black & decker HNV115Bxx, HNV215Bxx, HNV220Bxx User Manual

CORDLESS HAND VACS
INSTRUCTION MANUAL
CATALOG NUMBERS
HNV115BXX* HNV215BXX* HNV220BXX*
Thank
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
*XX is a placeholder for the two-digit number at the end of your vacuum’s catalog number that designates your vacuum’s color.
you for choosing BLACK+DECKER!
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: Read all safety
warnings and all instructions. Failure to
follow the warnings and instructions listed below may result in electric shock, fire and/ or serious injury.
WARNING: Some household dust
contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead based paint.
WARNING: To reduce the risk of
fire, electrical shock or injury:
WARNING: To reduce the risk of
electric shock – Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle charger, including charger plug, and charger terminals with wet hands.
• Do not put any object into openings. Do
2
not use with any opening blocked; keep free of dust,lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or filters in place.
• Do not charge the unit outdoors.
• Use only the charger supplied by the manufacturer to recharge.
• Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
• This appliance is intended for household use only and not for commercial or industrial use.
• Shock Hazard. To protect against risk of electrical shock, do not put unit or charging base in water or other liquid.
• Do not allow the cord to hang over the edge of a table or counter or touch hot surfaces. The unit should be placed or mounted away from sinks and hot surfaces.
• Plug the charger directly into an electrical outlet.
• Use the charger only in a standard electrical outlet (120V/60Hz).
• Unplug the charger from outlet before any routine cleaning or maintenance.
• Do not look into the air vents when the unit is switched on, as sometimes there is a possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as debris inside the unit can be disturbed.
ADDITIONAL SAFETY WARNINGS
a) Prevent unintentional starting. Ensure
the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the
appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
b) Recharge only with the charger
specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
c) Do not use a battery pack or appliance
that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
d)Do not expose a battery pack or
appliance to fire or excessive temperature. Exposure to fire or
temperature above 266°F (130°C) may cause explosion.
e) Have servicing performed by a qualified
repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
WARNING: Do not
attempt to modify or repair the appliance
SAVE THESE INSTRUCTIONS
Symbols
• The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ..................volts
A ..................amperes
Hz ................hertz
W .................watts
min ..............minutes
or AC ......alternating current
or DC ..direct current
n
o ................no load speed
................Class I Construction
(grounded)
................earthing terminal
...............safety alert symbol
................Class II Construction
.../min or rpm...revolutions or reciprocation
FUCTIONAL DESCRIPTION
1. On/off switch
2. Bowl release button
3. Dust bowl
4. Charger
5. Charging bracket
HNV220B Models Only
6. Brush tool
7. Crevice tool
(double insulated)
per minute
1
2
3
7
6
5
Wall Mounting - Figure A
The product can be attached to a wall to provide a convenient storage and charging point for the appliance. When mounting to a wall, make sure the mounting method is suitable for the wall type and is appropriate to the weight of the appliance.
• Mark the location of the charger bracket (5) screw holes on the wall (within reach of an electrical outlet for charging the vacuum while it is on the wall bracket).
• Fix the mounting bracket to the wall using appropriate screws of wall, and weight of the appliance.
• Hang the appliance by placing the opening of the vacuum base over the hooks in the wall mount charging bracket.
A
and plugs for the type
Assembly Accessories - Figure B
(HNV220B Models Only)
Your hand vac may be supplied with some of the following accessories:
• A brush tool (6) for furniture and stairs.
A crevice tool (7) for conned spaces.
Fitting
• Insert the appropriate accessory into the front of the appliance as show in Figure B.
• Make sure the accessory is fully pushed in.
3
4
B
Charging the battery
WARNING: For use
only with the supplied charger.
Before rst use, the battery must be charged for at least 10 hours.
• Place the appliance on the charging bracket whenever it is not in use.
WARNING: Before charging, be sure
to empty all contents and dry thoroughly if needed to avoid damage to your appliance.
• Make sure the appliance is switched off.
• Place the appliance on the charging bracket (5).
• Plug in the charger.
• Leave the appliance to charge for at least 9 hours.
NOTE: While charging, the charger may become warm. This is normal and does not indicate a problem. The appliance can be
left connected to the charger indenitely.
WARNING: Do not charge the
battery at ambient temperatures below 50 °F or above 104 °F.
Optimizing the suction force
In order to keep the suction force optimised,
the lters must be cleared regularly during use.
EMPTYING AND CLEANING THE PRODUCT.
Removing the dust bowl and
lters - Figures D & E
WARNING: The lter is reusable and
should be cleaned regularly.
• Press the bowl release button (2) and pull the dust bowl (3) straight off as shown in
Figure D.
D
• While holding the dust bowl over a bin
or sink, pull out the lter (8) to empty the
contents as shown in Figure E.
• To replace the dust bowl, push it back onto
the handle until it clicks rmly into place.
WARNING:
without the lters. Optimum dust collection will only be achieved with a clean lter.
E
Never use the appliance
Switching On - Figure C
• To switch the appliance on, depress the on/off button (1). Once the button is released the vacuum will turn off.
C
Dry pick up
• For everyday spills of dry material.
Do not ll the dust bowl (3) beyond the end of the intake chute.
Cleaning the dust bowl and lter
The dust bowl and lter can be washed in warm soapy water.
Make sure the lter and the dust bowl are dry
before re-tting.
Replacing the lters
The lters should be replaced every
6 to 9 months and whenever worn or
damaged. Replacement lters (catalog
number EVF100) are available from your BLACK+DECKER dealer.
4
MAINTENANCE
Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the vac; never immerse any part of the vac into a liquid.
WARNING: Make sure the vacuum
is completely dry before using it. IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
The RBRC™ Seal
The RBRC® (Rechargeable Battery Recycling Corporation) Seal on the lithium-ion batteries (or battery packs) indicates that the costs to recycle these batteries (or battery packs) at the end of their useful life have already been paid by BLACK+DECKER. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the Call 2 Recycle® program provides an environmentally conscious alternative. Call 2 Recycle, Inc., in cooperation with BLACK+DECKER and other battery users, has established the program in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the spent nickel cadmium, nickel metal hydride or lithium-ion batteries to an authorized BLACK+DECKER service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery. RBRC® is a registered trademark of Call 2 Recycle, Inc.
Accessories
Recommended accessories for use with your appliance are available from your local dealer or authorized service center.
WARNING: The use of any accessory
this appliance could be hazardous.
not recommended for use with
Check out a selection of vacuums and floor care offered in our online store.
5
Loading...