1
Transparent to data
rates up to 64 kbps.
Synchronous and
asynchronous data
transmission.
Choose either
hardware or roundrobin priority to select
terminal ports.
Front-panel switches
enable and disable
RTS on each input port.
Jumper-selectable
options include RTS
delay, RXD operation,
RTS-timeout period,
and data-timeout
signal.
W
ith the RS-232 Data Sharer,
you save the cost of extra
modems and leased phone lines
for your RS-232 systems. Connect
up to 2, 4, or 8 RS-232 devices to a
single modem and phone line.
Depending on the size of your
system, choose either a 2-Port,
4-Port, or 8-Port model. All three
models feature transparent
operation (up to 64 kbps) and LED
monitoring.
By cascading two data
sharers together, you can
connect up to 15 devices to your
RS-232 line.
The Data Sharers work with
synchronous or asynchronous
devices.
You control which ports can
access the modem at any given
time. Simply toggle the RTS
switches conveniently located on
the front panel of the Data Sharer
to enable or disable RTS for a
particular port. If RTS is disabled,
PWR
MASTER PORT
CTS CD RXD
RTS DISABLED
RTS ENABLED
RTS STATUS
A B C
D E
F G H
RS-232 DATA SHARER-8
MASTER PORT
CTS CD RXD
RTS DISABLED
RTS ENABLED
PWR
RTS STATUS
A
B
RS-232 DATA SHARER-2
Cut equipment costs and phone charges by
using a single phone line and modem for up
to 2, 4, or 8 RS-232 devices.
Key Features
2-PORT,4-PORT,AND 8-PORT RS-232 DATA SHARERS
the Data Sharer will ignore
attempts to access the modem by
the device attached to that port.
The 4- and 8-Port models can
be polled sequentially for RTS, or
you can set a jumper to give
certain ports priority over others.
The Data Sharers work with
popular IBM communications
protocols, including half-duplex
Bisynchronous communication
and Synchronous Data Link
Control (SDLC).
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: info@blackbox.com
© 2005. All rights reserved.
Black Box Corporation.
11/2/2005 #10920
Connect the IBM mainframe at your central office to several IBM
controllers at a branch office across the country.
Share one modem among several PCs in an office to connect to the
async mainframe in your company’s computer room.
Typical Applications
2
The RS-232 Data Sharer works in synchronous or asynchronous applications to adapt
to your existing equipment.
IBM Controllers
(5294, 3274, etc.)
4-Port RS-232
Data Sharer
4-Port RS-232
Data Sharer
Up to 8 IBM
Controllers
7 IBM
Controllers
8-Port RS-232
Data Sharer
8-Port RS-232
Data Sharer
Leased Line
Modem
Modem
Modem
Modem
IBM Mainframe
Async Mainframe
Synchronous application—an RS-232 Data Sharer in an IBM®multipoint environment.
PCs with Communication Software
RS-232 Line
RS-232 Lines
Asynchronous application—an RS-232 Data Sharer providing four PCs with
access to an async host.
Front-End
Processor
RS-232 Cable
RS-232 Cable
Connect up to 15 remote controllers to a front-end processor by cascading
RS-232 Data Sharers.
3
The RS-232 Data Sharer has LEDs, RTS toggle switches, and
jumpers for easy configuration and diagnostics.
• LEDs include PWR, “slave port” RTS, and “master port” CD, CTS,
and RXD.
• There is one RTS toggle switch for each “slave port.” Use these
switches to enable or disable the Sharer’s detecting an RTS signal
on any of the slave ports. Disabling a port’s RTS detection will
prevent that port’s device from accessing the modem or CPU. This is
useful if you want to isolate a slave device, especially if the device is
malfunctioning.
• Using jumper W1, you can tie signal ground to frame ground.
• With jumper W2, you can set the amount of time you want the RTS
signal to delay as it passes through the Data Sharer from a slave
port to the master port.
• How you set jumper W3 determines whether the Sharer will
broadcast data out of all slave ports, or out of only the active ports.
• Jumper W4 determines whether the slave ports will be (a) polled
for RTS sequentially, or (b) prioritized with Port A given the highest
priority and Port D or H the lowest.
• A set of “timeout” jumpers keeps a slave from monopolizing the
master.
Protocol — Async or sync
Operation — Full- or half-duplex
Data Rates — Transparent to all
data rates up to 64 kbps
Contention Type — RTS/CTS
User Channels — TL601A(E)-R2: 2;
TL553A(E)-R3: 4; TL554A(E)-R3: 8
Clock Source — External (provided
by DCE)
User Controls — Front-panel
switches: RTS enabled/disabled;
Jumpers: RTS Delay (0 or 25 ms),
RXD Broadcast or Gated Mode;
RTS Timeout Period (10 or
30 seconds or none); RTS
Timeout Signal (RXD only or RXD
and TXD)
Pins Supported — DB25 pins 1–10,
15, 17, 20, 22
MTBF — TL601A-R2: 180,000 hours;
TL553A-R3: 95,000 hours;
TL554A-R3: 65,000 hours
Enclosure — Steel
Interface — Serial EIA RS-232C/
CCITT V.24; Master Port: DTE;
Slave Ports: DCE
Connectors —
TL601A(E)-R2: (3) DB25 female;
TL553A(E)-R3: (5) DB25 female;
TL554A(E)-R3: (9) DB25 female
Indicators — TL601A(E)-R2: (6) LEDs
(Power, RTS A, RTS B, Master
Port CD, CTS, and RXD);
TL553A(E)-R3: (8) LEDs (Power,
RTS A through RTS D), Master
Port CD, CTS, and RXD);
TL554A(E)-R3: (12) LEDs (Power,
RTS A through RTS H, Master
Port CD, CTS, and RXD)
Operating Temperature —
32 to 140°F (0 to 60°C)
Storage Temperature —
-4 to +158°F (-20 to +70°C)
Humidity — Up to 95%,
noncondensing
Power — TL553A-R3, TL554A-R3,
TL601A-R2: From wallmount
power supply PS154: Input:
115 VAC, 60 Hz @ 100 mA;
Output: 17 VAC CT @ 700 mA;
TL553AE-R3, TL554AE-R3,
TL601AE-R2: From in-line power
supply PS154E: Input: 230 VAC,
50 Hz @ 50 mA; Output: 17 VAC
CT @ 750 mA
Size — TL601A(E)-R2:
2.5"H x 8.1"W x 11.3"D
(6.4 x 20.6 x 28.7 cm);
TL553A(E)-R3, TL554A(E)-R3:
2.9"H x 12.5"W x 11.1"D
(7.4 x 31.8 x 28.2 cm)
Weight —
TL601A(E)-R2: 2.4 lb. (1.1 kg);
TL553A(E)-R3: 5 lb. (2.3 kg);
TL554A(E)-R3: 5.5 lb. (2.5 kg)
Technically Speaking
Specifications
Ordering Information
ITEM CODE
2-Port RS-232 Data Sharer (115 VAC) ...............TL601A-R2
2-Port RS-232 Data Sharer (230 VAC).............TL601AE-R2
4-Port RS-232 Data Sharer (115 VAC) ...............TL553A-R3
4-Port RS-232 Data Sharer (230 VAC).............TL553AE-R3
8-Port RS-232 Data Sharer (115 VAC) ...............TL554A-R3
8-Port RS-232 Data Sharer (230 VAC).............TL554AE-R3
NOTE: 115-VAC models include wallmount power
supply PS154; 230-VAC models include in-line power
supply PS154E
Loading...