Black & Decker Bl300 Instruction Manual

Powerful Solutions

BL300

English (Original Instructions)

Intended use

Your Black & Decker blender has been designed for blending, mixing and crushing of solid and liquid food and beverage ingredients. This product is intended for indoor household use only.

Read this entire manual carefully before using the appliance.

Safety instructions

 Warning! When using mains-powered

appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury.

 The intended use is described in this manual.

The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

 Retain this manual for future reference.

Using your appliance

 Always take care when using the appliance.  Never pull the power supply cord to disconnect

the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.

 Do not place the appliance on or near heat

sources or in a heated oven.

 Do not use the appliance outdoors.  Always protect the motor unit from water or

excessive humidity.

 If the power supply cord is damaged during

use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

(Original Instructions) English

 Disconnect the appliance from the power

supply when not in use, before fitting or removing parts and before cleaning.

 Never let the appliance operate unattended.  Never reach into the jar with your fingers or an

object while the appliance is running.

 Only remove the jar after you have switched

the appliance off and any moving parts have stopped.

 Do not touch the cutting blades.  Keep any loose clothing or long hair away from

the feeding tube and any moving parts.

 Care shall be taken when handling the sharp

cutting blades, emptying the bowl and during cleaning.

 Do not immerse the appliance, cord set or plug

in liquids.

Safety of others

 This appliance is not intended for use by

persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

 Children should be supervised to ensure that

they do not play with the appliance.

After use

 Remove the plug from the socket before

leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

 When not in use, the appliance should be

stored in a dry place. Children should not have access to stored appliances.

Inspection and repairs

 Switch off the appliance before cleaning,

changing accessories or approaching parts

which move in u

English (Original Instructions)

 Before use, check the applian

or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

 Do not use the appliance if any part is

damaged or defective.

 Do not use the appliance if the blade is

damaged.

 Have any damaged or defective parts repaired

or replaced by an authorised repair agent.

 Before use, check the power supply cord for

signs of damage, ageing and wear.

 Do not use the appliance if the power supply

cord or mains plug is damaged or defective.

 If the power supply cord or mains plug is

damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.

 Never attempt to remove or replace any parts

other than those specified in this manual.

e for damaged

Electrical safety

Before use, check that the mains voltage corresponds to the voltage on the rating plate.

This appliance is double insulated in accordance with EN 60335-2-14; therefore no earth wire is required.

 To avoid the risk of electric shoc

immerse the cord, plug or motor unit in water or other liquid.

 Check that the supply voltage shown on the

rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee.

k, do not

Assembly

1. Wash all detachable parts (see chapter

‘Maintenance and cleaning’).

2. Fit the jug seal (E) into the blade holder (G).

3. Place the blade holder (G) into the jug base

(D).

4. Secure the blade holder (G) by turning it anti

clockwise.

Use

1. Place the appliance on a flat, stable surface.

2. Put the ingredients into the jug (C).

3. Push the lid (B) and filler cap (A) onto the jug

(C).

4. Place the jug (C) onto the blender body (I).

5. Secure the jug (C) by turning it anti

clockwise.

6. Connect it to the electrical supply and select

the required speed using the rotary switch.

The following settings are available:- P = Pulse Operation O = Power Off 1 = Low Speed 2 = High Speed

The appliance should be disconnected

from the mains supply before removing the jug.

The Blender should not be run for longer than 60 seconds. After 5 consecutive runs of 60 seconds use, the blender should be allowed to cool for at least 60 minutes before further use.

Useful advice

 Place the appliance on a clean, flat work

surface.

 Add the ingredients to the jug (C) then fit the lid

(B) and filler cap (A).

Note: Do not exceed the maximum capacity of

1.5 litres.  Connect the appliance to a suitable electrical

supply. Rotate the control knob (J) to the required speed.

 When blending is complete return the control

knob to the off (0) position.

 Once the blade (F) has come to a complete

) from the blender body (I).

stop, lift the jug (

 Remove the lid (B) and pour the ingredients

into a suitable container.

Note: Ingredients can be added by inserting them through the hole left when the filler cap (A) is removed.

Warning! Never operate the Blender without the lid (B) fitted.

Maintenance & cleaning

 Switch the appliance off, remove the plug from

the wall socket and wait until the blade has stopped rotating.

 The appliance is easier to clean if you do so

immediately after use.

 Do not use abrasive cleaning agents, scourers,

acetone, alcohol etc. to clean the appliance.

 All detachable parts are dishwasher-safe.  Place the detachable plastic parts on the top

tray of the dishwasher. Make sure they are placed well away from the heating element.

(Original Instructions) English

 All removable parts can be cleaned with a

cleaning brush in warm water with some washing-up liquid and rinse them under the tap.

 Remove the dirty parts from the motor unit.

Clean the motor unit with a damp cloth.

 Never immerse the motor unit in water nor

rinse it under the tap.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.  Black & Decker provides a facility for recycling

Black & Decker products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

 You can check the location of your nearest

authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorized Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

Technical data

Voltage 220 – 240 Volts Supply 50 – 60 Hz Power consumption (Speed I) Power Consumption (Speed II) Weight 1.5 kg

200W

300W

English (Original Instructions)

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

 The product has been used for trade,

professional or hire purposes;

 The product has been subjected to misuse

or neglect;

 The product has sustained damage through

foreign objects, substances or accidents;

 Repairs have been attempted by persons

other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

+ 14 hidden pages