Black & Decker 5022K Instruction Manual

Black & Decker (U.S.) Inc. • 701 East Joppa Road, Towson, Maryland 21286

Printed in Italy (JUL96-2) Form No. 154706 Copyright © 1996

5022k/IM(7/2) 5/17/02 2:32 PM Page 2

Instruction Manual

5022K Demolition Hammer

5022k/IM(7/2) 5/17/02 2:32 PM Page 3

Getting the most out of your tool.

Please take time to read this manual and pay particular attention to the safety
rules we’ve provided for your protection. If you have any questions about your
tool please call:

1-800-9-BD TOOL

(1-800-923-8665)

Important Safety Instructions

WARNING: When using electric tools, basic safety precautions should
always be followed to reduce risk of fire, electric shock, and personal injury,
including the following:

READ ALL INSTRUCTIONS

Grounding Instructions

This tool should be grounded while in use to protect the operator from elec­tric shock. The tool is equipped with a 3-conductor cord and 3-prong
grounding type plug to fit the proper grounding type receptacle. The green
(or green and yellow) conductor in the cord is the grounding wire. Never
connect the green (or green and yellow) wire to a live terminal. If your unit is
intended for use on less than 150 V, it has a plug that looks like that shown in
sketch A. If it is for use on 150 to 250 V, it has a plug that looks like that
shown in sketch D. An adapter, sketches B and C, is available for connecting
sketch A type plugs to 2-prong receptacles. The green-colored rigid ear, lug,
or the like, extending from the adapter must be connected to a permanent
ground, such as a properly grounded outlet box. No adapter is available for a
plug as shown in sketch D. ADAPTER SHOWN IN FIGURES B and C IS NOT
FOR USE IN CANADA.

IMPORTANT SAFETY INSTRUCTIONS

LOCK-ON SWITCH

TOOL
HOLDER

SIDE HANDLE

CLAMP KNOB

AB CD

GROUNDING PIN

GROUNDED

OUTLET

BOX

GROUNDING

MEANS

GROUNDING PIN

ADAPTER

5022k/IM(7/2) 5/17/02 2:32 PM Page 4