Black & Decker SM427 User Manual
SM427 | Bicycle Handlebar Mount with Universal Holder
l
exp
and
a
.
SM514-KR | Slim-Grip™ Universal Phone and Smartphone Holder with Mini Windshield Suction and Dashboard Mount
GN014-SBH
Mini Windshield
Suction Pedestal
Step 1.
82 mm
expandable to
118 .5 mm
SM050-2
Slim-Grip™
Universal Phone Holder
Find a safe location on the interior of the vehicle’s windshield
to mount the pedestal. Firmly push the suction base (A)
against the windshield and fl ip the base lever down (B) to the
locked position. See diagram below.
A
B
Package Contents:
(1) SM050-2 - Slim-Grip™ Universal phone and smartphone holder
(1) GN014-SBH - Mini Windshield Suction and Dashboard Mount
Holder included is Universal, designed to fi t nearly ALL non-fl ip mobile
phones regardless of whether a protective case or silicone sleeve is attached
to the phone.
Most smartphones, mobile phones, and •
cell phones having heights between
80mm and 115mm tall
Apple iPhone - All models•
RIM BlackBerry - All non-fl ip models•
HTC Phones - All non-fl ip models•
Motorola Phones - All non-fl ip models•
Nokia Mobile Phones - All non-fl ip models•
All brand n ames and produc t names are tradem arks or registe red trademark s of their respec tive owners.
Palm - All non-fl ip models•
LG Mobile Phones - All non-fl ip models•
Samsung - All non-fl ip models•
Sony Ericsson - All non-fl ip models•
Sanyo - All non-fl ip models•
Pantech - All non-fl ip models•
Google - All non-fl ip models•
Connecting the Slim-Grip™ Holder to Dual T-Tab PedestalWindshield Mounting
Step 1.
Connect the dual T-slots (A) on holder to the dual T-tabs (B) on
the pedestal head.
Optional Cord
Catcher
Install the Support Legs to the Holder
Step 1.
Insert the holder support legs (A) by sliding them into the
support leg grooves (B) on the top and bottom of the holder.
B
A
A
B
A
B
Insert Phone into Holder
Step 1.
Secure holder with your hand for support, as spring-loaded
mechanism requires signifi cant force to operate. Hold your phone
and insert into universal holder by pushing down on the bottom
spring-loaded support legs with moderate amount of pressure
A
(C). Slide the top of the device under the top support legs (D) until
it fi ts snuggly in the holder.
D
A
C
Continued on othe r side...
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Frid ay 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
࣬৹ࢄߔ
Representative in KOREA
www.knctek.com
TEL : 02) 839-5701
Designed in USA | Made in China And Taiwan
© Copyright 2010 Arkon Resources, Inc.
FAX : 02) 830-5703
SM514-KR | Slim-Grip™ Universal Phone and Smartphone Holder with Mini Windshield Suction and Dashboard Mount
Adjusting Holder to Fit Phone
E
E
Step 1.
If necessary, adjust the support legs (E) on top and bottom by
sliding them laterally to avoid any buttons or ports that may be
on your phone.
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Frid ay 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
࣬৹ࢄߔ
Representative in KOREA
www.knctek.com
TEL : 02) 839-5701
Designed in USA | Made in China And Taiwan
© Copyright 2010 Arkon Resources, Inc.
FAX : 02) 830-5703
Loading...