Black & Decker LDX172C TYPE 1 Owner’s Manual
INSTRUCTI AL
Catalog Number
LDX172
CORDLESS DRILL
PLEASE READ BEFORE RETURNING
THiS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
WWW.BLACKAN DDECKER.COM/INSTANTANSWERS
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon.- Fri
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAI_OL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE ARRII_RE.
INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y
POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Black & Decker purchase, go to
for instant answers 24 hours a day.
to speak with an agent.
Itisimportantforyoutoreadandunderstandthismanual.
TheinformationitcontainsrelatestoprotectingYOURSAFETYandPREVENTING
PROBLEMS.Thesymbolsbelowareusedtohelpyourecognizethisinformation.
Z_[:)ANGER:Indicatesanimminentlyhazardoussituationwhich,ifnotavoided,will
resultindeathorseriousinjury.
/_ WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
z_ CAUTION: Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
z_WARNING! Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warninqs refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock:
f) If operating a power tool in a damp location is unavoidable, use a ground fault
circuit interrupter (GFCl) protected supply. Use of a GFCI reduces the risk of
electric shock:
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power too/wMle you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask; non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off=position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power toot. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power toot repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to controL
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used w_t"nanother
battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause bums or a fire.
d) Under abusive conditions, liquid may be ejected from the battery, avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or bums.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Use auxiliary handle(s) if supplied with the tool. Loss of control can cause personalinjury.
• Hold power tool by insulated gripping surfaces when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
• When working on a ladder or on scaffolding be sure to lay the tool down on its side
when not in use. Some tools with large battery packs wilt stand upright but may be easily
knocked over.
• Use clamps or another practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
• Keep your hair, clothing, and gloves away from air vents. Air vents often cover
moving parts inwhich these items can be caught.
• Hold tool firmly with two hands, one hand on the handle, and the other gripping the
bottom around the battery area. Use auxiliary handle if provided. Loss of control can
z_ause personal injury.
WARNING: Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
. arsenic and chromium from chemically-treated lumber.
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
z_WARNING: Use of this tool can generate and/or disperse dust, which may
cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate for the dust exposure. Direct particles
away from face and body.
z_WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty.
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
The label on your tool may include the following symbols.
• ANSI Z87. 1 eye protection (CAN/CSA Z94.3)
ANSI S12.6 ($3. 19) hearing protection
NIOSH/OSHA/MSHA respiratory protection
V .......................... volts
Hz ........................ hertz
min ........................ minutes
- - - ...................... direct current
[] .......................... Class II Construction
z_ ........................ safety alert symbol
A.......................... amperes
W ........................ watts
,x, ...................... alternating
current
no ........................ no load speed
G ........................ earthing terminal
.../min .................. revolutions or
reciprocations per minute
1. Switch
2. Forward/reverse button
3. Torque Adjustment Collar
4. Keyless Chuck
5. Charging port
6. Screwdriver bit holder
7. Charger
8. Charging Indicator
4
• Donotdisassembleoropen,drop(mechanicalabuse),crush,bendordeform,puncture,
orshred.
• Donotmodifyorremanufacture,attempttoinsertforeignobjectsintothebattery,
immerseorexpose to water or other liquids, or expose to fire, excessive heat including
soldering irons, or put in microwave oven.
• Only use the battery with a charging system specified by the manufacturer/supplier.
• Do not short-circuit a battery or allow metallic or conductive objects to contact both
battery terminals simultaneously.
• Dispose of used batteries promptly according to the manufacturer/supplier's instructions.
• Improper battery use may result in a fire, explosion, or other hazard.
• Battery usage by children should be supervised.
Z_WARNING: Never attempt to open the battery for any reason. If battery case is
cracked or damaged, do not insert into charger. Do not crush, drop or damage battery.
Do not use a battery or charger that has received a sharp blow, been dropped, run over
or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on).
Damaged batteries should be returned to service center for recycling.
1. This manual contains important safety and operating instructions.
2. Before using battery charger, read aJl instructions and cautionary warnings on battery
charger andproduct using battery. _CAUTION: To reduce the risk of injury, use
charger only with this product. Batteries in other products may burst causing personal
injury or damage.
3. Do not expose charger to rain or snow.
4. Use of an attachment not recommended or sold by Black & Decker may result in a
risk of fire, electric shock, or injury to persons.
5. To reduce risk of damage to electric plug and cord, putt by plug rather than cord when
disconnecting charger.
6. Make sure cord is located so that it wilt not be stepped on, tripped over, or otherwise
subjected to damage or stress.
7. An extension cord should not be used unless absolutely necessary. Use of improper
extension cord could result in a risk of fire, electric shock or electrocution.
a. Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round
acketed extension cords should be used, and we recommend that they be listed by
nderwriters Laboratories (U.L). Ifthe extension is to be used outside, the cord must
be suitable for outdoor use. Any cord marked for outdoor use can also be used for
indoor work. The letters "W" or "WA" on the cord jacket indicate that the cord is
suitable for outdoor use.
b. An extension cord must have adequate wire size (AWG or American Wire Gauge) for
safety, and to prevent loss of power and overheating. The smaller the gauge number
of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity
than 18 gauge. When using more than one extension to make up the total length, be
sure each extension contains at least the minimum wire size.
Chart for minimum wire size (AWG) of Extension Cords
Total Extension Cord Length (ft) 0-25 26-50 51-100 101-150
8. Use only the supplied charger when charging your toot. he use of any other charger
could damage the toot or create a hazardous condition.
9. Use only one charger when charging.
10. Do not attempt to open the charger. There are no customer serviceable parts inside.
Return to any authorized Black & Decker service center.
11. DO NOT incinerate the toot or batteries even if they are severely damaged or
completely worn out. The batteries can explode in a fire.
12. Do not incinerate the battery even if it is severely damaged or is completely
worn out. The batteries can explode in a fire. Toxic fumes and materials are created
when lithium ion batteries are burned.
13. Do not charge or use battery in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Inserting or removing the drill from the charger may
ignite the dust or fumes.
Nameplate rating AMPS - 0 i 10.0
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
18 16 16 14
14.Ifbatterycontentscomeintocontactwiththeskin,immediatelywashareawithmild
soapandwater.Ifbatteryliquidgetsintotheeye,rinsewaterovertheopeneyefor
threeminutesoruntilirritationceases.Ifmedicalattentionisneeded,thebattery
Z electrolyteiscomposedofamixtureofliquidorganiccarbonatesandlithiumsalts.
WARNING:Burnhazard.Batteryliquidmaybeflammableifexposedtosparkorflame.
THEBATTERIESINYOURTOOLARENOTFULLYCHARGEDATTHEFACTORY.
BEFOREATTEMPTINGTOCHARGETHEM,THOROUGHLYREADALLOFTHE
SAFETYINSTRUCTIONS.
Tochargeyourtoot,followthestepsbelow.
1. Plugthechargerintoanystandard120Volt60Hz
electricaloutlet.
2. Insertthechargerplug(9)intothechargingport(5)
asshowninfigureA.ThechargingindicatorLED
(8)wiltflash,indicatingthatthebatteryinsidethe
drillisbeingcharged.Thecompletionofchargeis _:
indicatedbytheLED(8)remainingoncontinuously.
3. Letthetoolchargeinitiallyfor9hours.Afterthe
initialcharge,undernormalusage,yourtoolshould
befullychargedin3to9hours.
1. Afternormalusage,yourtoolshouldbefullychargedin3to9hours.Yourtootwas
sentfromthefactoryinanunchargedcondition.Beforeattemptingtouseit,itmust
bechargedforatleast9hours.
2. DONOTchargethebatteriesinanairtemperaturebelow40°F(4,5°C)orabove
105°F(+40,5°C).Thisisimportantandwiltpreventseriousdamagetothebatteries.
Longestlifeandbestperformancecanbeobtainedifbatteriesarechargedwhenair
temperatureisabout75°F(23,8°C).
3. Whilecharging,thechargermayhumandbecomewarmtotouch.Thisisanormal
conditionanddoesnotindicateaproblem.
4. Ifthebatteriesdonotchargepropertyi(1)Checkcurrentatreceptaclebypluggingin
atamporotherappliance.(2)Checktoseeifreceptacleisconnectedtoalight
switchwhichturnspoweroffwhenyouturnoutthelights.(3)Movechargerandtool
toasurroundingairtemperatureof40°F(4,5°C)to105°F(+40,5°C).(4)Ifthe
receptacleandtemperatureareOK,andyoudonotgetpropercharging,takeor
sendthetootandchargertoyourlocalBlack&Deckerservicecenter.SeeTools
Electricinyellowpages.
5. Thetoolshouldberechargedwhenitfailstoproducesufficientpoweronjobswhich
wereeasilydonepreviously.DONOTCONTINUEusingproductwithitsbatteriesina
depletedcondition.
TRIGGER SWITCH & REVERSING BUTTON (FIGURE B)
The drill is turned ON and OFF by pulling and releasing the trigger switch (1).
A forward/reverse control button (2)
determines the direction of the tool and
also serves as a lock off button.
To select forward rotation, release the
trigger switch and depress the
forward/reverse control button to the left.
To select reverse, depress the forward/
reverse control button the opposite direction.
NOTE: The center position of the control
button locks the tool in the off position.
When changing the position of the control
button, be sure the trigger is released.
TORQUECONTROL(FIGUREC)
Thistoolisfittedwithatorqueadjustmentcollar(3) to select the operating mode and to
set the torque for tightening screws. Large
screws and hard workpiece materials require
a higher torque setting than small screws
and soft workpiece materials.
For drilling in wood, metal and plastics,
set the collar to the drilling position
symbol _.
For screwdriving, set the collar to the
desired setting. If you do not yet know the
appropriate setting, proceed as follows:
Set the collar to the lowest torque setting.
Tighten the first screw.
If the clutch ratchets before the desired
result is achieved, increase the collar setting and continue tightening the screw.
Repeat until you reach the correct setting. Use this setting for the remaining screws.
KEYLESS CHUCK (FIGURE D)
zLWARNING: Make certain the lock-off button is engaged to prevent switch actuation
before installing or removing accessories.
To insert a drill bit or other accessory:
1. Grasp the rear half of the chuck (4) with
one hand and use your other hand to
rotate the front half (4a) in the
counterclockwise direction, as viewed
from the chuck end.
2. Insert the bit or other accessory fully into
the chuck, and tighten securely by
holding the rear half of the chuck and
rotating the front portion in the clockwise
direction as viewed from the chuck end.
z_WARNING: Do not attempt to tighten
drill bits (or any other accessory) by gripping
the front part of the chuck and turning the
tool on. Damage to the chuck and personal
injury may occur when changing accessories.
SCREW DRIVING
For driving fasteners, the reversing button should be pushed to the left. Use reverse
(button pushed to the right) for removing fasteners. When moving from forward to reverse,
or vice versa, always release the trigger switch first.
ON BOARD BIT STORAGE
A bit storage slot (6) is built-in to the area just above the battery pack.
DRILLING
• Use sharp drill bits only.
• Support and secure work properly, as instructed in the Safety Instructions.
• Use appropriate and required safety equipment, as instructed in the Safety Instructions.
• Secure and maintain work area, as instructed in the Safety Instructions.
• Run the drill very slowly, using light pressure, until the hole is started enough to keep the
drill bit from slipping out of it.
• Apply pressure in astraight line with the bit. Use enough pressure to keep the bit biting
but not so much as to stall the motor or deflect the bit.
• Hold the drill firmly with two hands, one hand on the handle, and the other
gripping the bottom around the battery area.
• DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT
TO START IT. DAMAGE TO THE DRILL CAN RESULT.
• Minimize stalling on breakthrough by reducing pressure and slowly drilling through the
last part of the hole.
• Keep the motor running while pulling the bit out of a drilled hole. This will help reducejamming.
• Make sure switch turns drill on and off.
DRILLINGIN WOOD
Holes in wood can be made with the same twist drill bits used for metal or with spade bits.
These bits should be sharp and should be pulled out frequently when drilling to clear chips
from the flutes.
DRILLING IN METAL
Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which
should be drilled dry. The cutting lubricants that work best are sulfurized cutting oil or bardoil.
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the toot into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
Problem Possible Cause Possible Solution
• Unitwill notstart. • Batterypack not charged. •Check battery pack charging
• Batterypack will notcharge. •Charger not plugged in.
•Surrounding airtemperature
too hotor too cold.
For assistance with your product, visit our website wwwoblackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
requirements.
• Plugcharger intoa workingoutlet.
Referto "ImportantCharging Notes"for
more details.
• Move charger andbatterypack to a
surrounding airtemperature ofabove
40degrees F (4.5°C)orbelow
105degrees F (+40.5°C).
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
Z_WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
The RBRC TM (Rechargeabte Battery Recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid by
Black & Decker. In some areas, it is illegal to place spent lithium-ion batteries
in the trash or municipal solid waste stream and the RBRC program provides
an environmentally conscious alternative.
RBRC in cooperation with Black & Decker and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
toot to an authorized Black & Decker service center for recycling. You may also contact
your local recycling center for information on where to drop off the spent battery, or call
1=800=8=BATTERY.
ThisClassBdigitalapparatuscomplieswithCanadianICES-003.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowing
twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevice
mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB
digitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferenceto
radiocommunications.However,thereisnoguaranteethatinterferencewiltnotoccurin
aparticularinstallation.
Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,which
canbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto
correcttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiver
isconnected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.ThisClassBdigital
apparatuscomplieswithCanadianICES-003.
AllBlack&DeckerServiceCentersarestaffedwithtrainedpersonneltoprovide
customerswithefficientandreliablepowertootservice.Whetheryouneedtechnical
advice,repair,orgenuinefactoryreplacementparts,contacttheBlack&Deckerlocation
nearestyou.Tofindyourlocalservicelocation,refertotheyellowpagedirectoryunder
"Toolsi Electric"orcall:1-800-544-6986orvisitwww.blackanddecker.com
Black&Decker(U.S.)Inc.warrantsthisproductfortwoyearsagainstanydefectsin
materialorworkmanship.Thedefectiveproductwiltbereplacedorrepairedatnocharge
ineitheroftwoways.
Thefirst,whichwiltresultinexchangesonly,istoreturntheproducttotheretailerfrom
whomitwaspurchased(providedthatthestoreisaparticipatingretailer).Returnsshould
bemadewithinthetimeperiodoftheretailer'spolicyforexchanges(usually30to90days
afterthesate).Proofofpurchasemayberequired.Pleasecheckwiththeretailerfortheir
specificreturnpolicyregardingreturnsthatarebeyondthetimesetforexchanges.
Thesecondoptionistotakeorsendtheproduct(prepaid)toaBlack&Deckerownedor
authorizedServiceCenterforrepairorreplacementatouroption.Proofofpurchasemay
berequired.Black&DeckerownedandauthorizedServiceCentersarelistedunder
"Toots-Electric"intheyellowpagesofthephonedirectory.
Thiswarrantydoesnotapplytoaccessories.Thiswarrantygivesyouspecificlegalrights
andyoumayhaveotherrightswhichvaryfromstatetostateorprovincetoprovince.
Shouldyouhaveanyquestions,contactthemanagerofyournearestBlack&Decker
ServiceCenter.Thisproductisnotintendedforcommercialuse.
FREEWARNINGLABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, check country specific warranty information contained in
the packaging, call the local company or see the website for warranty information.
Imported by See 'Tools-
Black & Decker (U.S.) Inc., IZM
701 E. Joppa Rd. Pages-
Towson, MD 21286 U.S.A. for Service &
Sales
PERCEUSE SANS FIL
N° de catalogue LDX172
E 'E PLOI
._,LInE AVANT DE RETOURNER CE PRODUIT POUR
QUELQUE RAISON QUE CE SOIT :
Si des questions ou des problemes surgissent apres t'achat d'un produit
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
pour obtenir des reponses instantanement 24 heures par jour.
Si ta reponse est introuvable ou en t'absence d'acces a t'lnternet, composer te
1 800 544-6986 de 8 h a 17 h HNE, du tundi au vendredi, pour pader avec un agent.
Priere d'avoir le numero de catalogue sous la main lots de I'appet.
Black & Decker, consulter le site Web
10
Loading...