Black Box QCE12U, QCE42U, QCE24U User Manual

QCE12U

QCE24U
QCE42U

QuietCab Elite™ Cabinet Assembly Instructions

Make sure you have the following items:

A. (1) base

B. (4) caster plates

C. (4) load-bearing casters with (16) M6 pozi pan screws

D. (4) corner posts with (16) M6 pozi pan screws

E. (4) mounting angles with (16) M6 pozi pan screws

F. (72) M6 pozi pan screws

G. (32) M6 socket button screws

H. (1) 4-mm Allen key

I. (1) top cover

J. (4) depth-support rails with (16) M6 pozi pan screws

K. (4) infills with (24) M6 pozi screws

L. (8) 16-mm gasket foam side panels

M. (8) 100-mm front and rear gasket foam panels

N. (1) anti-recirculation kit ([5] pieces per side

and [6] pieces for top and bottom front)

Follow these instructions to assemble your QuietCab Elite
Cabinet:

STEP 1. Install the (4) caster plates (Item B) onto the base
(Item A).

STEP 2. Secure the casters (Item C) to each plate (Item B)
using (4) M6 pozi pan screws (Item F).

STEP 3. Position the corner posts (Item D) onto the base
(Item A) and secure with M6 socket button screws (Item G)
using the 4-mm Allen key (Item H).

O. (2) side panels

P. (1) front left door

Q. (1) front right door

R. (1) rear left door

S. (1) rear right door

© Copyright 2012. Black Box Corporation. All rights reserved. Black Box and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies,

Inc. Any third- party trademarks appearing in this document are acknowledged to be the property of their respective owners.

724 -746 -5500 | blackbox.com

Page 1

STEP 4. Install the top cover (Item I) onto the (4) corner posts
(Item D). Secure in place with M6 socket screws (Item G)
using the Allen key (Item H).

STEP 5. Position the (4) mounting angles (Item E) and secure
them in place with M6 pozi pan screws (Item F).

NOTE: Make sure you use the deepest product to gauge

the distance between front and rear mounting angles.
Leave a distance of 1.9” (50 mm) between any
mounted equipment and the front and rear doors.

STEP 6. Install the (4) depth-support rails (Item J) to both
cabinet sides (top and bottom) using (4) M6 socket button
screws (Item G).

’

Page 2

724 -746 -5500 | blackbox.com