Black & Decker D2030, D2530, D2630 Use & Care Manual

DIGITAL ADVANTAGE™

IRON PLANCHA

Use & Care Manual manual de uso y cuidado

D2030 D2530 D2630

Should you have any questions or concerns with your new product, please call our Customer Service Line at 1-800-231-9786 (US and Canada). Please do not return to the store.

Si usted tiene alguna inquietud o pregunta con su producto, por favor llame a nuestra línea de servicio al cliente una atención inmediata 1-800-231-9786 (EE.UU/Canadá) 01-800-714-2503 (México). No devuela a la tienda.

Thank you for your purchase!

Gracias por su compra!

• READ ALL INSTRUCTIONS BEFORE USING.

• Use iron only for its intended use.

• To protect against a risk of electric shock, do not immerse the iron in water or other liquids.

• The iron should always be turned to the minimum (min) setting before plugging or unplugging from outlet. Never yank cord to disconnect from the outlet; instead grasp plug and pull to disconnect.

• Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing.

• Always disconnect iron from electrical outlet when filling with water or emptying, and when not in use.

• Do not operate iron with a damaged cord, or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number. Incorrect reassembly can cause a risk of electric shock when the iron is used.

• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board.

• Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down or use the surge of steam – there may be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.

• The iron must not be left unattended while it is connected to the supply mains.

• The plug must be removed from the socketoutlet before the water reservoir is filled with water.

• The iron must be used and rested on a stable surface.

• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

SPECIAL INSTRUCTIONS

• To avoid circuit overload, do not operate another high wattage appliance on the same circuit.

• If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safely precautions should

always be followed, including the following:

SAVE THESE INSTRUCTIONS.

This product is for household use only.

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center.

SAFETY FEATURES

Product may vary slightly from what is illustrated.

1. Spray nozzle

2. Water-fill opening

3. Digital display

4. Power/temperature setting button

5. Burst of steam button

6. Spray mist button

7. Power indicator light

8. Heel rest

9. Water tank

10. Variable steam dial

GETTING TO KNOW YOUR DIGITAL ADVANTAGE™ IRON

HOW TO USE

This appliance is intended for household use only.

GETTING STARTED

• Remove any labels, stickers or tags attached to the body or soleplate of the iron.

• Please go to www.prodprotect.com/applica to register your warranty.

• Use ordinary tap water for ironing. Do not use water processed through a home softening system.

• For optimum performance, let the iron stand for 90 seconds before beginning to iron.

• Always stand the iron on its heel rest when powered on but not in use.

FILLING WATER TANK

1. Tilt the iron and using a clean measuring cup, pour water into water-fill opening until the water reaches the MAX mark on the water tank. Refill as needed.

Note: If you need to add water while ironing, unplug the iron and

follow above steps.

SELECTING A TEMPERATURE SETTING

1. Plug in the iron. The power indicator light turns on and a beep sounds; Temperature setting 1 (ACRYL) appears in the digital display. (A)

2. To select a temperature setting, press the temperature setting button below the digital display until you reach your desired setting from 1 to 7.

Note: See the fabric guide on the iron and read

garment's label to help you determine which temperature setting to use. (B)

Tip: If unsure of a garment’s fiber, test a small area (on an

inside seam or hem) before ironing.

3. The digital display will show the setting number and fabric type; these will flash on the display until the set temperature is reached.

4. When your set temperature is reached, the iron will beep once and the word “READY” will appear in the display. The temperature setting, number and “READY” will be displayed as you iron. (C)

5. To change temperature settings while ironing, just push the temperature button. When a lower setting is selected, fabric type will flash until the iron temperature has lowered to the correct level for that setting. The iron will beep once and "READY" will appear in the bottom of the display window.

IRONING WITH STEAM

1. For steam ironing, be sure the water tank is filled to MAX.

2. Turn the variable steam dial to the appropriate steam setting for your fabric. (D)

Note: See the fabric guide on the iron (B) and read

garment's label to help you determine which steam setting to use.

3. For optimum performance when using steam, stand iron on its heel rest until the selected temperature setting is reached.

4. When finished ironing, turn the variable steam dial to the steam off setting.

BURST OF STEAM

HORIZONTAL

Tip: Use to remove stubborn creases.

1. With the water tank filled to the MAX mark, set temperature setting and variable steam to the appropriate settings for your fabric. See fabric guide on the iron and read garment's label to help you determine fabric type.

2. For best performance, press the burst of steam

button at 5-second

intervals.

3. When finished ironing, turn the variable steam dial to the steam off setting, stand the iron on its heel, and unplug the iron.

VERTICAL

Tip: Use for removing wrinkles from hanging clothes and drapes.

2. Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)

3. Hold the iron close to, but not touching, the fabric.

4. Pull the fabric tight in your free hand and pump the burst of steam button as you move the iron over the fabric.

5. When finished ironing, turn the variable steam dial to the steam off setting, stand the iron on its heel, and unplug the iron.

+ 14 hidden pages

Black & Decker D2030, D2530, D2630 Use & Care Manual

Specifications and Main Features

Frequently Asked Questions

User Manual