Black Box TS620A, TS621, TS622, TS623 Specifications

1

10/100BASE-T testing
at an affordable price.

Easy installation.

Large display and
LEDs keep you up to
date on faulty wiring.

Supports up to eight
remote units.

T

he LOCALMAP 100 checks for

all wiring faults found in
10/100BASE-T cabling including
open pairs, shorted pairs, crossed
pairs, reversed pairs, and split
pairs— on up to eight cables!

Installation takes just seconds.
Simply plug a remote unit
(included) into a wall jack and
attach your LOCALMAP 100 to
the other end of the cable.

When you press the start
button, the tester automatically
runs all tests and displays the
results on a large display. Red or
green LEDs indicate if pairs are
wired correctly.

With the tester, you can verify
or identify up to eight individual
cables. All you need are

Test all types of 10/100BASE-T

cabling with this affordable scanner.

Key Features

LOCALMAP 100 CABLE TESTER

additional remote units, which are
numbered for easy identification.

Order the tester alone,
or choose from two types of
testing kits:

• Identifier Kit for Plugs
Labeled 2, 3, and 4 features
the LOCALMAP 100 plus
three additional remote
units. With it, you can test
up to four wire pairs.

• Identifier Kit for Plugs
Labeled 5, 6, 7, and 8 gives
you four more remote units
for a total of eight. With it,
you can test up to eight
wire pairs.

When you need to take the
tester with you, you can order an
optional carrying case to hold
your LOCALMAP 100 and up to
eight remote units.

Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [e-mail]

© 2003. All rights reserved.

Black Box Corporation.

11/21/2003 #12025

The LOCALMAP 100 is the perfect cable-testing tool for networks
that rely on one system-support technician. The tester lets one user
check for all 10/100BASE-T wiring faults.

Typical Application

1/2 3/8 4/5 7/8

PAIRS TEST

GREEN

- PASS

RED

FAULTS/

CABLE LD.

1 - 8

O-OPEN
S-SHORT
R-REVERSED

PUSH TO TEST

FAULT CODES

- FAIL

SP-SPLIT PAIRS
C-CROSSED PAIRS
B-LOW BATTERY

1

2

3

4

2

• LOCALMAP 100: the LOCALMAP 100 and one remote unit

• Identifier Kit for Plugs Labeled 2, 3, and 4: LOCALMAP 100 and
three additional remote units

• Identifier Kit for Plugs Labeled 5, 6, 7, and 8: LOCALMAP 100 and
seven additional remote units

• Users’ manual

Cable Length: Up to 100 m (328 ft.)

Connectors: (1) RJ-45

Indicators: (8) LEDs: (4) red,

(4) green;

(1) single-digit, 16-segment

display

Power: TS620A: (1) 9-volt alkaline

battery;

Remote units: None

Size: TS620A: 1.3"H x 2.8"W x 3.7"D

(3.3 x 7.1 x 9.4 cm);

Remote units:

0.5"H x 1.1"W x 2.4"D
(1.3 x 2.8 x 6.1 cm)

Weight: TS620A: 0.4 lb. (0.2 kg);

Remote units: <0.1 lb. (<0.1 kg)

The Complete Package

• With the push of a button, the LOCALMAP 100 automatically runs
all 10/100BASE-T cabling tests and turns itself off.

• Four green LEDs signal that pairs 1/2, 3/6, 4/5, and 7/8 are wired
correctly. Red LEDs indicate failure.

• Common faults include open pair, shorted pair, split pairs,
reversed pairs, short between pairs, open/short between pairs,
and crossed pairs.

• Since the LOCALMAP 100 will not operate properly with a low
battery, the display flashes the letter “L” four times in rapid
succession to alert you to low battery voltage.

Technically Speaking

Specifications

Ordering Information

ITEM CODE

LOCALMAP 100 Cable Tester....................................TS620A

Identifier Kits

Plugs Labeled 2, 3, and 4...........................................TS621

Plugs Labeled 5, 6, 7, and 8.......................................TS622

LOCALMAP 100 Carrying Case ...................................TS623

Recognize any of these
situations?

• You wait more than 30

minutes to get through to a
vendor’s tech support.

• The so-called “tech” can’t

help you or gives you the
wrong answer.

• You don’t have a purchase

order number and the tech
refuses to help you.

• It’s 9 p. m. and you need help,
but your vendor’s tech
support line is closed.

According to a survey by Data
Communications magazine, 90%
of network managers surveyed
say that getting the technical
support they need is extremely
important when choosing a
vendor. But even though network
managers pay anywhere from 10

to 20% of their overall purchase
price for a basic service and
support contract, the technical
support and service they receive
falls far short of their
expectations—and certainly isn’t
worth what they paid.

At Black Box, we guarantee
the best value and the best
support. You can even consult our
Technical Support Experts before

you buy if you need help selecting
just the right component for your
application.

Don’t waste time and

money—call Black Box today.

Why Buy From Black Box? Exceptional V alue.Exceptional Tech Support.Period.