Black Box TS610A Specifications

1

Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [e-mail]

Detects signal and
ground pins for baluns
with an RJ-11 or RJ-45
connector.

Tests BNC or twin­axial baluns.

Includes a low-battery
indicator and battery
self-test LED.

O

ne wrong balun and your entire

system won’t work. But with
the Balun Tester Kit, you can test
baluns on-site in a matter of
seconds—compared to hours of
frustration through trial and error.

You can use this tester kit with

most popular types of baluns,

With the Balun Tester Kit, you

won’t have to guess which pin is

signal and which pin is ground.

Key Features

BALUN TESTER KIT

7/26/2005 #12685

Ordering Information

ITEM CODE

Balun Tester Kit............................................................TS610A

including those with RJ-11 or
RJ-45 pins. The tester tells you
which pin is signal and which is
ground. It includes a BNC/twin­axial connector adapter for test­ing both BNC (IBM

®

3270) and

twinaxial (IBM 3X, AS/400

®

)

baluns (with or without a pigtail).

The tester also includes six
LEDs, one for each pair of active
pins, one for polarity, and one for
low battery or battery self-test.

The device’s compact and
lightweight design makes it
convenient to use on any job site.

Switch: SW 1: Balun tester;

SW 2: Reserved;
SW 3: Self-test

Connectors: Tester: (1) BNC female,

(1) RJ-45;
BNC/twinaxial connector
adapter: (1) BNC male to female

twinaxial

Indicators: (6) LEDs: (4) Signal

Ground/Ground Signal Active
(Pins 1-2, 3-6, 4-5, 7-8), (1) Polarity
On/Off, (1) Battery Self-Test
On/Off/Low Battery

Power: (4) 1.5-volt AA batteries

Size: 6"H x 2.5"W x 0.9"D

(15.2 x 6.4 x 2.3 cm)

Weight: 1.5 lb. (0.7 kg)

Specifications

© 2005. All rights reserved.

Black Box Corporation.