Black & Decker D3030, D3032G Use And Care Manual

TM

ALLURE™

IRON FER À REPASSER

Use and Care Manual Guide d’utilisation et d’entretien

D3030, D3032G

2

Should you have any questions or concerns with your new product, please
call our Customer Service Line at 1-800-231-9786 (US and Canada).
Please do not return to the store.

Si vous avez des questions ou des préoccupations à propos de votre
nouveau produit, veuillez communiquer avec notre Service à la clientèle au
1 800 231-9786 (États-Unis et Canada). Veuillez ne pas rapporter le produit
au magasin.

Thank you for your purchase!

Merci de votre achat!

3

• READ ALL INSTRUCTIONS BEFORE USING.

• Use iron only for intended use.

• To protect against risk of electric shock,
do not immerse the iron in water or other
liquids.

• The iron dial should be turned to minimum
setting before plugging in or unplugging
from the outlet. Never yank cord to
disconnect from the outlet; instead grasp
plug and pull to disconnect.

• Do not allow cord to touch hot surfaces.
Let iron cool completely before putting
away. Loop cord loosely around iron when
storing.

• Always disconnect iron from electric
outlet before filling with water, cleaning, or
emptying and when not in use.

• Do not operate the iron if it has been
dropped, if there are visible signs of
damage to the iron or its cord, or if it’s
leaking. To avoid the risk of electric shock,
do not dissemble the iron; take it to a
qualified service person for examination
and repair, or call the appropriate toll­free number on the cover of this manual.
Incorrect reassembly can cause risk of
electric shock when the iron is used.

• Close supervision is necessary for any
appliance being used by or near children.
Do not leave iron unattended when
plugged in or on an ironing board.

• Burns can occur from touching hot metal
parts, hot water, or steam. Use caution
when you turn a steam iron upside down—
there might be hot water in the reservoir.
Avoid rapid movement of iron to minimize
hot water spillage.

• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliances by a person responsible for
their safety.

• Children should be supervised to ensure
that they do not play with the appliance.

• The iron must be used and rested on a
stable surface.

SPECIAL INSTRUCTIONS

• To avoid circuit overload, do not operate
another high wattage appliance on the
same circuit.

• If an extension cord is absolutely
necessary, a 15-ampere cord should be
used. Cords rated for less amperage can
result in a risk of fire or electrical shock due
to overheating. Care should be taken to
arrange the cord so that it cannot be pulled
or tripped over.

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should

always be followed, including the following:

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into
a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug
in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a
tamper-resistant screw to prevent removal
of the outer cover. To reduce the risk of fire
or electrical shock, do not attempt to remove
the outer cover. There are no user-serviceable
parts inside. Repair should be done only by
authorized service personnel.
Note: If the power supply cord is damaged, it
should be replaced by qualified personnel or in
Latin America by an authorized service center.

SAFETY FEATURES

4

GETTING TO KNOW YOUR
ALLURE™ IRON

1

2

3

4

5

6

7

8

9

10

11

1. Soleplate

2. Spray nozzle

3. Water-fill cover

4. Variable steam dial

5. Spray mist button

6. Burst of steam button

7. Power/auto off light

8. 360˚ pivoting cord

9. Temp dial

10. Water tank

11. Heel rest

Product may vary slightly from what is illustrated.

5

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove all labels, tags and stickers attached to the body, cord, or
soleplate of the iron.

• Remove and save literature.

• Please note that water droplets may still be visible in the tank at the time
of purchase. This is from the individual quality tests done to ensure that
every Allure™ iron meets our high standards for product performance.

FILLING THE WATER TANK

1. With the iron on a flat surface with the soleplate down, open the
water-fill cover.

2. Using a clean measuring cup, pour water into opening until water
reaches the “MAX” level mark on the side of the water tank. Do not
overfill. Close the water-fill cover securely.

3. Stand the iron on the heel rest.

4. To refill at any time during the ironing process, unplug the iron and
follow the above procedure.

USING YOUR IRON

1. Plug the iron into an outlet. The red Power Indicator Light will
illuminate on the handle, indicating that the iron is heating.

2. Read the manufacturer fabric labels for material content and
clothing care recommendations to help select the correct
temperature and steam settings.

3. Select the temperature on the iron by turning the “Temp” dial until
you’ve reached the desired setting. A setting guide is printed on the
base of the iron for quick reference.

4. Allow the iron about 2 minutes to heat up to the desired temperature.

5. To dry iron (iron without steam), it is not necessary to empty the
water tank; simply move the variable steam selector dial all the way
to the left on the Dry Iron setting.

6. To iron with steam, push the variable steam dial to the desired
amount of steam. For optimal results, the steam settings should be
used with the following temperature settings.

o No Steam: Silk and Blends (1 and 2)
o Steam Setting 1: Wool (3)
o Steam Setting 2: Cotton (4)
o Steam Setting 3: Linen (5)