and unplugged.

To raise or collapse the handle

The handle of your appliance can be collapsed to
enable compact storage when traveling.

• Press and hold the handle lock button (5).

• Move the handle (1) up for use or down for

storage.

Clean the appliance before first use.

• Release the handle lock button (5).
Filling the steam water tank

In order to be able to use the steam function, you
will first need to fill the steam water tank (6) with
water.

• Make sure that the appliance is unplugged.

5

ENGLISH

• Set the steam control (7) to the no steam

position.

• Hold the appliance at an angle.

• Fill the appliance with water using the beaker

provided.

Warning! Never fill above the maximum filling
level indicted on the beaker provided. Normal
tap water can be used, but if you live in a hard
water area the use of distilled water is
recommended. Do not use chemically de-scaled
water.

Filling the spray water tank

In order to be able to use the spray feature, you
will first need to fill the spray water tank with
water.

• Make sure that the appliance is unplugged.

• Open the spray water tank cover (4).

• Hold the appliance at an angle.

• Fill the appliance with water using the beaker

provided.

• Close the spray water tank cover (4).

Warning! Never fill above the maximum filling

level indicted on the beaker provided. Normal
tap water can be used, but if you live in a hard
water area the use of distilled water is
recommended.

Do not use chemically de-scaled water.

Use

Warning! Do not leave the appliance

unattended while it is connected to the power
supply and during the cool down period.

Temperature setting

The required temperature setting depends on
the garment fabric.

• Adjust the temperature control dial (8) to the

required setting:

- • Synthetics

- •• Silk/wool

- ••• Cotton/Linen

6

If you are unsure of the fiber content of a
garment: start with a low temperature setting and
test on a small area (seam or inside hem). If
wrinkles remain, gradually increase the heat
setting until you find the optimum setting.

Using as a dry iron

Stand the appliance on its heel rest (12).

•

• Plug the appliance in and switch on.

• Set the steam control (7) to the no steam

position.

• Adjust the temperature control dial (8) to the

required setting.

The heating light (10) will switch off when the
appliance has reached the required temperature.

Using as a steam iron

Fill the water steam tank as described above.

•

• Stand the appliance on its heel rest (12).

• Adjust the temperature control dial (8) to the

required steam setting.

The heating light (10) will switch on. When the
heating light switches off, the iron will be ready
for use as a steam iron.

The heating light will regularly switch on and off
whilst ironing.

• To create steam, set the steam control (7) to

the steam position.

• Plug the appliance in and switch on.
Using the spray button

The spray feature can be used at any
temperature setting when either steam or dry
ironing.

• Make sure that there is water in the spray

water tank.

• Press the spray button (2) several times to

activate the pump while you are ironing.