BLACK & DECKER CHV7202 User Manual

When using electrical appliances, basic safety precautions should always be followed, including the following: PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE

USING THE UNIT.

WARNING: To reduce the risk of fire, electrical shock or injury:

• Close supervision is necessary when any appliance is used by or near children. Do not allow to be used as a toy.

• To protect against risk of electrical shock, do not put unit or charging base in water or other liquid.

• Do not use wet/dry hand vacs to pick up toxic substances, flammable or combustible liquids such as gasoline or use in areas where they may be present.

• Do not operate in the presence of explosives and/or flammable fumes or liquids.

• Do not operate any appliance with a damaged cord or charger or after the appliance malfunctions, is left outdoors, dropped into water or is damaged in any manner. Return the appliance to any authorized service facility.

• Do not use Dustbuster

wet/dry hand vac outdoors.

• Do not abuse the cord. Never carry the charger or base by the cord or yank to disconnect from an outlet; instead grasp the charger and pull to disconnect. Keep cord away from heated surfaces. Do not pull cord around sharp edges or corners.

• Do not allow the cord to hang over the edge of a table or counter or touch hot surfaces. The unit should be placed or mounted away from sinks and hot surfaces.

• Do not use an extension cord. Plug the charger directly into an electrical outlet.

• Use the charger only in a standard electrical outlet (120V/60Hz).

• Do not attempt to use the charger with any other product; do not attempt to charge this product with any other charger. Use only the charger supplied by the manufacturer to recharge.

• Keep hair, loose clothing, and all parts of body away from openings and moving parts.

• Do not insert accessories when unit is running.

• Do not handle plug or appliance with wet hands.

• Do not put any object into unit openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

• Do not vacuum burning or smoking materials, such as lit cigarette butts, matches or hot ashes.

• Do not use on or near hot surfaces.

• Use extra caution when cleaning on stairs.

• This appliance is intended for household use only and not for commercial or industrial use.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Unplug the charger from outlet before any routine cleaning or maintenance.

• This product includes rechargeable nickel cadmium batteries. Do not incinerate batteries as they will explode at high temperatures.

• Leaks from battery cells can occur under extreme conditions. If the liquid, which is a 20-35% solution of potassium hydroxide, gets on the skin (1) wash quickly with soap and water or (2) neutralize with a mild acid such as lemon juice or vinegar. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.

• The charger supplied with this product is intended to be plugged in such that it is correctly orientated in a vertical or floor mount position.

WARNING: Do not look into the air vents when the unit is switched on, as sometimes

there is a possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as debris inside the unit can be disturbed.

WARNING: Some household dust contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead based paint.

INSTALLATION INSTRUCTIONS (FIG. B)

The charging bracket can be mounted to most walls or left unattached on a flat surface. Fix the wall mount within reach of an electrical outlet. Mount securely into framing studs or wallboard using the hardware provided. Next plug power supply plug into nearby 120 volt electrical outlet. Ensure cord is not too tight so as to pull unit off wall mount.

WARNING: Do not mount the charging bracket directly over the 120 volt electrical outlet.

Excess water from the bowl could drip onto the outlet and create a hazard.

RECHARGING (FIG. C)

From new, the rechargable cells of the product need a minimum charge time of 16 hours to ensure full power. The switch must be in the off (“O”) position, the product will not charge if it is in any other position.

Make sure that the product is fully mounted on the charging bracket. There is an arrow on the charging base that must line up with the split of the dust bowl and the handle.

While charging, the product may get warm, this is perfectly normal and safe. It can remain on charge indefinitely without damage or danger. It is not possible to “overcharge” the battery cells with the charger provided.

OPERATION (FIG. D)

To start, slide the On/Off switch forward (i.e. “O”= Off, “I” = On). To stop, slide the switch back. For best performance on hard surface wet pickups, insert Squeegee into the Bowl Nozzle Opening. Do not fill the bowl beyond the end of the intake chute. If there is any liquid in the bowl, do not turn the unit upside down, sideways, point the nozzle upward, or shake the vac excessively. After picking up liquid substances clean the vac and filter immediately. Mold and mildew may form if the unit is not properly cleaned after wet pickups. Always return the product to the power supply immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged with the power supply plug.

CLEANING THE PRODUCT (FIGS . E-I)

WARNING: Never use the Dustbuster without its filters.

NOTE: The filters are re-usable, do not confuse them with disposable dust bags, and do not

throw them away when the product is emptied. We recommend that you replace the filters every 6-9 months depending on frequency of use.

FIG. E

• Remove the dust bowl by turning it counterclockwise slightly and pulling it away

from the handle. To replace the bowl, place it back onto the handle and twist it clockwise until it “clicks” firmly into position.

FIG. F

• Empty the dust from the bowl and wash if necessary (see Fig. H).

FIG. G • While holding the bowl over a wastebasket, pull out the foam filter and hard filter to empty the contents of the bowl.

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

How To Use

Product Features (Fig. A)

1. On/Off slide switch

2. Dust bowl

3. Wall mount

4. Power supply plug

5. Squeegee

6. Crevice tool

SAVE THESE INSTRUCTIONS

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZADE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Catalog Numbers CHV7202, CWV8400, CWV8402

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A

BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A

SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER.

HANK

YOU

FOR

CHOOSING

LACK

&&D

ECKER

OOTTOOWWW

WWW

LACKAND

ECKER

COM

WNER

TTOOREGISTER

YOUR

NEW

PRODUCT

CHV7202 CWV8400

CWV8402

FIG. H • Wash the filter regularly using warm, soapy water and ensure that it is completely dry before using it again. The cleaner the filters are, the better the product will perform. It is very important that the filter is correctly in position before use. The dust bowl can also be washed in warm soapy water. Ensure that it is dry before re-attaching.

IMPORTANT: Maximum dust collection will only be obtained with clean filters and an empty dust bowl. If dust begins to fall back out of the product after it is switched off, this indicates that the bowl is full and requires emptying.

FIG. I

• Never immerse the product in water. A damp cloth and soapy water should be used

to clean the exterior of the motor section. Always ensure the product is completely dry before re-use or storing.

ECONOMIC USAGE

• Your product is very economical to charge. While it is charging it uses less than half the amount of electricity used by a light bulb.

• When fully charged, the average effective usage times are between 8-10 minutes.

• It may take several chargings before these times can be achieved.

OTHER INFORMATION

If the product does not work, check the following:

• The power supply plug was correctly plugged in for recharge. ( It feels slightly warm to the touch.)

• The power supply plug is not damaged and is correctly attached to the base.

• The power supply plug is plugged into a working electrical outlet.

ACCESSORIES

Accessories are fitted into the nose of the product as shown in figure J. (Note: Only the loop handle design has accessory storage on board.)

BATTERY REMOVALAND DISPOSAL

NOTE: Once removed, the battery cannot be refitted.

This product uses nickel-cadmium (Ni-Cd) rechargeable and recyclable batteries. When the batteries no longer hold a charge, they should be removed from the Vac and recycled. They must be properly disposed of and not incinerated. The batteries can be taken for disposal to a Black & Decker, Company-Owned or Authorized Service Center. Some local retailers are also participating in a national recycling program (see “RBRC

Seal”). Call your local retailer for details. If you bring the batteries to a Black & Decker Company-Owned or Authorized Service Center, the Center will arrange to recycle old batteries. Or, contact your local municipality for proper disposal instructions in your city/town.

To remove the battery pack for disposal: (Fig. K)

WARNING: Disconnect the appliance from the power supply before removing the battery.

Discharge the battery by operating the appliance until the motor stops. Remove the screws from the appliance housing. Open the appliance and remove the battery, the attached motor and switch module. Use a screwdriver to detach the battery from the motor and switch module – do not switch on. Place the battery in suitable packaging to ensure that the terminals cannot be shortcircuited. If the batteries have leaked or vented, protective gloves should be worn before touching the casing. IMPORTANT: DO NOT remove the batteries from inside the plastic casing. Do not replace with any batteries other than those supplied by Black & Decker.

MAINTENANCE

Use only mild soap and damp cloth to clean the vac. Never let any liquid get inside the vac; never immerse any part of the vac into a liquid.

NOTE: Make sure the vacuum is completely dry before using it. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

THE RBRC™ SEAL

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickelcadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

REPLACEMENT FILTERS

For replacement filters use Cat. No. WFOPP1

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call:

1-800-544-6986 or visit www.blackanddecker.com

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required.Black & Decker owned and authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phone directory. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Lorsqu’on utilise un appareil électrique, il faut toujours respecter certaines règles de sécurité fondamentales, notamment les suivantes.

LIRE ATTENTIVEMENT TOUTES LES DIRECTIVES AVANT D’UTILISER L’APPAREIL.

AVERTISSEMENT : Afin de minimiser les risques d’incendie, de secousses

électriques ou de blessures.

• Exercer une étroite surveillance lorsqu’on utilise l’appareil près d’un enfant ou que l’appareil est utilisé par ce dernier. Il ne s’agit pas d’un jouet.

• Afin d’éviter les risques de secousses électriques, ne pas immerger l’appareil ni son chargeur.

• Ne pas se servir d’un aspirateur portatif pour déchets secs ou humides pour aspirer des substances toxiques, des liquides inflammables ou combustibles (de l’essence, par exemple), ni s’en servir dans un endroit renfermant de tels produits.

• Ne pas se servir de l’appareil en présence de vapeurs explosives ou inflammables.

• Ne pas utiliser un appareil dont le cordon ou le chargeur est endommagé, ni un appareil qui ne fonctionne pas bien, qui est tombé, endommagé, resté à l’extérieur ou a été immergé. Le confier à un centre de service autorisé.

• Ne pas se servir de l’aspirateur portatif Dustbuster® destiné à des déchets secs ou humides à l’extérieur.

• Manipuler le cordon avec soin. Ne jamais transporter le chargeur ni le socle par le cordon ni tirer sur le cordon pour le débrancher. Saisir plutôt la fiche et tirer dessus. Éloigner le cordon des surfaces chaudes. Ne pas tirer sur le cordon lorsqu’il est autou

d’un coin ou d’un rebord tranchant.

• Ne pas laisser pendre le cordon d’une table ou d’un comptoir, ni le laisser entrer en contact avec une surface chaude. Placer ou installer l’appareil loin des éviers ou des surfaces chaudes.

• Ne pas utiliser de cordon de rallonge. Brancher le chargeur directement dans une prise.

• Brancher le chargeur seulement dans une prise standard (120 V, 60 Hz).

• Ne pas utiliser le chargeur avec un autre appareil; ni tenter de charger le produit avec un autre chargeur. Utiliser seulement le chargeur fourni par le fabricant.

• Éloigner les cheveux, les vêtements amples et les membres du corps des orifices et des pièces mobiles de l’appareil.

• Ne pas installer d’accessoires lorsque l’appareil fonctionne.

• Ne pas manipuler la fiche ni l’appareil avec les mains mouillées.

• Ne pas insérer d’objets dans les ouvertures del’appareil. Ne pas utiliser l’appareil lorsqu’une de ses ouvertures est bloquée. Enlever la poussière, la charpie, les cheveux et toute autre matière

susceptible de réduire le débit d’air.

• Ne pas faire fonctionner l’appareil sans filtre. Remplacer sans tarder le filtre s’il est endommagé.

• Ne pas se servir de l’appareil pour aspirer dessubstances en combustion, comme des mégots allumés, des allumettes ou des cendres chaudes provenant d’un foyer.

• Ne pas utiliser l’appareil sur des surfaces chaudes ni près de celles-ci.

• Faire preuve de prudence lorsqu’on nettoie les escaliers.

• L’appareil est conçu pour une utilisation domestique seulement et non industrielle ou commerciale.

• Utiliser l’appareil seulement de la manière décrite dans le présent guide. Utiliser seulement les accessoires recommandés par le fabricant.

• Débrancher le chargeur avant de le nettoyer.

• L’appareil renferme des piles rechargeables au nickel-cadmium. Ne pas incinérer les piles. La chaleur des flammes peut les faire exploser.

• Il peut se produire une légère fuite du liquide excitateur des piles dans des conditions extrêmes. Toutefois, si ce liquide (solution d’hydrogène de potassium à 20-35 p. 100) atteint la peau, il faut : 1) laver immédiatement à l’eau et au savon ou 2) neutraliser à l’aide d’un acide doux comme du jus de citron ou du vinaigre. Si le liquide excitateur atteint les yeux, rincer immédiatement à l’eau claire pendant au moins dix minutes et consulter un médecin.

• Le chargeur fourni avec ce produit est correctement branché s’il est orienté en position verticale ou au plancher.

AVERTISSEMENT : Ne pas regarder dans les évents lorsque l’appareil est en marche,

car il arrive parfois que de petits débris s’en échappent, surtout après un nettoyage ou un remplacement de filtre qui aurait tendance à les libérer.

AVERTISSEMENT : Certaines poussières domestiques contiennent des produits

chimiques reconnus par l’État de la Californie comme étant cancérogènes et pouvant entraîner des anomalies congénitales et d’autres risques pour la reproduction tels que l’amiante et le plomb contenu dans les peintures au plomb.

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

IMPORTANTES MISES EN GARDE

CONSERVER CES DIRECTIVES

1. Interrupteur à glissière marche/arrêt 4. Fiche d’alimentation

2. Réservoir à poussière 5. Raclette

3. Support mural 6. Suceur plat

DIRECTIVES D’INSTALLATION (FIG. B)

Le support de charge s’installe sur la plupart des murs ou se dépose sur une surface plane, sans fixation. Fixer le support mural à proximité d’une prise électrique. Le fixer solidement aux montants de charpente ou à un panneau mural avec la quincaillerie fournie. Par la suite, brancher la fiche d’alimentation dans la prise électrique de 120 volts à proximité. S’assurer que le cordon d’alimentation n’est pas trop tendu au point où l’appareil risque de sortir du support mural.

AVERTISSEMENT : ne pas fixer le support de charge directement au-dessus d’une prise

électrique de 120 volts. En effet, l’eau excédentaire du réservoir risquerait de couler dans la prise, ce qui s’avèrerait dangereux.

RECHARGEMENT (FIG. C)

Les piles rechargeables neuves de ce dispositif doivent être chargées pendant au moins 16 heures afin d’assurer une puissance maximale. Pour le rechargement, placer l’interrupteur à

Caractéristiques du produit (fig. a)

Mode d’emploi

N° de catalogue CHV7202, CWV8400, CWV8402

AVANT DE RETOURNER CE PRODUIT POUR QUELQUE

RAISON QUE CE SOIT, COMPOSER LE

1-800-544-6986

AVANT D’APPELER, AYEZ EN MAIN LE N° DE CATALOGUE ET LE CODE DE DATE. DANS LAPLUPARTDES

CAS, UN REPRÉSENTANT DE BLACK & DECKER PEUT RÉSOUDRE LE PROBLÈME PAR

TÉLÉPHONE. SI VOUS AVEZ UNE SUGGESTION OU UN COMMENTAIRE, APPELEZ-NOUS. VOS

IMPRESSIONS SONT CRUCIALES POUR BLACK & DECKER.

ERCI

ERCIDD

’

AAVOIR

VOIR

CHOISI

LACK

& D

ECKER

ISITEZ

WWW

LACKAND

ECKER

COM

WNER

POUR

ENREGISTRER

VOTRE

NOUVEAU

PRODUIT

CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR.

MODE D’EMPLOI

Troubleshooting

Problem Possible Cause

Possible Solution

• Unit will not start. • Battery not charged. • Check battery charging requirements.

• Battery will not charge. • Charger not plugged in. • Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.

• Check current at receptacle by plugging in a lamp or other appliance.

• Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

• Surrounding air • Move charger and tool to a temperature too hot or surrounding air temperature of too cold. above 40 degree F(4,5°C)

or below 105 degree F (+40,5°C).

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

+ 2 hidden pages