February 2010
MT1000A-85-R4
In-Line Surge Protector, RS-232 (DB9 9-Wire)
Get convenient avalanche diode protection for
your RS-232 DB9 connections.
Put avalanche diode technology
where you need it.
SP361A-R2
Specifications
Application: RS-232
Ground Wire: Yes
Maximum Shunt Capacitance: <30 pF
Peak Pulse Current: 60 amps
Pins Protected: All
Protection Type: Avalanche diode technology
Response Time: <5 ns
Series Resistance: None
Standard Clamping Voltage: 18 volts
Connectors: (1) DB9 M, (1) DB9 F
Overview
The SP361A-R2 DB9 Surge Protector is a bipolar device
(protects against positive or negative surges) that guards
against induced transient or surge energies caused by nearby
AC power lines, lightning strikes, and static discharge.
What’s included
• In-Line Surge Protector
• Specification sheet
For installation instructions, turn this page over…
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: w ww.blackbox.com • E-mail : info@blackbox.com
Installation Steps
1. Disconnect the cable from the equipment’s serial port.
2. Connect the surge protector to the equipment’s serial port.
3. Connect the ground wire to the equipment chassis.
4. Reconnect the communications cable to the surge protector.
© Copyright 2010. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™
is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
SP361A-R 2, rev.1
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
Loading...