Black Box SMM2-2U User Manual
SMM2-2U
Sliding Monitor Mount, 2- or 4-Post, 2U
Mount a 15", 17", or 19" monitor in a 2- or 4-Post
2U cabinet or rack.
Monitor NOT included.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. c all 724-746-550 0)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address : Black Box Corporation, 10 00 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail : info @blackbox .com
Specifications/What’s Included
1. Specifications
Monitor — 15", 17", or 19" flat display
Mounting — Rack units: 2U;
Depths: 15.5"–23.5" and 23.5"–31.5"
Rail Compatibility — M6 (square hole) and tapped (10-32 and 12-24)
VESA — 75 mm and 100 mm
2. What‘s Included
Your package should include the following items. If anything is missing
or damaged, contact Black Box Technical Support at 724-746-5500
or info@blackbox.com.
• (1) 2U sliding monitor tray
• (2) 2U adapter brackets (13.5" deep)
NOTE: Works with 15", 17", or 19" monitor (NOT included).
Adapter bracket hardware:
• (8) 12-24 hex bolts
Hardware pack:
• (1) cable arm mount bracket
• (1) power cable, 5-15p to IEC320 C13, 10-ft. (3.2-m)
• (1) VGA cable, 10 ft. (3.2-m)
Generic monitor hardware:
• (4) 1⁄2" (25-mm) white nylon spacers
• (4) 1⁄8" (12-mm) white nylon spacers
• (4) pan-head screws M4 x 6-mm
• (4) pan-head screws M4 x 25-mm
• (4) pan-head screws M4 x 30-mm
17"/19" monitor hardware:
• (4) 1/4" (14-mm) white nylon spacers
• (4) pan-head screws M4 x 30-mm
Page 2
724-746-5500 | blackbox.com
SMM4 -2U
What’s Included/Installation Instructions
Rackmount hardware:
• (8) 12-24 x 1⁄2" pan-head screws
• (8) 10-32 x 1⁄2" pan-head screws
• (8) 12-24 cage nuts
• (8) 10-32 cage nuts
Rear hardware:
• (6) 8-32 x 3/8" pan-head screws
• (6) 8-32 nuts with star washers
3. Installation Instructions
Step 1: Mounting depth: Measure the mounting depth for your rack
from the front of the front-mounting surface to the back
of the back-mounting surface.
4-post cabinet
Double 2-post
2-post with
adapter brackets
Mounting depth
Mounting depth
Figure 1. Mounting depth measurements.
Step 2: If mounting in a 2-post rack, attach the 2U adapter brackets to the 2-post
rack before installing the 2U sliding monitor tray.
Step 3: 23.5" to 31.5": Install the rear rack brackets as shown in Figure 2 for this
mounting depth range (see Step 5 for assembly).
Mounting depth 23.5"–31.5"
Figure 2. Mounting depth: 23.5" to 31.5".
SMM4 -2U
724-746-5500 | blackbox.com
Page 3
Loading...