Black & Decker BX390, BX385 User Manual

0

P

1

2

www.blackanddecker.ae

BX385 / BX390

ENGLISH

Parts Identification

A. Filler Cap

B. Lid

C. Pouring spout

D. Blender jug

E. Blender body

F. Control knob

G. Grinder Blade

H. Grinder seal

I. Grinder jug

J. Mincer blade

(BX390 Only)

K Mincer Seal

(BX390 Only)

L. Mincer jug

(BX390 Only)

2

ENGLISH

Intended use

Your Black & Decker blender has been designed
for blending, mixing and crushing of solid and
liquid food and beverage ingredients. This
product is intended for indoor household use
only.

Read this entire manual carefully
before using the appliance.

Safety instructions

• Warning! When using mains-powered
appliances, basic safety precautions,
including the following, should always be

followed to reduce the risk of fire, electric

shock and personal injury.

• The intended use is described in this manual.

The use of any accessory or attachment or
the performance of any operation with this
appliance other than those recommended in
this instruction manual may present a risk of
personal injury.

• Retain this manual for future reference.

Using your appliance

• Always take care when using the appliance.

• Never pull the power supply cord to

disconnect the plug from the socket. Keep
the power supply cord away from heat, oil
and sharp edges.

Do not place the appliance on or near heat

sources or in a heated oven.

• Do not use the appliance outdoors.

• Always protect the motor unit from water or

excessive humidity.

• If the power supply cord is damaged during

use, disconnect the appliance from the power
supply immediately. Do not touch the power
supply cord before disconnecting from the
power supply.

• Disconnect the appliance from the power
supply when not in use, before fitting or

removing parts and before cleaning.

• Never let the appliance operate unattended.

• Never reach into the jar with your fingers or

an object while the appliance is running.

• Only remove the jar after you have switched

the appliance off and any moving parts have
stopped.

• Do not touch the cutting blades.

• Keep any loose clothing or long hair away

from the feeding tube and any moving parts.

• Care shall be taken when handling the sharp

cutting blades, emptying the bowl and during
cleaning.

• Do not immerse the appliance, cord set or

plug in liquids.

Safety of others

• This appliance is not intended for use by

persons (including children) with reduced
physical sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

3

ENGLISH

After use

• Remove the plug from the socket before

leaving the appliance unattended and before
changing, cleaning or inspecting any parts of
the appliance.

• When not in use, the appliance should be

stored in a dry place. Children should not
have access to stored appliances.

Inspection and repairs

• Switch off the appliance before cleaning,

changing accessories or approaching parts
which move in use

• Before use, check the appliance for

damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.

• Do not use the appliance if any part is

damaged or defective.

• Do not use the appliance if the blade is

damaged.

• Never attempt to remove or replace any parts

other than those specified in this manual.

Electrical safety

Before use, check that the mains voltage
corresponds to the voltage on the rating plate.

This appliance is double insulated in
accordance with EN 60335-2-14;
therefore no earth wire is required.

• To avoid the risk of electric shock, do not

immerse the cord, plug or motor unit in water
or other liquid.

• Check that the supply voltage shown on the

rating plate of the appliance matches that of
your electrical system. Any connection error
will invalidate the guarantee.

Mains plug replacement

If a new mains plug needs to be fitted:

• Safely dispose of the old plug

• Connect the brown lead to the live terminal of

the new plug

• Have any damaged or defective parts

repaired or replaced by an authorised repair
agent.

• Before use, check the power supply cord for

signs of damage, ageing and wear.

• Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

• If the power supply cord or mains plug is

damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.

4

• Connect the blue lead to the neutral terminal

• If the product is class I (earthed), connect the

green/yellow lead to the earth terminal

Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal

• Follow the fitting instructions supplied with

good quality plugs

• Any replacement fuse must be of the same

rating as the original fuse supplied with the
product

ENGLISH

Assembly

1. Wash all detachable parts (see chapter
‘Maintenance and cleaning’).

2. Fit the grinder seal (H) into the groove
around the edge of the grinder blade (G).

3. Fit the mincer seal (K) into the groove around
the edge of the mincer blade (J).

4. Secure the blade holder (G or J) into the
required jug by pushing it into the jug and
turning it clockwise.

5. Fit the blender jug (D), grinder jug (I) or
mincer jug (L) to the blender body (E) by
turning it anti-clockwise.

Use

1. Place the appliance on a flat, stable surface.

2. Put the ingredients into the required jug (C).

3. If using the blender push the lid (B) and filler
cap (A) onto the jug (D). The filler cap is

secured by turning it clockwise.

4. If using the grinder or mincer seal the jug by

fitting the required blade (G or J) and secure

by turning clockwise.

5. Place the jug (D, I or L) onto the blender
body (D).

6. Secure the jug (D, I or L) by turning it anti
clockwise.

7. Connect it to the electrical supply and select
the required speed using the rotary switch.

The following settings are available:-

The appliance should be disconnected
from the mains supply before removing
the jug.

Reccomendations when
blending

Ingredients Max Run Time Speed Max Quantity
(Seconds) (ml)

Liquids 20 sec 1 50g

Semi Liquids * 10 sec 2 50g

*Semi Liquids assumes maximum of 250 grams
of fruits, vegetables or ice in 2.5x2.5 cm cubes
along with 500 ml of water or any other liquid of
similar consistency.

Note: The blender should not be run for longer
than 1 minute. After a continuous run of 1
minute, the blender should be allowed to cool
down for at least 2 minutes before further use.

Reccomendations when
grinding

Ingredients Max Run Time Speed Max Quantity
(Seconds) (g)

Dry Pepper/
Coffee beans

Dry Pulses 30 sec 1 50g

Dry Herbs 20 sec 1 50g

Note: The dry grinder should not be
continuously run for longer than 40 seconds.

20 sec 2 60g

P = Pulse Operation
O = Power Off
1 = Low Speed
2 = High Speed

Warning! The grinder should NOT be used for
wet grinding of hard food materials like pulses,
beans, grains etc. This will lead to damage of
blades and reduction of motor life span.

5

ENGLISH

Reccomendations when
mincing (BX390 Only)

Ingredients Max Run Time Speed Max Quantity
(Seconds) (g)

Meat 20 sec 1 50g

Cheese * 10 sec 2 50g

* The mincer should only be used for very hard
cheeses such as parmesan.

Note: The mincer should not be continuously
run for longer than 40 seconds.

Useful advice

Note: Do not exceed the maximum capacity of

1.5 litres.

• When blending is complete return the control

knob to the off (0) position.

• Once the blade has come to a complete

stop, lift the jug (D) from the blender body (I).

• Remove the lid (B) and pour the ingredients

into a suitable container.

• Liquids can be poured through the pouring

spout (C) by lifting the spout cover.

Note: Ingredients can be added by inserting

them through the hole left when the filler cap (A)

is removed.

Warning! Never operate the Blender without
the lid (B) fitted.

Warning! Do not use any of the accessories

with out the required seal.

Maintenance & cleaning

• The appliance is easier to clean if you do so

immediately after use.

• Do not use abrasive cleaning agents,

scourers, acetone, alcohol etc. to clean the
appliance.

• All detachable parts are dishwasher-safe.

• Place the detachable plastic parts on the top

tray of the dishwasher. Make sure they are
placed well away from the heating element.

• All removable parts can be cleaned with a

cleaning brush in warm water with some

washing-up liquid and rinse them under the

tap.

• Remove the dirty parts from the motor unit.

Clean the motor unit with a damp cloth.

• Never immerse the motor unit in water nor

rinse it under the tap.

Technical data

BX385, BX390

Voltage 220 – 240 Volts

Supply 50 Hz

Power consumption 400W

Weight (BX385) 2 kg

Weight (BX390) 2.5 kg

• Switch the appliance off, remove the plug

from the wall socket and wait until the blade
has stopped rotating.

6

ENGLISH

Protecting the environment

Separate collection. This product must not

be disposed of with normal household
waste.

Should you find one day that your Black &
Decker product needs replacement, or if it is of
no further use to you, do not dispose of it with
other household waste. Make this product

available for separate collection.

• Black & Decker provides a facility for

recycling Black & Decker products once they
have reached the end of their working life.

This service is provided free of charge. To

take advantage of this service please return

your product to any authorised repair agent
who will collect them on our behalf.

• You can check the location of your nearest

authorised repair agent by contacting your

local Black & Decker office at the address
indicated in this manual. Alternatively, a list of
authorized Black & Decker repair agents and

full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.

Warranty

Black & Decker is confident of the quality of its

products and offers an outstanding warranty.

This warranty statement is in addition to and in
no way prejudices your statutory rights.

The warranty is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.

If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker warranty to replace
defective parts, repair products subjected to fair

wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:

The product has been used for trade,

professional or hire purposes;

The product has been subjected to misuse

or neglect;

The product has sustained damage

through foreign objects, substances or

accidents;

Repairs have been attempted by persons

other than authorised repair agents or

Black & Decker service staff.

To claim on the warranty, you will need to submit
proof of purchase to the seller or an authorised

repair agent. You can check the location of your

nearest authorised repair agent by contacting

your local Black & Decker office at the address

indicated in this manual.

Alternatively, a list of authorised Black & Decker

repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com.

7