Black Box AVSW-DVI8x8, VSW-DVI8x8 User Manual
8x8 DVI-D Matrix Switches
A high-performance matrix switch
for multiple video and audio signals.
Switch manually, from a remote control unit,
or via a simple-to-use RS-232 connection
and your computer.
February 2010
AVSW-DVI8x8
MT1000A-85-R4
VSW-DVI8x8
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: w ww.blackbox.com • E-mail : info@blackbox.com
FCC and Industry Canada Statements
Federal Communications Commission and Industry Canada Radio Frequency Interference
Statements
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict
accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emis sion from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de
la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
Page 2
We‘re here to help! If you have any questions about your application
or our products, contact Black Box Tech Support at 724 -746-5500
or go to blackbox.com and click on “Talk to Black Box.”
You’ll be live with one of our technical experts in less than 30 seconds.
724-746-5500 | blackbox.com
AVSW-DVI8x8
NOM Statement
Instrucciones de Seguridad
(Normas Oficiales Mexicanas Electrical Safety Statement)
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca
de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.
Todo otro servicio deberá ser referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes
que impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros
aparatos (incluyendo amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como
se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
AVSW-DVI8x8
Page 3
Trademarks
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Windows and Windows XP are registered trademarks of Microsoft Corporation.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Page 4
724-746-5500 | blackbox.com
AVSW-DVI8x8
Table of Contents
Table of Contents
1.0 Specifications .............................................................................................................................................................................. 6
2.0 Safety .................................................................................................................................................................................. 8
3.0 Introduction .................................................................................................................................................................................. 9
3.1 About the 8X8 DVI-D Matrix Switch ........................................................................................................................................ 9
3.2 What‘s Included ....................................................................................................................................................................... 9
3.3 Front and Rear Views .............................................................................................................................................................10
4.0 Installation .................................................................................................................................................................................11
4.1 Connecting Using Input and Output Terminals ........................................................................................................................12
4.2 Connecting and Setting up Audio ...........................................................................................................................................14
5.0 Operation and Control .......................................................................................................................................................................15
5.1 RS-232, LAN and Third-Party Control ......................................................................................................................................15
5.2 Front Control/Operation .........................................................................................................................................................15
5.3 Entering a Sequence of Commands on the Front Control Panel ...............................................................................................17
5.4 Remote Control Operation ......................................................................................................................................................18
5.5 Operation of the Application Software ...................................................................................................................................19
5.6 Operating the Unit through the RS-232 Connection............................................................................................................... 20
6.0 Troubleshooting .................................................................................................................................................................................21
6.1 Contacting Black Box ..............................................................................................................................................................21
6.2 Shipping and Packaging ..........................................................................................................................................................21
AVSW-DVI8x8
Page 5
Chapter 1: Specifications
1.0 Specifications
Specifications — Video
Bandwidth — 165 MHz, all digital
Clock Jitter — < 0.15 Tbit
Distance (Maximum) — Input: < 36 m, 1920 x 1200 @ 60 Hz;
Output: < 7 m, 1920 x 1200 @ 60 Hz
Error in DC Offset — 15 mV
Fall Time — < 0.3T bit (20–80%)
Gain — 0 dB
Input EDID — Default EDID
Transfer Delay (Maximum) — 5 nS (±1nS)
Maximum/Minimum Level — TMDS 2.9 V / 3.3 V
Resolution (Maximum) — 1920 x 1200 @ 60 Hz
Resistance — Video input and output: 50 ohms
Rise Time — < 0.3 Tbit (20–80%)
Signal Strength — TMDS +/- 0.4Vpp
Signal Type — DVI-D digital TMDS signal
Switching Speed — 200 ns (maximum)
Specifications — Audio (AVSW-DVI8X8 only)
CMRR — >75 dB @ 20 Hz – 20 kHz
Frequency — 20 Hz – 20 kHz
Gain — 0 dB
Gain Offset — ±0.1 dB
Input Level (Maximum) — +19.5 dBu, balanced or unbalanced
Noise — 0.03% @ 1 kHz rating voltage
Output Level (Maximum) — +19.5 dBu, balanced or unbalanced
Resistance — Input: >10 k ohms balanced or unbalanced
Output: 50 ohms unbalanced, 100 ohms balanced
S/N — >90 dB
Signal Type — Stereo, balanced or unbalanced
Stereo Separation — >80 dB @ 1 kHz
Page 6
724-746-5500 | blackbox.com
AVSW-DVI8x8
Specifications — Control
Baud Rate and Protocol — Baud rate: 9600; data bits: 8; stop bits: 1; parity bit: none
Control Application — Switch 2.0
Serial Control Port — RS-232
Serial Control Poling Protocol — 2 = TX, 3 = RX, 5 = GND
Speed — Full /half-duplex 10/100M
Specifications — Physical
Connectors — (16) DVI-D F; (1) DB9 F; 1 RJ-45, (16) 3.8-mm screw connectors
MTBF — 30,000 hours
Operating Environment — Temperature: -4 to +158° F (-20 to +70° C)
Humidity: 10 to 90%
Power — Input: 100 – 240 VAC, 50/60 Hz, IEC 320
Chapter 1: Specifications
Size — 5.3"H x 10.2"W x 16.9"D (13.4 x 26 x 43 cm)
Weight — 9.3 lb. (4.2 kg)
AVSW-DVI8x8
Page 7
Chapter 2: Safety
2.0 Safety
To ensure user safety, please comply with the following items during the installation, maintenance, and operation of the 8X8
DVI-D Matrix Switch.
1) The Matrix Switch must be in stable position. Use only the power supply that comes with unit. Using an unauthorized power
supply may damage the unit.
2) Do not place the Matrix Switch near hot or cold surfaces or sources.
3) To avoid damage from overheating, make sure there is good ventilation, which is necessary to radiate the heat when operating
the Matrix Switch.
4) The Matrix Switch should be turned off when it is not in use.
5) Do not attempt to remove the cover from the unit; high-voltage components inside could cause electric shock.
6) Do not splash any liquids or chemicals on or near the equipment.
7) Make sure all the cables are in good working condition; do not use cut or damaged cables.
NOTE: The operating instructions given in this user‘s manual can be used with other DVI Matrix Switch models from Black Box;
however, for any maintenance information, consult the user‘s guide for those specific products.
Page 8
724-746-5500 | blackbox.com
AVSW-DVI8x8
Loading...