Black & Decker BL6010 User Manual

DIGITAL BLENDING SYSTEM SISTEMA DE LICUADO DIGITAL
Use & Care Manual BL6010
TM
Should you have any questions or concerns with your new
CONTROL PANEL, please call our Customer Service Line at
1-800-231-9786 (US and Canada).
Please do not return to the store.
2
PLEASE READ AND SAVE THIS USE AND CARE BOOK.
IMPORTANT SAFEGUARDS.
When using electrical appliances, always follow basic safety precautions to reduce the risk of fire, electric shock, and/or injury, including the following:
• Read all instructions.
• Unit has a motor protection system. If the indicator blinks rapidly, unplug & let cool. Plug back in to restart
• To protect against risk of electrical shock, do not put blender base, cord or plug in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before assembly/ disassembly and before cleaning.
• Avoid contacting moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact the consumer service number listed in this manual.
• The use of attachments, including canning jars, not recommended by the appliance manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let cord hang over the edge of table or counter, or touch with hot surfaces.
• Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place cutter assembly blades on base without the jar properly attached.
• Always operate blender with cover in place.
• When blending hot liquids, remove the lid cap from the lid. Do not blend hot liquids in the personal blender jar.
• Do not use appliance for other than intended use.
• Do not place on or near a hot gas or electric burner or in a heated oven
• The maximum rating is based on the blender jug attachment. The power input of the optional personal jar or herb jar is less than the allowable deviation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
SAFETY FEATURES
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAM PER-R ESISTANT SCREW
Warning: This appliance is equipped
with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
A short power-supply cord is provided to
1) reduce the risk resulting from becoming entangled in or tripping over a longer cord.
2) Longer detachable power cords or extension cords are available and may be used if care is exercised in their use.
3) If a long detachable power-supply cord or extension cord is used,
a) The marked electrical rating of the
extension cord should be at least as great as the electrical rating of the appliance,
b) If the appliance is of the grounded
type, the extension cord should be a grounding-type 3-wire cord, and
c) The longer cord should be arranged so
that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
Note: If the power cord is damaged, please contact the warranty department listed in these instructions.
3
Congratulations on your new Performance FusionBlade™ Digital Blending System! Designed for premium food prep and culinary excellence, your new performance blender will help you crush, create, blend, chop, mix & prep. Enjoy!
1
GETTING TO KNOW YOUR
PERFORMANCE FUSIONBLADE
DIGITAL BLENDING SYSTEM
9
8
7
10
2
3
4
5
6
1. Lid cap (Part# BL6010-01)
2. Easy-off lid (Part# BL6010-02)
3. Handle
4. One-piece Tritan
blender jar
(Part# BL6010-03)
5. Integrated blade (non removable)
6. Base
7. Digital Control Panel
* Trita n
is a trademark of Eastman Chemical Company, or one of its subsidiaries.
8. Personal blender jar (Part# BL1130-08)
9. Drinking lid attachment (Part# BL1130-07)
10. Personal jar blade assembly (Part# BL1130-09 ) Note: additional personal jars can be purchased separately at
BlackAndDeckerAppliances.com
4
HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING section of this manual.
USING YOUR BLENDER
1. Make sure appliance is OFF and the jar is securely situated on the base.
2. Place foods to be blended into the jar. Do not fill past the 64 oz marking.
Note: when blending hot ingredients, only fill jar 2/3 full (A)
3. Place lid securely on jar; make sure lid cap is in place.
4. Plug power cord into outlet. Press ON/OFF button (B). The button will illuminate, indicating blender is in STANDBY mode. Note: if no buttons are pressed within 60 seconds, the unit will automatically power off.
5. Press the desired speed button to start the blender, or select AUTO plus the speed button (#1-5) of desired pre-programmed cycle. The LED will blink slowly when in use. (See AUTO FUNCTIONS and SPEED CHART). When food reaches desired consistency, press PULSE/ STOP button to stop blending. (C)
Note: When in use, do not leave blender unattended.
6. When using the PULSE button, press and hold the PULSE button several seconds then release. Repeat until food reaches desired consistency. Releasing pulse stops the blending and the unit returns to STANDBY.
Important: Do not hold speed or pulse buttons down when blending. Holding the button for longer than 30 seconds will cause an error. Unplug the unit to reset.
7. Remove the lid cap and drop ingredients through the lid cap opening while the blender is running (D). When blending hot liquids, remove lid cap and cover opening with towel to prevent hot liquids from splattering.
5
Important: Do not remove the lid while the blender is running.
8. When finished press ON/OFF or PULSE/STOP
to stop blending (E). Make sure blades have completely stopped before attempting to remove the blending jar from the base. (Refer to troubleshooting for any issues).
9. Press ON|OFF to power off. Unit will auto shutoff
after 60 seconds without use.
10. To remove the jar, grasp the handle and lift up.
11. Remove lid to pour.
12. Always unplug the appliance when not in use.
USING THE PERSONAL BLENDER JAR
(NOT INCLUDED WITH ALL MODELS) Note: Do not blend hot liquids in the personal jar.
1. Place the personal blender jar on a flat surface with the open end facing up. Fill the jar with ingredients. Do not fill ingredients past the “20oz.” marking.
Note: For best results, add ingredients in the following order:
a. Liquids b. Ice c. Hard Foods d. Soft Foods e. Powders
2. Tighten the personal jar blade assembly on the open end of the personal jar with the blade facing down towards the ingredients. It is important to tighten to prevent leaking during blending.
3. Turn personal jar upside down and place on the blender base, turning clockwise to lock into place.
4. Select the appropriate speed or use PULSE to blend to desired consistency. IMPORTANT: It is recommended to only use speeds 1-3 or AUTO 3 when using the
personal jar.
6
5. Once blending has finished, remove the personal jar by turning counterclockwise and lifting off the base. Turn the jar over and place it on a flat surface.
IMPORTANT: If the jar gets stuck on the blending base or begins to loosen from the blade assembly, follow these steps:
a. Unplug the unit b. Turn the jar clockwise to tighten jar onto the blade assembly c. Turn jar and blade assembly counterclockwise to unlock from blending base and lift up.
6. Remove the blade assembly from the personal jar by turning counterclockwise. Place the personal jar drinking lid on the personal jar and enjoy your delicious drinks on the go.
AUTO FUNCTIONS
This blender features 5 different AUTO functions, pre-programmed cycles to deliver exceptional results for a wide variety of recipes. To use an AUTO function:
1. Press AUTO. Once pressed, all numbered buttons will blink
2. Press the button of the desired function as listed in the chart below:
AUTO
1 2 3 4 5
number
Meal
Description
Tips
Soup Nut
Puree perfectly creamy soups
When blending hot liquids, do not fill blender jar more than 2/3 full to allow for expansion during blending and to prevent splattering.
Butters
Cream smooth or chunky nut butters
Do not exceed 3 cups of nuts or use less than 2 cups when making nut butters.
Personal Jar / Half Recipes
Use with personal jar (not included with all models) or when making a smaller recipe/ serving
Do not fill past the 20oz. mark. For best results using personal jar, add ingredients in the following order: liquids, ice, hard foods, soft foods, powders.
Dry Goods Smoothies
Grind and chop dry ingredients
When blending dry goods, do not exceed 2 cups volume. Place dry goods (rice, corn) in freezer 15 minutes prior to blending to prevent overheating.
Blend frozen fruits and ingredients into a thick consistency
For best results using full size blender jar, place ingredients in the following order: Liquids, powders, soft foods, hard foods, ice.
Note: When blending dry goods, you may experience abrasions on the inside of the jar, making it cloudy. This is not preventable but is normal and will not impact the performance of the blender.
7
SPEED CHART
Function Food Type Speed Setting
Puree Fruits and Vegetables
Crumb Bread crumbs
Mix Dressings
Chop Salsa
Ice Crush / Frozen Blend
Soups Baby Food Milkshakes
Cereals Cookies
Batters Dips
Nuts Vegetables
Ice (max 2 cups) Frozen Fruits
Speeds 1 - 5
Pulse to desired consistency
Speeds 1 – 3
Pulse to speed 2 or desired consistency
Pulse to speed 5
Blend/ Smoothies
Grind/Flours Rice
Nut Butters Peanuts
Personal Jar Recipes
Smoothies Fruits Vegetables
Corn Oats Grains
Almonds Walnuts Cashews
Half Recipe/ Use with Personal Jar (not included with all models)
Pulse to speed 5
Speeds 1-3
Pulse until desired texture reached
Speeds 1 - 3
HELPFUL HINTS & TIPS
• When using hard foods, such as ice or cheese, keep one hand on the lid
to keep blender jar and base in place.
• Cut food into pieces no larger than 3/4” before blending.
• When ingredients splatter onto the sides of the jar or the mixture is very
thick, turn the appliance off. Remove the lid and use a rubber spatula to scrape down the sides of the jar and to redistribute the food, pushing food toward the blades. Replace the lid and continue blending.
• The lid cap holds up to 2 oz. of liquid and can be used as a measure when
adding ingredients such as oil, milk, cream or liquor.
• When making bread, cookie, cereal, or cracker crumbs, make sure
blending jar is completely dry.
• When using the PULSE function, use short bursts. Allow the blades
to stop rotating between pulses. Do not use PULSE for more than 30 seconds continuously.
• It is helpful to begin the blending process on the lowest speed and then
increase to a higher speed, if necessary.
• Never operate the blender without the lid.
8
• To stop blending at any time, press the PULSE|STOP or ON | OFF button.
• When blending hot ingredients, always let them cool at least 5 minutes
before blending. Begin blending on the lowest speed with the lid cap off to allow steam to escape. Cover lid cap hole with towel or hot pad.
• When crushing ice with no other ingredients, use 2 cups ice max (about 15
cubes). Make sure blender jar is completely dry before ice crushing.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
• Unplug the blender base before cleaning. Wipe the blender base using a
damp cloth. Do not immerse the blender base in water.
• Lift the blending jar, by the handle, off the base.
• Remove lid and lid cap.
• Wash removable parts by hand or in the dishwasher. Place the jar on the
bottom rack and the rest of the parts on the top rack only.
Caution: Blades are sharp. Handle with care when hand washing.
CLEANING TIPS:
• For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap
in the blending jar.
• Place lid with lid cap securely on jar and blend on speed 3 for about 30
seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note: If liquids spill onto the base, wipe with a damp cloth and dry
thoroughly. Do not use rough scouring pads or cleansers on parts or finish.
TROUBLESHOOTING
Problem Possible Cause Solution
All LEDs blinking quickly (100 msec/time)
Blender stops/ goes into STANDBY mode
Blender is having difficulty blending
Blender overheated or button held longer than 30 seconds.
Blending time exceeds
2.5 minutes.
Mixture is too thick or air bubble has formed between mixture & blade.
9
Unit must be reset. Unplug to reset. Let unit cool for at least 20 minutes.
Re-select appropriate speed setting to start blender.
Turn blender off. Use rubber spatula to scrape down sides of jar and redistribute, pushing food towards blades. Add more liquid if needed.
Loading...
+ 19 hidden pages