DIGITAL BLENDING SYSTEM
QUICK START GUIDE
BL1800 SERIES
CONGRATULATIONS ON YOUR
PURCHASE OF THE BLACK & DECKER
FUSIONBLADE BLENDING SYSTEM!
USING YOUR BLENDER:
1. Make sure your appliance is off
and secure the blender
jar on the base
2. Add ingredients to be
blended into the blender jar.
The order is important!
Liquids | Powders | Soft Foods | Hard Foods | Ice
3. Place the lid securely on
the jar, plug in the blender
and press “ON | OFF”
to power on
4. Press the desired speed
or pre-set 30 second
smoothie button
5. When blended to desired
consistency press
STOP to stop blending
6. Press ON | OFF to turn off
blender, lift the jar off the base
*Layout of digital controls
may vary by model
and remove the lid to pour!
USING YOUR PERSONAL JAR
(Included in select models only)
1. Add ingredients. The order
Liquids | Ice | Hard Foods | Soft Foods | Powders
2. Cover with BLACK blade base.
*Ensure blade base is screwed on tightly
is important!
3. Flip jar over, place on base and turn
clockwise to lock into place
4. Blend, power off, unplug the
appliance and turn the jar counter
clockwise to remove from the base
*If the personal jar leaks or starts to open as you
remove it, stop and twist the jar tightly
clockwise. Hold the base and try turning
the entire jar counterclockwise.
5. Flip, switch lids and enjoy your
smoothie at home or on the go!
Purchase personal jars separately at:
www.blackanddeckerappliances.com
USING YOUR MINI JAR
Purchase a mini jar separately at:
www.blackanddeckerappliances.com
BLACK BLADE BASE GREY BLADE BASE
(Included in select models only)
1. Add dry ingredients you wish
to chop or grind
2. Cover with the GRAY blade base
labeled “GRIND”
3. Flip jar over, place on the base and
turn clockwise to lock in place
4. Power on, grind or chop your
ingredients and press
STOP when complete
*Never grind dry ingredients for
more than 30 seconds
BLEND. DO NOT USE TO GRIND
DRY HERBS AND GRAINS.
DO NOT USE TO BLEND
WET FOODS
Loading...