When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury, including the following:
• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against fire, electric shock and injury to
persons do not immerse cord, plugs or appliance in
water or other liquid.
• Close supervision is necessary when any appliance
is used by or near children.
• Unplug from outlet when not in use and before
cleaning.
• Allow to cool before putting on or taking off parts,
and before cleaning the appliance.
• Do not operate any appliance with a damaged cord
or plug, or after the appliance malfunctions or has
been damaged in any manner. Contact Consumer
Support at the number listed in this manual.
• The use of accessory attachments not
recommended by the appliance manufacturer may
result in fire, electric shock or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter,
or touch hot surfaces.
• Do not place on or near a hot gas or electric
burner, or in a heated oven.
• To disconnect, press Power button until power
light goes off, then remove plug from wall outlet.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug is
intended to fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped
with a tamper-resistant screw to prevent
removal of the outer cover. To reduce
the risk of fire or electric shock, do not
attempt to remove the outer cover. There
are no user-serviceable parts inside.
Repair should be done only by authorized
service personnel.
• Do not use this appliance for other than
intended use.
• Do not open filter basket lid during brewing cycle.
Scalding and/or burns may occur.
• Keep lid on the carafe when in use.
• Scalding may occur if the lid is removed during the
brewing cycles.
• The carafe is designed for use with this appliance.
It must never be used on a range top.
• Do not set a hot carafe on a wet or cold surface.
• Do not use a cracked carafe or a carafe having a
loose or weakened handle.
• Do not clean carafe with cleansers, steel wool pads
or other abrasive material.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
ELECTRICAL CORD
1. A short power-supply cord is provided
to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
2. Extension cords may be used if care is
exercised in their use.
3. If a long detachable extension cord is used:
a) The marked electrical rating of the
power cord or extension cord should
be at least as great as the electrical
rating of the appliance.
b) If the appliance is of the grounded
type, the extension cord should be a
grounding-type 3-wire cord.
c) The cord should be arranged so that
it will not drape over the countertop
or tabletop where it can be pulled on
by children or tripped over.
Note: If the power cord is damaged,
please contact the warranty department
listed in these instructions.
2
Thank you for your purchase!
Gracias por su compra!
Should you have any questions or concerns with your new product,
please call our Customer Service Line at 1-800-231-9786 (US and
Canada). Please do not return to the store.
Si usted tiene alguna inquietud o pregunta con su producto, por
favor llame a nuestra línea de servicio al cliente una atención
inmediata 1-800-231-9786 (EE.UU/Canadá) 01-800-714-2503
(México). No devuela a la tienda.
3
WELCOME!
Congratulations on your purchase of the Black + Decker 12-Cup Programmable
Coffeemaker. We have developed this guide to ensure optimal product
performance and your complete satisfaction. Save this use and care manual and
be sure to register your appliance online at www.prodprotect.com/applica.
CONTENTS
IMPORTANT SAFEGUARDS
TABLE OF CONTENTS
GETTING TO KNOW YOUR COFFEEMAKER
GETTING TO KNOW YOUR CONTROL PANEL
FEATURES AND BENEFITS
PROGRAMMING YOUR COFFEEMAKER
AUTO BREW DELAY
1-4 CUP SETTING
BREW STRENGTH SELECTOR
BEFORE BREWING
BREWING COFFEE
CARE AND CLEANING
2
4
5
6
7
8
8
9
9
9
10
10
TROUBLESHOOTING
WARRANTY AND CUSTOMER SERVICE INFORMATION
WARNING
RISK OF FIRE OR ELECTRIC SHOCK. DO NOT OPEN.
The lightning symbol refers to “dangerous voltage”; the exclamation symbol refers
to maintenance instructions. See below.
Warning: To reduce the risk of fire or electric shock, do not remove the cover of the
coffeemaker. There are no user-serviceable parts inside. Repair should be done by
authorized service personnel only.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
4
12
13
GETTING TO KNOW YOUR COFFEEMAKER
1
2
3
6
7
8
9
4
5
10
1. Filter Basket Lid
2. Evenstream
3. Washable Brew Basket
™
Showerhead
(Part # CM2030-01 )
4. Water Reservoir
5. Easy-view Water Window
6. Control Panel
7. Carafe Lid (Part # CM2030-02 )
8. Perfect Pour
™
Carafe
(Part # CM2030-03 )
9. Nonstick “keep hot” carafe plate
10. Cord Storage
5
GETTING TO KNOW YOUR CONTROL PANEL
Indicates the delay start timer is set
brew setting
strength
settings
Fresh Brew Timer indicates
time since brewed
1-4 cup
Brew
Power
LCD Display with Digital Clock
Hour: Use to program the digital
clock (see “Programming Your
Coffeemaker” section)
Program: To begin programing
the Auto Brew delay start, press
and release button once (see
“Programming Your Coffeemaker”
section for details)
Auto: Turns on the Auto
Brew delayed start.
Minute: Use to program the digital
clock (see “Programming Your
Coffeemaker” section)
1-4 Cup: Press to maintain bold
coffee flavor when brewing 1-4
cups of coffee
Power: Start and stop brewing with
this lighted button
Strong: Select from 3 levels of
brew strength
No bars = regular
1 bar ( ) = strong
2 bars ( ) = bold
6
FEATURES AND BENEFITS
Evenstream™ Showerhead
This custom engineered technology
provides even saturation across
all coffee grounds producing an
optimally flavored cup.
Perfect Pour
™
Carafe
Specially designed to reduce dripping,
the Perfect Pour™ spout keep your
counters clean.
Easy Viewing Water Window
The water window shows the amount
of water in the reservoir for easy and
accurate filling.
Digital Clock
For your convenience, a
programmable digital clock located
on the LCD display.
Auto Brew
Program your coffee to brew at any
time, day or night, with 24-hour Auto
Brew delay start.
Brew Strength Selector
Customize the flavor of your coffee
by selecting from three brew strength
settings: regular, strong, or bold.
Sneak-A-Cup
™
Feature
Can’t wait for the full pot of coffee
to finish brewing? Sneak-A-Cup™
stops the flow of coffee into your
carafe, so you can fill your cup
before the brew cycle ends. Replace
the carafe within 20 seconds to
prevent brew basket overflow.
Fresh Brew Timer
After completing a brew cycle, your
coffeemaker will display the time
since brewed, in 1-minute increments,
up to 120 minutes.
Auto-Shutoff
For peace of mind, the “keep hot”
carafe plate will automatically shut
off 2 hours after the brewing cycle is
complete.
Removable Brew Basket
After brewing, simply remove brew
basket for easy washing by hand or
on your dishwasher’s top rack.
Cord Storage
Keep excess cord out of the way and
your countertop neat with simple
cord storage.
1-4 Cup Brew Option
This brew setting optimizes water
temperature and speed, so you can
maintain bold coffee flavor when
brewing 1-4 cups of coffee.
Auto Clean™ System
Your brewer will flash ‘CL’ on the
display after every 60 brews, alerting
you that it is time to run Auto Clean
to automatically de-scale your
coffeemaker. This helps to maintain
your brewer and coffee quality.
7
PROGRAMMING YOUR COFFEEMAKER
SETTING THE DIGITAL CLOCK
1. Plug your coffeemaker into a standard electrical outlet.
2. The digital clock will flash “12:00” to indicate that the time has not
yet been set.
3. Press the HOUR button until the correct hour appears on the display.
A “PM” symbol will appear in the upper right hand corner of the digital
display to indicate afternoon time settings. This symbol will not appear
for AM settings.
4. Press the MIN (minute) button until the correct minute value appears on
the display.
5. Your clock is now set.
SETTING THE AUTO BREW DELAY START
1. Ensure the digital clock has been set (see “SETTING THE DIGITAL CLOCK”
section for assistance).
2. Press the PROG (program) button. The display will flash “12:00.”
3. Press the HOUR and MIN buttons until they indicate the time you would like
automatic brewing to begin.
A “PM” symbol will appear in the upper right hand corner of the digital
display to indicate afternoon time settings. This symbol will not appear
for AM settings.
4. The Auto Brew display will flash for a few moments before switching back to
the digital clock.
TIP:
After programming, press the PROG button to check the preset Auto Brew time.
ACTIVATING THE AUTO BREW DELAY
1. Ensure the Auto Brew delay time has been set (see “SETTING THE AUTO BREW
DELAY” section for assistance).
2. Press the AUTO button once. The timer icon (
Brew has been activated.
3. If Auto Brew is activated, be sure to have both coffee grounds and water in your
coffeemaker. When the time of day and programmed Auto Brew time match, your
coffeemaker will automatically brew a fresh pot of coffee.
4. To deactivate Auto Brew, press the AUTO button again. The timer icon (
will disappear.
Note: If the unit is unplugged or power is interrupted, the digital clock and
Auto Brew settings will need to be reprogrammed.
8
) will appear, indicating that Auto
)
USING THE 1-4 CUP SETTING
Simply push the “1-4 Cup” button and an icon will appear on the LCD display
indicating the setting has been activated.
Your coffeemaker will optimize water temperature and speed, to maintain
bold coffee flavor when brewing 1-4 cups of coffee.
SETTING THE BREW STRENGTH SELECTOR
Customize the boldness of your coffee by selecting from three brew strength
settings: regular, strong, and bold.
To find your ideal flavor setting, simply press the STRONG button. Press once
for strong and twice for bold. Press a third time and you’ll be back to regular
strength coffee.
When using the Brew Strength Selector, the lower right hand corner of LCD
display will display:
a. No bars = regular (default setting)
b. 1 bar ( ) = strong
c. 2 bars ( ) = bold
BEFORE BREWING
1. To register your product, go to www.prodprotect.com/applica
2. Carefully unpack your coffeemaker, removing all packaging materials, labels, stickers
and the plastic band around the power plug.
3. Clean all removable parts of your coffeemaker in warm, soapy water. Rinse and dry
these parts prior to placing them back into your coffeemaker.
4. Clean the inside of your coffeemaker by running two full brewing cycles with water
only, no coffee.
a. Make sure your coffeemaker is plugged in.
b. Fill the entire water reservoir with fresh, cool water and place carafe onto the
carafe plate.
c. Press the Power button.
d. Once the cycle is finished, discard water.
e. Turn off appliance, unplug and allow to cool down for 15 minutes before repeating.
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.