Should you have any questions or concerns with your new product,
please call our Customer Service Line at 1-800-465-6070 (US and
Canada). Please do not return to the store.
Si usted tiene alguna inquietud o pregunta con su producto, por
favor llame a nuestra línea de servicio al cliente una atención
inmediata 1-800-465-6070 (EE.UU/Canadá) 01-800-714-2503
(México). No devuela a la tienda.
2
PLEASE READ AND SAVE THIS USE AND CARE BOOK.
IMPORTANT SAFEGUARDS.
When using electrical appliances, always follow basic safety precautions to
reduce the risk of fire, electric shock, and/or injury, including the following:
• Read all instructions.
• To protect against risk of electrical shock, do
not put blender base, cord or plug in water or
other liquid.
• Close supervision is necessary when any
appliance is used by or near children.
• Turn the appliance OFF, then unplug
from the outlet when not in use, before
assembling or disassembling parts and
before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the
power cord.
• Avoid contacting moving parts.
• Do not operate any appliance with a
damaged cord or plug or after the appliance
malfunctions or is dropped or damaged in
any manner. Contact the consumer service
number listed in this manual. This appliance
has important markings on the plug blade.
The attachment plug or entire cordset (if
plug is molded onto cord) is not suitable for
replacement. If damaged, the appliance must
be replaced.
• The use of attachments, including canning
jars, not recommended or sold by the
appliance manufacturer may cause fire,
electric shock or injury.
• Do not use outdoors.
• Do not let the plug or cord hang over the edge
of table or counter.
• Do not place on or near a hot gas or electric
burner or in a heated oven.
• Keep hands and utensils out of container while
blending to reduce the risk of severe injury to
persons or damage to the blender. A scraper
may be used but must be used only when the
blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place blade
assembly on base without the jar properly
attached.
• Always operate blender with cover in place.
• Do not blend hot liquids.
• Do not use appliance for other than intended use.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
SAFETY FEATURES
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a
tamper-resistant screw to prevent removal
of the outer cover. To reduce the risk of fire
or electric shock, do not attempt to remove
the outer cover. There are no user-serviceable
parts inside. Repair should be done only by
authorized service personnel.
ELECTRICAL CORD
1) A short power-supply cord is provided to
reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
2) Extension cords are available and may be
used if care is exercised in their use.
3) If an extension cord is used,
a) The marked electrical rating of the
extension cord should be at least as great
as the electrical rating of the appliance,
b) If the appliance is of the grounded
type, the extension cord should be a
grounding-type 3-wire cord, and
c) The cord should be arranged so that it
will not drape over the countertop or
tabletop where it can be pulled on by
children or tripped over unintentionally.
Note: If the power cord is damaged, please
contact the warranty department listed in these
instructions.
3
GETTING TO KNOW YOUR
POWERCRUSH
MULTI-FUNCTION BLENDER
2
3
1
4
5
6
7
1. Dual-opening lid
(Part# BL1250-01) black
2. Pour spout
3. Ingredient slot
4. Blending jar (Part# BL1250-03)
5. Handle
6. Blade assembly
(Part# BL1250-04)
Product may vary slightly from what is illustrated.
4
10
8
9
11
7. Jar base
(Part# BL1250-02) red
8. Base (blender bases may
differ depending on model
number purchased)
9. OFF button
10. Speed buttons
11. Pulse buttons
HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers from the product, and the plastic
band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
Caution: Blades are sharp. Handle carefully.
3. Place jar base onto jar and rotate clockwise until it is tight.
4. Turn assembled jar right side up.
5. Place dual-opening lid on blending jar.
Note: Make sure the pour spout and ingredient slot are closed.
6. Unwrap power cord from storage area under the base.
7. Place jar assembly on base. (B).
8. Blender is now ready for use.
USING YOUR BLENDER
Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
Note: You must always add a liquid before blending.
3. Place lid on jar. Make sure the pour spout and ingredient slot are closed.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task.
(See SPEED CHART)
6. When blending thick mixtures, such as smoothies and
milkshakes, press the High Pulse button for several seconds,
then release. Repeat until food has desired consistency. (C)
5
Note: Use PULSE for no more than five seconds at a time,
allowing the blender to rest briefly between each pulse, no
more than two minutes total. This helps break up the ice and
distribute the ingredients.
7. Open the
is running. Drop ingredients through the opening. (D).
Important: Do not remove the lid while the blender is running.
8. When finished, press the OFF button. Make sure blades have completely
stopped before attempting to remove the blending jar from the base.
9. To remove the jar, grasp the handle and lift up.
10. Open pour spout to serve.
Note: Always unplug the appliance when not in use.
ingredient slot
to add ingredients while the blender
BLENDING TIPS AND TRICKS
• Cut food into pieces no larger than ¾” for use in the blender.
• When preparing foods that have several different kinds of ingredients,
always add liquid ingredients first.
• When ingredients splatter onto the sides of the jar or the mixture is
very thick, press the OFF button to turn appliance off. Remove the lid
and use a rubber spatula to scrape down the sides of the jar and to
redistribute the food, pushing food toward the blades. Replace the lid
and continue blending.
• When making bread crumbs make sure blender jar is completely dry.
• When using PULSE function; use short bursts. Allow the blades to stop
rotating between pulses. Do not use PULSE for more than 2 minutes.
• Use the High Pulse button when preparing beverages that include ice
cubes or anything frozen; this helps to produce a smoother texture.
• It is helpful to begin the blending process on the lowest speed and then
increase to a higher speed, if necessary.
• To stop blending at any time, press the OFF button.
• When blending hot ingredients, open the ingredient slot. Cover lid with
a cloth to avoid splattering and only use the lowest speed. Do not blend
more than 2 ½ to 3 cups at a time.
• Do not store foods in the blending jar.
• Do not overfill the blender (the blender is more efficient with less rather
than more).
• Do not run blender for longer than 1 ½ minutes at a time. Scrape down
sides of blending jar, if necessary, and continue blending.
• Do not use if blending jar is chipped or cracked.
• It is not recommended to use your blender to beat egg whites, mix
dough, mash potatoes, or grind meats.
6
DO NOT PLACE ANY OF THE FOLLOWING IN THE BLENDER:
• Large pieces of frozen foods
• Tough foods such as raw turnips, sweet potatoes and potatoes
• Bones
• Hard salami, pepperoni
• Boiling liquids (cool for 5 minutes before placing in blending jar)
USING THE PERSONAL BLENDER JAR
(Single serve jar purchased separately.)
Caution: Do not blend hot liquids in the personal jar.
1. Place the personal blender jar on a flat surface with the open end facing up.
Fill the jar with ingredients. Do not fill ingredients past the “20 oz.” marking.
Note: For best results, add ingredients in the following order:
a. Liquids
b. Ice
c. Hard Foods
d. Soft Foods
e. Powders
2. Place blade assembly in the jar opening with blades down.
3. Place jar base onto jar and rotate clockwise until it is tight. It is important
to tighten to prevent leaking during blending.
4. Turn personal jar upside down and place on the blender base.
5. Select the appropriate speed or use PULSE to blend to desired consistency.
6. Once blending has finished, remove the personal jar by lifting off the
base. Turn the jar over and place it on a flat surface.
Note: Always make sure blades have stopped moving before removing jar.
Important: If the jar gets stuck on the blending base or begins to loosen from
the jar base, follow these steps:
a. Unplug the unit
b. Turn the jar clockwise to tighten jar onto the jar base
7. Remove the jar base from the personal jar by turning counterclockwise.
Then carefully remove blade assembly
8. Place the personal jar drinking lid on the personal jar and enjoy your
delicious drinks on-the-go.
Caution: Blades are sharp. Handle carefully.
Note: The maximum rating is based on the blender jar attachment. The power
input of the optional personal jar is less than the allowable deviation.
7
SPEED CHART
SPEED
LOW
HIGH
LOW
PULSE
HIGH
PULSE
FUNCTIONUSAGE
Mix,
Milkshake,
Easy clean
Puree,
Icy drink,
Smoothie
Dice/Chop,
Salsa,
Crumb
Ice Crush
Prepare sauces, and remove lumps from gravies
Blend milkshakes and malts
Blend drop of soap with hot water to clean blender quickly
Puree fruits and vegetables
Liquefy frozen drinks
Prepare smoothies
Chop fruits, vegetables, and cooked meats
Create salsas
Make cookie, cereal and bread crumbs
Crush ice and frozen food
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING:
1. Before cleaning, turn off and unplug the appliance.
2. Lift the blending jar by the handle off the base.
3. Remove jar base by turning it counterclockwise until loose.
4. Remove the blade assembly.
Caution: Blades are sharp. Handle carefully.
5. Remove lid.
6. Wash removable parts by hand or in the dishwasher. Place the jar on the
bottom rack and the rest of the parts on the top rack only.
HELPFUL TIPS:
• For quick cleanup, combine 1 cup hot water and a drop of liquid dish soap
in the blending jar.
• Cover and blend on Easy Clean for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important:
• Do not place the jar parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note: Do not use rough scouring pads or cleansers on parts or finish.
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.