Should you have any questions or concerns with your new product,
please call our Customer Service Line at 1-800-465-6070 (US and
Canada). Please do not return to the store.
Si usted tiene alguna inquietud o pregunta con su producto, por
favor llame a nuestra línea de servicio al cliente una atención
inmediata 1-800-465-6070 (EE.UU/Canadá) 01-800-714-2503
(México). No devuela a la tienda.
2
Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS.
When using electrical appliances, basic safety precautions should always be
followed including the following:
• Read all instructions.
• To protect against risk of electrical shock do
not immerse cord, plugs or appliance in water
or other liquid.
• Close supervision is necessary when any
appliance is used by or near children.
• Unplug from outlet when not in use, before
putting on or taking off parts, and before
cleaning.
• Avoid contacting moving parts.
• Do not operate appliance with a damaged cord
or plug, or after the appliance malfunctions or
has been dropped or damaged in any manner.
Contact Consumer Support at the toll-free
number listed in the warranty section. This
appliance has important markings on the plug
blade. The attachment plug or entire cordset
(if plug is molded onto cord) is not suitable for
replacement. If damaged, the appliance must
be replaced.
• The use of attachments, including canning jars,
not recommended by the manufacturer may
cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or
counter.
• Keep hands and utensils out of container while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper
may be used, but must be used only when the
blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place cutterassembly blades on base without jar properly
attached.
• Always operate blender with cover in place.
• Do not blend hot foods/liquids.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent
removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt
to remove the outer cover. There are no user-serviceable parts inside. Repair should
be done only by authorized service personnel.
ELECTRICAL CORD
a) A short power-supply cord is provided to reduce the risks resulting from becoming
entangled in or tripping over a longer cord.
b) Extension cords are available and may be used if care is exercised in their use.
c) If an extension cord is used:
1) The marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord; and
3) The cord should be arranged so that it will not drape over the counter top or
tabletop where it can be pulled on by children or tripped over.
Note: If the power cord is damaged, please contact the warranty department listed
in these instructions.
3
GETTING TO KNOW
YOUR BLENDER
2
3
1
4
5
1. Dual-opening lid
(Part# BL2110-01)
2. Pour spout
3. Ingredient slot
4. Blending jar (Part# BL2110-02)
5. Handle
6. Blade assembly
(Part# BL2110-03)
7. Gasket
78
10
11
12
8. Jar base
(Part# BL2110-04)
9. Blender Base
10. Pulse/OFF button
11. LO button
12. HI button
13. Speed buttons
6
9
13
Product may vary slightly from what is illustrated.
4
HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers from the product, and the
plastic band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your
warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the gasket against the glass jar.
Important: Gasket MUST be between the jar and blade
assembly or the blender will not function properly.
3. Place the blade assembly, blade first, into the jar. (A).
4. Place jar base onto jar and rotate clockwise until it is
tight (B).
5. Turn assembled jar right side up.
6. Place lid onto blending jar.
Note: Do not plug in the cord.
7. Place on base, making sure it is pressed firmly
into place. (Jar base should not extend more than 1⁄8-inch above the rim
at the top of the base.)
A
B
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
3. Place lid on jar. Make sure the pour spout and ingredient slot are closed.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task.
(See SPEED CHART)
Note: Use PULSE for no more than five seconds at a time, allowing the blender to rest briefly between each pulse, no more than two minutes total. This
helps break up the ice and distribute the ingredients.
5
6. Open the
blender is running. Drop ingredients through the
opening. (C).
Important: Do not remove the lid while the blender is
running.
7. When finished, press the OFF button. Make sure
blades have completely stopped before attempting
to remove the blending jar from the base.
8. To remove the jar, grasp the handle and lift up.
9. Open pour spout to serve.
Note: Always unplug the appliance when not in use.
ingredient slot
to add ingredients while the
C
BLENDING TIPS AND TRICKS
• Cut food into pieces no larger than ¾" for use in the blender.
• When preparing foods that have several different kinds of ingredients,
always add liquid ingredients first.
• When ingredients splatter onto the sides of the jar or the mixture is
very thick, press the OFF button to turn appliance off. Remove the lid
and use a rubber spatula to scrape down the sides of the jar and to
redistribute the food, pushing food toward the blades. Replace the lid
and continue blending.
• When making bread crumbs make sure blender jar is completely dry.
• When using PULSE function; use short bursts. Allow the blades to stop
rotating between pulses. Do not use PULSE for more than 2 minutes.
• Use the Pulse button when preparing beverages that include ice cubes
or anything frozen; this helps to produce a smoother texture.
• It is helpful to begin the blending process on the lowest speed and then
increase to a higher speed, if necessary.
• To stop blending at any time, press the OFF button.
• Do not store foods in the blending jar.
• Do not overfill the blender (the blender is more efficient with less rather
than more).
• Do not run blender for longer than 1 ½ minutes at a time. Scrape down
sides of blending jar, if necessary, and continue blending.
• Do not use if blending jar is chipped or cracked.
• It is not recommended to use your blender to beat egg whites, mix
dough, mash potatoes, or grind meats.
DO NOT PLACE ANY OF THE FOLLOWING IN THE BLENDER:
• Large pieces of frozen foods
• Tough foods such as raw turnips, sweet potatoes and potatoes
• Bones
• Hard salami, pepperoni
• Hot liquids
6
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING
1. Before cleaning, turn off and unplug appliance.
2. Lift blending jar by handle off power base.
3. Remove jar base by turning counterclockwise until loose.
4. Remove gasket and blade assembly.
Caution: Blades are sharp, handle carefully.
5. Remove lid and lid cap.
6. Wash removable parts by hand or in your dishwasher. Place jar on bottom
rack and rest of parts on top rack only.
Important:
• Do not place jar parts in boiling liquids.
• Do not immerse base in liquid. Wipe base with damp cloth and dry
thoroughly.
• Remove stubborn spots by rubbing with damp cloth and nonabrasive
cleaner.
Note: If liquids spill onto base, wipe with damp cloth and dry thoroughly. Do
not use rough scouring pads or cleansers on parts or finish.
QUICK CLEANING
For quick cleanup, combine 1 cup warm water and a drop of liquid dish
soap in the blending jar. Cover and blend on Speed 4 for about 30 seconds.
Discard liquid and rinse jar thoroughly.
STORAGE
For convenient storage, wrap the cord around the feet on the bottom of the
blender base.
7
SPEED CHART
Pulse/Off
LOW
1) Stir
2) Blend
3) Crumb
4) Clean
5) Grate
HIGH
6) Beat
7) Puree
8) Liquefy
9) Smoothie
10) Ice Crush
• Use for thick mixtures
• Prepare sauces
• Remove lumps from gravies
• Reconstitute frozen juices, drink mixes and condensed
soups
• Prepare salad dressings
• Puree hot liquids
• Mix puddings
• Combine pancake and waffle batter or mixes
• Beat eggs for omelets and custards
• Make cookie, cereal and bread crumbs
• Combine drop of dishwashing liquid and hot water to clean
blender
• Grate hard cheeses and coconut
• Make superfine sugar
• Make cookie, cereal and bread crumbs
• Grind coffee beans, spices and chocolate
• Beat eggs for omelets and custards
• Puree baby foods – fruits and vegetables
• Blend protein drinks
• Liquefy frozen drinks
• Prepare smoothies and milkshakes
• Crush ice
TROUBLESHOOTING
PROBLEMPOSSIBLE CAUSESOLUTION
Jar bottom does not come
off of jar.
Liquid is leaking from
bottom of jar.
Appliance does not turn
on.
Mixture in blender does
not seem to be blending.
Herbs or bread are
sticking to sides of
blender and not getting
chopped.
Food chopped is too fine
or watery.
If additional assistance is needed, please contact our consumer service team at
8
A vacuum has been
formed.
Gasket is either missing or
not in place correctly.
Appliance is not plugged
in.
Not enough liquid in
mixture being blended or
too much ice.
Blender jar, food to be
chopped and blade are not
dry.
Food is over processed.Use Pulse in short bursts or blend
1-800-465-6070.
Place the jar on the blender and
turn counter clockwise until jar is
released from the bottom.
Check that jar is assembled
correctly.
Check that appliance is plugged
into a working outlet.
Turn the blender off and use a
rubber spatula to redistribute the
food; add some liquid and pulse
the mixture to aid in the blending
process.
Always make sure that the jar, the
blade and the food to be
chopped are dry.
for a shorter time.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.